Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-18-2003, 08:05 PM | #1 |
Registered User
Join Date: May 2002
Posts: 18
|
Hard to get into 4wd and kicks out
My 1972 k10 seems to be getting harder and harder to get into 4wd. When I put the transfer case into 4wd and start to move, I hear a grinding type of noise when it should be engaged but isn't. It also kicks out of 4wd occasionally. I have a NP205. Any ideas?????????
__________________
1972 1/2 ton 4x4 1995 S-10 (Gas Saver) 1998 Caravan (Wife's) |
03-20-2003, 01:33 AM | #2 |
At Last. . .
Join Date: Jan 2003
Location: Portland, OR
Posts: 179
|
Bad actuator would be my guess (I had similar symptoms a few years ago on mine and thats what it ended up being). I think a new one would probably run you about $50 or so. . .
While you're down there, check the gear oil level - in my experience they have a nasty habit of slowly losing oil due to seepage over a long time - might be a related problem or at the very least some good preventive maintenance.
__________________
----------------------------------------------- 1988 GMC Sierra "K" 2500 4x4 5.7L TBI Daily Driver / Project / Obsession / Money Pit ------------------------------------------------ Current Tasks: Front-End Rebuild Brakes & Rotors A/C System (Clardy) ------------------------------------------------ It never ends. . . |
Bookmarks |
|
|