Need some ID help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dubie · 03-20-2003, 01:53 PM

I ran the following block # into mortec.com and this is the options

3970010....302.....69....4...Z-28 Camaro
3970010....327.....69....2...Trucks and industrial
3970010....350...69-80...2 or 4
How do I know what this is?

dubie · 03-20-2003, 01:54 PM

And this is the casting from the heads

333882.....74-80...350/400......76cc chambers

1972chevy4x4 · 03-20-2003, 02:03 PM

Hey dubie, by the head number I would say you have the later model 350, but another way to check is by the id number to the left of the water pump in front of the passenger head. This will give you engine code and years of vehicles placed in. Not sure if it will tell you wheather two or four bolt though.

Rod · 03-20-2003, 02:18 PM

You were at the right site for how to find date codes also.... read on http://www.mortec.com/location.htm

Rod · 03-20-2003, 02:22 PM

And for heads look here... at the same site.

http://www.mortec.com/locatpg2.htm

03-20-2003, 01:53 PM	#1
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Need some ID help I ran the following block # into mortec.com and this is the options 3970010....302.....69....4...Z-28 Camaro 3970010....327.....69....2...Trucks and industrial 3970010....350...69-80...2 or 4 How do I know what this is? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

03-20-2003, 01:54 PM	#2
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	And this is the casting from the heads 333882.....74-80...350/400......76cc chambers __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

03-20-2003, 02:03 PM	#3
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	Hey dubie, by the head number I would say you have the later model 350, but another way to check is by the id number to the left of the water pump in front of the passenger head. This will give you engine code and years of vehicles placed in. Not sure if it will tell you wheather two or four bolt though. __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-20-2003, 02:18 PM	#4
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	You were at the right site for how to find date codes also.... read on http://www.mortec.com/location.htm Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

03-20-2003, 02:22 PM	#5
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	And for heads look here... at the same site. http://www.mortec.com/locatpg2.htm Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.