BIG BLOCK MOUNTS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

super72bb · 03-25-2002, 08:06 PM

Can someone confirm this...... The 1972 402 BB C10 came with either one of two different motor mount brackets. One style was a carry forward from the previous years (the same you would likely find in say a 69,70 or 71) it looks kinda like the small block brackets. The other style which was more commonly found was the 3 piece per/side more of a straight tower and a cup style bracket that bolts to the block with the rubber mount in between.

My question is has anyone seen the earlier style brackets on a 72, or did they just use the one style in 1972?

Thanks

**jerry moss** · 03-25-2002, 08:21 PM

i've only seen the 72 style on 72s but it is very possible some early 72s could have got carry overs from 71. i've owned a couple 72 big block trucks and they had 72 style mounts.

------------------
jerry
72 cheyenne super K20
72 cheyenne K20
72 custom K20 - FOR SALE
79 K-5
90 SS454 PICKUP
BRENTWOOD,CALIFORNIA

yeyo454 · 03-25-2002, 10:15 PM

I put in a 454 from a 1982 suburban. The brackets i used where from that same suburban. They bolted on with not much work.

Hope this helps.

03-25-2002, 08:06 PM	#1
super72bb Senior Member Join Date: Jan 2002 Location: calgary,Alberta,Canada Posts: 387	BIG BLOCK MOUNTS Can someone confirm this...... The 1972 402 BB C10 came with either one of two different motor mount brackets. One style was a carry forward from the previous years (the same you would likely find in say a 69,70 or 71) it looks kinda like the small block brackets. The other style which was more commonly found was the 3 piece per/side more of a straight tower and a cup style bracket that bolts to the block with the rubber mount in between. My question is has anyone seen the earlier style brackets on a 72, or did they just use the one style in 1972? Thanks __________________ 1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181

03-25-2002, 08:21 PM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	i've only seen the 72 style on 72s but it is very possible some early 72s could have got carry overs from 71. i've owned a couple 72 big block trucks and they had 72 style mounts. ------------------ jerry 72 cheyenne super K20 72 cheyenne K20 72 custom K20 - FOR SALE 79 K-5 90 SS454 PICKUP BRENTWOOD,CALIFORNIA __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-25-2002, 10:15 PM	#3
yeyo454 Registered User Join Date: May 2001 Location: hollister Posts: 23	I put in a 454 from a 1982 suburban. The brackets i used where from that same suburban. They bolted on with not much work. Hope this helps.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.