'69 GMC Horn badge: How's It Come Off??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bud45 · 04-28-2009, 01:29 PM

I've done everything I know but put a big screwdriver under it and pry! How does the horn button come off without breaking it?

I have to get to the turn signal mechanism and don't want to have to buy a horn button....thanks, all!

Bud

**gerfunken** · 04-28-2009, 02:20 PM

I used two smaller screwdrivers and pried.... my Chevy horn badge came out with very little resistance.

bud45 · 04-28-2009, 03:14 PM

OK, gerfunken...did you pry from the top, perhaps, or opposite sides? Thanks!

BLACK AND BLUE 67-72 · 04-28-2009, 04:35 PM

Just grab it and pull up hard on it.

**gerfunken** · 04-28-2009, 05:14 PM

I pried from opposing sides to try and bring it out straight.

**gerfunken** · 04-28-2009, 05:17 PM

It's a pressure seat, where the bottom of the cap is a bit larger, and it sits inside a metal cup that works like a big spring.

**Papa Smurf** · 04-28-2009, 08:08 PM

Not trying to hijack thread, but is there a way to restore the finish on the colored horn caps? I know the color goes all the way thru, but the surface color is gone.

bud45 · 05-01-2009, 02:26 PM

Quote:

Originally Posted by Papa Smurf

Not trying to hijack thread, but is there a way to restore the finish on the colored horn caps? I know the color goes all the way thru, but the surface color is gone.

Papa Smurf, I have the same problem...so, I think I'll try and get some Testers hobby paint and do a little mixing, if I can't find the right shade. Probably test it on the rear of the button (when I get it off!) before I paint the front side....

Let me know what you try, as well....Bud

04-28-2009, 01:29 PM	#1
bud45 Registered User Join Date: Nov 2004 Location: Satsuma, AL Posts: 72	'69 GMC Horn badge: How's It Come Off??? I've done everything I know but put a big screwdriver under it and pry! How does the horn button come off without breaking it? I have to get to the turn signal mechanism and don't want to have to buy a horn button....thanks, all! Bud

04-28-2009, 02:20 PM	#2
gerfunken Registered User Join Date: Feb 2009 Location: Surprise, AZ Posts: 490	Re: '69 GMC Horn badge: How's It Come Off??? I used two smaller screwdrivers and pried.... my Chevy horn badge came out with very little resistance.

04-28-2009, 03:14 PM	#3
bud45 Registered User Join Date: Nov 2004 Location: Satsuma, AL Posts: 72	Re: '69 GMC Horn badge: How's It Come Off??? OK, gerfunken...did you pry from the top, perhaps, or opposite sides? Thanks!

04-28-2009, 04:35 PM	#4
BLACK AND BLUE 67-72 Firefighter Join Date: Feb 2001 Location: Yellville, Ar, USA Posts: 1,943	Re: '69 GMC Horn badge: How's It Come Off??? Just grab it and pull up hard on it. __________________ '72 Chevy SWB 350 Auto '67 GMC LWB 350 4 speed '70 Chevy 4x4 Stepside 350 Auto Yellville, Ar. USA

04-28-2009, 05:14 PM	#5
gerfunken Registered User Join Date: Feb 2009 Location: Surprise, AZ Posts: 490	Re: '69 GMC Horn badge: How's It Come Off??? I pried from opposing sides to try and bring it out straight.

04-28-2009, 05:17 PM	#6
gerfunken Registered User Join Date: Feb 2009 Location: Surprise, AZ Posts: 490	Re: '69 GMC Horn badge: How's It Come Off??? It's a pressure seat, where the bottom of the cap is a bit larger, and it sits inside a metal cup that works like a big spring. Attached Images

04-28-2009, 08:08 PM	#7
Papa Smurf Active Member Join Date: Feb 2009 Location: Ben Wheeler, TX Posts: 119	Re: '69 GMC Horn badge: How's It Come Off??? Not trying to hijack thread, but is there a way to restore the finish on the colored horn caps? I know the color goes all the way thru, but the surface color is gone. __________________ 72 Sierra Grande 2500 BB 72 Sierra 2500, 42K miles, factory buckets 72 Cheyenne 20 72 Chevy SWB, Factory BB, Leaf Spring



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.