700R4 N' New Process transfer case??????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

warpig98 · 04-30-2009, 09:52 PM

i need a measurement of how high the transfer case shifter comes up through the floor. and also the measurement of the distance it moves from all the way forward to back. would prefer exact measurements.

if someone could get these measurements that would be awsome. i would explain why i need them but, i don't feel like writing anymore of a novel.

Jonboy · 05-01-2009, 08:30 AM

the shifter assembly bolts to the floor, and is connected by rods underneath. The shifter is not like the 203/205 stuff that bolts to the transfer case.

warpig98 · 05-04-2009, 07:52 PM

ok. would you by chance know the other questions that i asked

Jonboy · 05-05-2009, 08:42 AM

Nah. I haven't had a 4wd in 10 years. sorry.

Damien · 05-05-2009, 01:23 PM

You might want to ask this in the 4x4 section. You also need to state which NP transfer case you are using. ie NP203, NP205, NP208, NP241

88 Dippy · 05-05-2009, 04:13 PM

mine sticks out 7 1/2" and has a total movement of a bought 7 9/16"

my truck has a 700-R4 and NP208 T-case

if you want i can also get a messure of the plastic base

warpig98 · 05-05-2009, 07:10 PM

Quote:

Originally Posted by 88 Dippy

mine sticks out 7 1/2" and has a total movement of a bought 7 9/16"

my truck has a 700-R4 and NP208 T-case

if you want i can also get a messure of the plastic base

ya if you could do that, that would be awsome.

88 Dippy · 05-05-2009, 07:24 PM

will do. probly not till tomarrow though (truck is at my grandpa's)

04-30-2009, 09:52 PM	#1
warpig98 Registered User Join Date: Sep 2008 Location: arcadia, wisconsin Posts: 135	700R4 N' New Process transfer case??????? i need a measurement of how high the transfer case shifter comes up through the floor. and also the measurement of the distance it moves from all the way forward to back. would prefer exact measurements. if someone could get these measurements that would be awsome. i would explain why i need them but, i don't feel like writing anymore of a novel. __________________ THANK YOU SOLDIERS!!!!! VISIT MY 78 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=334884 Last edited by warpig98; 04-30-2009 at 09:53 PM.

05-01-2009, 08:30 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 700R4 N' New Process transfer case??????? the shifter assembly bolts to the floor, and is connected by rods underneath. The shifter is not like the 203/205 stuff that bolts to the transfer case.

05-04-2009, 07:52 PM	#3
warpig98 Registered User Join Date: Sep 2008 Location: arcadia, wisconsin Posts: 135	Re: 700R4 N' New Process transfer case??????? ok. would you by chance know the other questions that i asked __________________ THANK YOU SOLDIERS!!!!! VISIT MY 78 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=334884

05-05-2009, 08:42 AM	#4
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 700R4 N' New Process transfer case??????? Nah. I haven't had a 4wd in 10 years. sorry.

05-05-2009, 01:23 PM	#5
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: 700R4 N' New Process transfer case??????? You might want to ask this in the 4x4 section. You also need to state which NP transfer case you are using. ie NP203, NP205, NP208, NP241 __________________ I can still count my vehicles on two... wait three hands.

05-05-2009, 04:13 PM	#6
88 Dippy Registered User Join Date: Feb 2009 Location: mt. Pleasant, MI Posts: 246	Re: 700R4 N' New Process transfer case??????? mine sticks out 7 1/2" and has a total movement of a bought 7 9/16" my truck has a 700-R4 and NP208 T-case if you want i can also get a messure of the plastic base __________________ 1974 chevy Cheyenne C10 "The Mutt":4x4 convertion, NP208, 700-R4, stock 350, edelbrock Torker intake, edelbrock 600 CFM carb, duels 2001 Pontiac Grand Prix GT: 3.8L supercharged, 9.2:1 comprestion, ZZP XP cam, home made intake, 2 1/2" exhuast, 10psi of boost

05-05-2009, 07:24 PM	#8
88 Dippy Registered User Join Date: Feb 2009 Location: mt. Pleasant, MI Posts: 246	Re: 700R4 N' New Process transfer case??????? will do. probly not till tomarrow though (truck is at my grandpa's) __________________ 1974 chevy Cheyenne C10 "The Mutt":4x4 convertion, NP208, 700-R4, stock 350, edelbrock Torker intake, edelbrock 600 CFM carb, duels 2001 Pontiac Grand Prix GT: 3.8L supercharged, 9.2:1 comprestion, ZZP XP cam, home made intake, 2 1/2" exhuast, 10psi of boost



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.