I'm in dire need of some trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BruthaMan · 04-30-2009, 01:18 PM

Get your minds out of the gutter, boys

I've been watching for months on Ebay for some door panel trim for my 78 Silverado.

Here's my original door panels:

I have the center aluminum pieces, they were in pretty good condition. It's the trim that goes around the aluminum insert that I'm looking for, along with the door handle pull strap.

Anyone have a lead/source for these? Let me know if you have any spare trim (doh!)

Also looking for the bottom door carpets. Preferably gray, but more importantly that they are in good condition. I bought extra carpet with my carpet kit, so can recover them if needed.

bigarmzz · 04-30-2009, 04:38 PM

i know what ya mean man, i cant get enough "trim" either

jb4short · 04-30-2009, 05:24 PM

missing the trim myself....good luck; it was so much easier when I was a sailor

**71blksuper4x4** · 04-30-2009, 09:44 PM

Cheyenne Truck parts out of Oklahoma are the only ones that I know of that carry the 77-80 silverado trim. I have some on some old door panels, but they don't bolt up no more, the tabs are broke. Trevor

BruthaMan · 04-30-2009, 10:31 PM

Hey Trevor, thanks. Just purchased my dash bezel from Hank at Cheyenne Parts. I'll give them a call.

Tony@AirRideTech · 05-05-2009, 09:45 AM

Year One has quite a bit of trim selections too.... not sure if they have the silverado but its worth a look......

bigblock73 · 05-05-2009, 12:45 PM

I believe I have a set of trim you need, and in decent shape. The only problem, most of the studs are broken off...as typical with these door panel parts. You could easily epoxy the studs to the door panel on the back side...and never notice...unless you wanted to remove them for whatever reason.

I can take pics for you tonight when I get home.

BruthaMan · 05-05-2009, 04:11 PM

Hi Jeff,

That would be great, thanks!

Wade

bigblock73 · 05-05-2009, 09:22 PM

Wade, here are the pics. I tried to get good ones, but these don't photograph well at all. These are very nice, no chrome peeling at all, just broken studs on the back. Chrome is nice and bright.

What exactly is wrong with yours? I would hate to sell you these if they are in the same shape.

I was hanging on to these for a furure project....that may or may not even happen. If you can use them more than me, PM me an offer. I would rather have someone use them, than just sit on my shelf and collect dust.

BruthaMan · 05-05-2009, 09:31 PM

Hi Jeff,

Thanks, I appreciate your time in putting up the photos. Mine are in fairly good condition. The main thing I was really looking for, were the end caps and the center pull straps. As hard as these are to find, I figured I'd have to buy a full set (if I found some) to get those specific pieces, and would just use whichever trim pieces looked best from the sets.

Do you have those items as well?

bigblock73 · 05-05-2009, 09:38 PM

No, I do not have the end pieces...they all seem to break and fall off over time.

I DID have some that were intact but worn, but sold them with a bunch of other panel trim a few months ago.

BruthaMan · 05-05-2009, 09:46 PM

Thank you, Jeff. If I run across any extra caps/pulls, I'll let you know.

dammitmitchell · 05-06-2009, 08:11 PM

when i drive my truck around.... the trim comes to me..
but im married.... so i run them over! heehhe

04-30-2009, 01:18 PM	#1
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	I'm in dire need of some trim Get your minds out of the gutter, boys I've been watching for months on Ebay for some door panel trim for my 78 Silverado. Here's my original door panels: I have the center aluminum pieces, they were in pretty good condition. It's the trim that goes around the aluminum insert that I'm looking for, along with the door handle pull strap. Anyone have a lead/source for these? Let me know if you have any spare trim (doh!) Also looking for the bottom door carpets. Preferably gray, but more importantly that they are in good condition. I bought extra carpet with my carpet kit, so can recover them if needed. __________________ 1972 C10 Highlander - The making of a daily driver Last edited by BruthaMan; 04-30-2009 at 01:19 PM.

04-30-2009, 04:38 PM	#2
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	Re: I'm in dire need of some trim i know what ya mean man, i cant get enough "trim" either __________________ 1987 350 TBI lowered 5/7

04-30-2009, 05:24 PM	#3
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: I'm in dire need of some trim missing the trim myself....good luck; it was so much easier when I was a sailor

04-30-2009, 09:44 PM	#4
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,152	Re: I'm in dire need of some trim Cheyenne Truck parts out of Oklahoma are the only ones that I know of that carry the 77-80 silverado trim. I have some on some old door panels, but they don't bolt up no more, the tabs are broke. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-30-2009, 10:31 PM	#5
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: I'm in dire need of some trim Hey Trevor, thanks. Just purchased my dash bezel from Hank at Cheyenne Parts. I'll give them a call. __________________ 1972 C10 Highlander - The making of a daily driver

05-05-2009, 09:45 AM	#6
Tony@AirRideTech Junior Member Join Date: Feb 2005 Location: Huntingburg IN Posts: 620	Re: I'm in dire need of some trim Year One has quite a bit of trim selections too.... not sure if they have the silverado but its worth a look......

05-05-2009, 12:45 PM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: I'm in dire need of some trim I believe I have a set of trim you need, and in decent shape. The only problem, most of the studs are broken off...as typical with these door panel parts. You could easily epoxy the studs to the door panel on the back side...and never notice...unless you wanted to remove them for whatever reason. I can take pics for you tonight when I get home. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

05-05-2009, 04:11 PM	#8
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: I'm in dire need of some trim Hi Jeff, That would be great, thanks! Wade __________________ 1972 C10 Highlander - The making of a daily driver

05-05-2009, 09:22 PM	#9
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: I'm in dire need of some trim Wade, here are the pics. I tried to get good ones, but these don't photograph well at all. These are very nice, no chrome peeling at all, just broken studs on the back. Chrome is nice and bright. What exactly is wrong with yours? I would hate to sell you these if they are in the same shape. I was hanging on to these for a furure project....that may or may not even happen. If you can use them more than me, PM me an offer. I would rather have someone use them, than just sit on my shelf and collect dust. Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

05-05-2009, 09:31 PM	#10
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: I'm in dire need of some trim Hi Jeff, Thanks, I appreciate your time in putting up the photos. Mine are in fairly good condition. The main thing I was really looking for, were the end caps and the center pull straps. As hard as these are to find, I figured I'd have to buy a full set (if I found some) to get those specific pieces, and would just use whichever trim pieces looked best from the sets. Do you have those items as well? __________________ 1972 C10 Highlander - The making of a daily driver

05-05-2009, 09:38 PM	#11
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: I'm in dire need of some trim No, I do not have the end pieces...they all seem to break and fall off over time. I DID have some that were intact but worn, but sold them with a bunch of other panel trim a few months ago. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

05-05-2009, 09:46 PM	#12
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: I'm in dire need of some trim Thank you, Jeff. If I run across any extra caps/pulls, I'll let you know. __________________ 1972 C10 Highlander - The making of a daily driver

05-06-2009, 08:11 PM	#13
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: I'm in dire need of some trim when i drive my truck around.... the trim comes to me.. but im married.... so i run them over! heehhe __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.