I need a picture of a 62 transmission cross member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chucks1967 · 04-30-2009, 02:18 PM

my buddy and I have been looking everywhere for a reproduction cross member for a 62 c20 but have been unsuccessufl I guess unless someone on here has a better Idea we will be frabracating one. If some one would be so kinds as to post a pic of theirs so I can get and Idea of what the original looks like.

**slepysal** · 04-30-2009, 03:24 PM

not oe but try this link
http://persh.org/pickup/UnderTheHood.htm#Crossmember

chucks1967 · 04-30-2009, 03:37 PM

Quote:

Originally Posted by slepysal

not oe but try this link
http://persh.org/pickup/UnderTheHood.htm#Crossmember

Thanks, The link never siad exactly what year the frame/truck was. I believe 60-62 are the same but 63-66 are different. Thanks again..

Any one else can help out with some pics from 60-62 of the trans cross member I would sure appreciate it.

**slepysal** · 04-30-2009, 04:11 PM

Quote:

Originally Posted by chucks1967

Thanks, The link never siad exactly what year the frame/truck was. I believe 60-62 are the same but 63-66 are different. Thanks again..

Any one else can help out with some pics from 60-62 of the trans cross member I would sure appreciate it.

Yes you are correct the 60-62 frames ( torsion bar susp)Are the same 63-66 ( front coil susp) are the same The oe Trans cross member is rare, and when (if) you find one pricey
Good luck

chucks1967 · 05-01-2009, 11:11 AM

..gona bump this. I really need a good pic of an oe trans cross member. Thanks,

**slepysal** · 05-01-2009, 05:02 PM

Man I've looked all over , cant find a pic !!! Some one has to have one

padresag · 05-01-2009, 05:56 PM

there is a picture or illustration on one in the assy manual. I think that it may have been used only with a hydramatic application, which would have only been used in the GMC's and it fits into the x frame
what I don't know is whether or not that they used the p/glide in the chevs from 60-62 and if the did ; did they use a rear trans mount or was it bellhousing mounted? and that will answer that part of that question as if they rear mounted a cast iron p/glide then there would be a similiar crossmember
ron

if one needed a crossmember for there. it would not be difficult to fabricate , but I doubt that you would be able to buy a reay made one

**slepysal** · 05-01-2009, 06:26 PM

At one time I was bidding on one on ebay , it sold for 300.00!!

padresag · 05-01-2009, 06:30 PM

how far did you bid?
ron

**slepysal** · 05-01-2009, 07:19 PM

Quote:

Originally Posted by padresag

how far did you bid?
ron

I stoped at 125.00 , didnt need it. I was surprised to see it sell for so much. If I need one I'll fab one up

hewlett2002000 · 05-01-2009, 10:08 PM

well i have a 62 frame sitting in my shop that im fixing to get rid of one way or another. nobody seems to want it. it had a powerglide in it factory so i dont know if it would be the right one, but you can have the crossmember from it if it will help you. lemme know.
John

chucks1967 · 05-04-2009, 09:21 AM

Hey hewlett, I just sent you a PM.

chucks1967 · 05-11-2009, 09:31 AM

No one.... its hard to believe there are so few 62 guys on here..

1Bad62Pro/Street · 05-13-2009, 03:07 PM

Not much help.....but better than nothing.
Yes...... There are leaks every where!!!!!!!!.

04-30-2009, 02:18 PM	#1
chucks1967 Registered User Join Date: May 2008 Location: athens alabama Posts: 93	I need a picture of a 62 transmission cross member my buddy and I have been looking everywhere for a reproduction cross member for a 62 c20 but have been unsuccessufl I guess unless someone on here has a better Idea we will be frabracating one. If some one would be so kinds as to post a pic of theirs so I can get and Idea of what the original looks like.

04-30-2009, 03:24 PM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: I need a picture of a 62 transmission cross member not oe but try this link http://persh.org/pickup/UnderTheHood.htm#Crossmember __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

05-01-2009, 11:11 AM	#5
chucks1967 Registered User Join Date: May 2008 Location: athens alabama Posts: 93	Re: I need a picture of a 62 transmission cross member ..gona bump this. I really need a good pic of an oe trans cross member. Thanks,

05-01-2009, 05:02 PM	#6
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: I need a picture of a 62 transmission cross member Man I've looked all over , cant find a pic !!! Some one has to have one __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 05-01-2009 at 05:02 PM.

05-01-2009, 05:56 PM	#7
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: I need a picture of a 62 transmission cross member there is a picture or illustration on one in the assy manual. I think that it may have been used only with a hydramatic application, which would have only been used in the GMC's and it fits into the x frame what I don't know is whether or not that they used the p/glide in the chevs from 60-62 and if the did ; did they use a rear trans mount or was it bellhousing mounted? and that will answer that part of that question as if they rear mounted a cast iron p/glide then there would be a similiar crossmember ron if one needed a crossmember for there. it would not be difficult to fabricate , but I doubt that you would be able to buy a reay made one Last edited by padresag; 05-01-2009 at 05:58 PM.

05-01-2009, 06:26 PM	#8
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: I need a picture of a 62 transmission cross member At one time I was bidding on one on ebay , it sold for 300.00!! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

05-01-2009, 06:30 PM	#9
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: I need a picture of a 62 transmission cross member how far did you bid? ron

05-01-2009, 10:08 PM	#11
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: I need a picture of a 62 transmission cross member well i have a 62 frame sitting in my shop that im fixing to get rid of one way or another. nobody seems to want it. it had a powerglide in it factory so i dont know if it would be the right one, but you can have the crossmember from it if it will help you. lemme know. John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-04-2009, 09:21 AM	#12
chucks1967 Registered User Join Date: May 2008 Location: athens alabama Posts: 93	Re: I need a picture of a 62 transmission cross member Hey hewlett, I just sent you a PM.

05-11-2009, 09:31 AM	#13
chucks1967 Registered User Join Date: May 2008 Location: athens alabama Posts: 93	Re: I need a picture of a 62 transmission cross member No one.... its hard to believe there are so few 62 guys on here..

05-13-2009, 03:07 PM	#14
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: I need a picture of a 62 transmission cross member Not much help.....but better than nothing. Yes...... There are leaks every where!!!!!!!!. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.