Pro-Filer Cylinder Heads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Desert1957 · 05-13-2009, 05:45 PM

Hey,
I sure have heard of them, through my engine guy Bill Cannon at "Awesome Engines" in Delaware. I was all set to buy a set of "AFR" 227 heads until he told me about these, sure is tempting and at 1/2 the cost . I will let you know how they work out.
here is what they are going on...

PS: I'm not sure what you are putting these heads on but the only ones they make are way TOO Big for most small cubic inch street motors , check the intake port volume , there huge!

Desert

05-13-2009, 05:45 PM	#5
Desert1957 Registered User Join Date: Apr 2009 Location: New Freedom Pa. Posts: 1,335	Re: Pro-Filer Cylinder Heads Hey, I sure have heard of them, through my engine guy Bill Cannon at "Awesome Engines" in Delaware. I was all set to buy a set of "AFR" 227 heads until he told me about these, sure is tempting and at 1/2 the cost . I will let you know how they work out. here is what they are going on... PS: I'm not sure what you are putting these heads on but the only ones they make are way TOO Big for most small cubic inch street motors , check the intake port volume , there huge! Desert



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.