|
05-06-2009, 03:50 PM
|
#1 |
|
Registered User
Join Date: Feb 2007
Location: central, MS
Posts: 27
|
Changing Lugs on 72'
I want to put larger lugs on my 72' 4x4. I am putting 9/16" lugs, question is what size drill bit do i use to drill the rotors and hub? i drilled with 9/16 bit and still to small and 5/8 is to big? i thought someone may know qickly before i screw something up.
THanks for your help!!! |
|
|
|
05-06-2009, 11:39 PM
|
#2 |
|
Registered User
Join Date: Feb 2009
Location: arroyo grande, ca
Posts: 206
|
Re: Changing Lugs on 72'
I did this to mine because that was the size of the lug in the rear end I got (14 bolt sf) and wanted all the same...ended up taking to a machine shop. I couldn't find a lug that had the correct size knurl/length that would be easy so good job for them on a lathe.
__________________
James |
|
|
|
|
05-13-2009, 01:24 PM
|
#3 |
|
Registered User
Join Date: Feb 2008
Location: Albuquerque
Posts: 359
|
Re: Changing Lugs on 72'
Most 5/8 studs will require a 43/64ths drill bit.
Mick |
|
|
|
|
05-14-2009, 08:12 AM
|
#4 |
|
Registered User
Join Date: Feb 2007
Location: central, MS
Posts: 27
|
Re: Changing Lugs on 72'
I went with a 9/16 lug and i think it took a 19/32 drill bit for the hub and one slightly larger for the rotor and it worked good. But for sure they were two different sizes!!! Thanks for the information.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
