05-15-2009, 03:48 AM | #1 |
PIMPING RIDES
Join Date: Sep 2004
Location: SPRING,TEXAS
Posts: 296
|
Height question
what set up do i need on front and back to get this stance ,i assume it can be done with drop coil springs in front and back .what else do i need
__________________
1964 CHEVY 1/2 C/10 FLEET 1981 CHEVY 1/2 C/10 FLEET 1995 DODGE 1500 V6 FLEET EAST http://www.flickr.com/photos/bigasspimp/?saved=1 |
05-15-2009, 11:49 AM | #2 |
PIMPING RIDES
Join Date: Sep 2004
Location: SPRING,TEXAS
Posts: 296
|
Re: Height question
Yyyy
__________________
1964 CHEVY 1/2 C/10 FLEET 1981 CHEVY 1/2 C/10 FLEET 1995 DODGE 1500 V6 FLEET EAST http://www.flickr.com/photos/bigasspimp/?saved=1 |
05-15-2009, 12:12 PM | #3 |
Registered User
Join Date: Sep 2008
Location: Trabuco Canyon, CA
Posts: 173
|
Re: Height question
Do you know what size rims those are? It looks like a 2/4 spring drop to me with 17" rims....
__________________
1964 Chevy C10 a.k.a. Julie Ann H.E.I. cause its better to be pointless |
05-15-2009, 01:00 PM | #4 |
Registered User
Join Date: Mar 2004
Location: Corinth,TX
Posts: 444
|
Re: Height question
I used drop spindles 2" and a 1" drop springs in order to get that look on the front of mine....I have not done the back end yet...kinda like the rake that it has right now...
Last edited by dallas71; 05-15-2009 at 01:01 PM. |
05-15-2009, 01:19 PM | #5 |
Registered User
Join Date: Sep 2008
Location: Trabuco Canyon, CA
Posts: 173
|
Re: Height question
Very nice! That is the same stance I have, and my favorite for long fleets, only the previous owner decided to cut 3" out of the front springs instead of using drop springs makes for a bumpy ride...
__________________
1964 Chevy C10 a.k.a. Julie Ann H.E.I. cause its better to be pointless Last edited by BMSJaX; 05-15-2009 at 01:20 PM. |
05-15-2009, 02:09 PM | #6 |
Registered User
Join Date: Mar 2004
Location: Corinth,TX
Posts: 444
|
Re: Height question
lets try the picture again.
Last edited by dallas71; 05-15-2009 at 02:10 PM. |
05-15-2009, 04:08 PM | #7 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,619
|
Re: Height question
From the emblems on the side it looks like a 62 and if that is the case it has torsion bars up front. With mine I got 2.5 inch drop spindles for the front and lowered it the rest of the way by loosening the torsion bars.
|
05-15-2009, 08:40 PM | #8 |
PIMPING RIDES
Join Date: Sep 2004
Location: SPRING,TEXAS
Posts: 296
|
Re: Height question
i dont know what size rims but i have a 64 short fleet and i want it to be even drop .so do i need drop springs for front and back and may drop shocks ? or do i have to have drop spindles too .it already has 5 lug front and rear
__________________
1964 CHEVY 1/2 C/10 FLEET 1981 CHEVY 1/2 C/10 FLEET 1995 DODGE 1500 V6 FLEET EAST http://www.flickr.com/photos/bigasspimp/?saved=1 |
05-15-2009, 11:16 PM | #9 |
SIR
Join Date: Apr 2005
Location: grants pass oregon,usa
Posts: 658
|
Re: Height question
this is a 2-1/2 drop spindle with a 1" drop spring the back is 4"drop springs...
__________________
66long low fleet http://community.webshots.com/user/LVNR66 |
05-16-2009, 01:39 AM | #10 |
Resistance is Futile
Join Date: Dec 2006
Location: Mesa,Arizona
Posts: 3,520
|
Re: Height question
The 62 you have pictured is wearing 20's... the tire in front is either a 45 or 40 series profile (guess) so its 28 or 29'' in diameter. I would guess from my trucks that its at least 4'' drop in front.
__________________
64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device |
Bookmarks |
|
|