Motor Mount Bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cory321 · 05-13-2009, 10:02 PM

What is the size and length of the bolt that secures the mount to the stand.Mine had washers and they were too long. I would like to replace it with the correct ones.
Cory

Wrenchbender Ret · 05-14-2009, 03:54 PM

I believe they are 1 in. They have a thick flat washer & lock washer. I always cut the hole on the stand larger. It can save a lot of hastle getting the bolts started.

cory321 · 05-15-2009, 04:04 PM

Thank you are they 3/8 also

**john** · 05-15-2009, 04:32 PM

I think the mount to tower bolt is 7/16 N.C. I have heard of some of the aftermarket ones from overseas have metric threads, so check what you buy.

cdowns · 05-15-2009, 05:11 PM

cant you just measure it and get a shorter one?

cory321 · 05-17-2009, 10:18 AM

Quote:

Originally Posted by john

I think the mount to tower bolt is 7/16 N.C. I have heard of some of the aftermarket ones from overseas have metric threads, so check what you buy.

Thank you

05-13-2009, 10:02 PM	#1
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Motor Mount Bolts What is the size and length of the bolt that secures the mount to the stand.Mine had washers and they were too long. I would like to replace it with the correct ones. Cory __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

05-14-2009, 03:54 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,208	Re: Motor Mount Bolts I believe they are 1 in. They have a thick flat washer & lock washer. I always cut the hole on the stand larger. It can save a lot of hastle getting the bolts started.

05-15-2009, 04:04 PM	#3
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: Motor Mount Bolts Thank you are they 3/8 also __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

05-15-2009, 04:32 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Motor Mount Bolts I think the mount to tower bolt is 7/16 N.C. I have heard of some of the aftermarket ones from overseas have metric threads, so check what you buy. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

05-15-2009, 05:11 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Motor Mount Bolts cant you just measure it and get a shorter one? __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.