|
05-17-2009, 11:37 AM
|
#1 |
|
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Socket size for HO52
Anybody know what size the socket is for removing the nut when removing the hub/drum from an Eaton HO52?
__________________
Beat it to fit, Paint it to match... 
Last edited by Sinister; 05-17-2009 at 11:37 AM. |
|
|
|
05-17-2009, 01:02 PM
|
#2 |
|
Registered User
 
Join Date: Nov 2007
Location: Turlock California 95380
Posts: 2,075
|
Re: Socket size for HO52
Not sure about the ho52. My dana60 nut is 2 3/8" IIRC. I guess to find out for sure pull the axle and measure the nut.
__________________
72 C20 Longbed 05 1500 Z71 |
|
|
|
|
05-17-2009, 02:18 PM
|
#3 |
|
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: Socket size for HO52
Well, I was going out to the scrapyard and wanted to have the socket before hand, but all they had was Dana 60's on the C-20's.
__________________
Beat it to fit, Paint it to match...
Last edited by Sinister; 05-17-2009 at 02:19 PM. |
|
|
|
|
05-17-2009, 02:19 PM
|
#4 |
|
Registered User
Join Date: Nov 2007
Location: Turlock California 95380
Posts: 2,075
|
Re: Socket size for HO52
this is what I borrowed from a friend to do mine. Its this or he said use a brass punch & hammer to loosen it out. I dont like the idea of banging the nut loose and tightening it back up with a punch. Hope this helps.
Maybe someone here knows if they have the same size nut ? http://www.napaonline.com/NOLPPSE/(S...434_0006402220
__________________
72 C20 Longbed 05 1500 Z71 Last edited by sleepertruck72; 05-17-2009 at 02:19 PM. |
|
|
|
|
05-17-2009, 06:08 PM
|
#5 |
|
Registered User
Join Date: Nov 2008
Location: Carmel, IN
Posts: 187
|
Re: Socket size for HO52
They aren't very tight, for a junkyard salvage, hammer and punch is fine, I would get the socket to put them back on.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
