Best DOM supplier in houston Texas

[ShowSS12]

I am looking to build a new pan hard bar, and some 4 link bars, dose anyone know where is the best place to get 1.5 .25 wall DOM tubing in houston texas? Steel Supply wants $30 a foot

[69lemans]

$16 a foot at onlinemetals.com,but shipping would prolly kill you


http://www.onlinemetals.com/merchant...83&top_cat=197

[ShowSS12]

Thats not a bad price but I can get it for about $8.00 from low rider depot, I was just hoping to find some where local.

[1956cameo]

Have you tried Triple S steel. They have two Houston area locations with one on the north side and one on the south side by Hobby airport. It is on the road that runs along the air port just east of the airport between hobby and I-45. There is also a steel place you can try on telephone road (Hwy 35) just south of Hobby airport, north of the beltway. Sorry don't know the name of it but it is on the left when going northbound from the beltway. Just a couple of places to try that are local.

[ap2002]

triple steel is on Monroe by hobby airport...

[ShowSS12]

Originally Posted by 1956cameo

There is also a steel place you can try on telephone road (Hwy 35) just south of Hobby airport, north of the beltway. Sorry don't know the name of it but it is on the left when going northbound from the beltway. Just a couple of places to try that are local.

Ya that is steel supply..... I called tripple S steel they don't carry 1.5 1/4 wall DOM. I am gonna try to look for 1 1/4 .120 wall DOM.

[1956cameo]

Sorry. Those are the only places that I know of. Good luck finding it.

[cdowns]

have you checked speedway motors? they sell cut to fit bars for making 4links and panhard bars