Time to clean out, cheap stuff in DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clay68c10** · 05-19-2009, 10:46 PM

So... We're moving to Colorado and I need to clean out some stuff in my garage. All of this is for local pickup only and I'm asking for like $50ish for all of it. The only thing is, you need to take it all... Sorry no pics.
This is all used in ok condition unless other wise noted.
Please NO PM'S
68 upper & lower control arms
front springs
BBC starter, good core, it would heat soak in the summer
internally regulated alternator, works fine
HEI parts,
TH400 steel pan
1 rams horn SBC manifold
Cargo light w/wiring
Halogen headlights
Panhard bar
307/283/327 (short wp) crank pulley and alt bracket
assorted turn signal & tail light lenses
89 booster
73-87 booster/master-used
And I'm sure there's some other odds & ends

I'll be around this weekend

**Hart_Rod** · 05-19-2009, 10:48 PM

What shape is the cargo light in?

**clay68c10** · 05-19-2009, 11:02 PM

Decent, some pitting but ok for a driver for sure.

smith2481 · 05-20-2009, 06:54 AM

how much for the panhard bar?

my67chevytruck · 05-20-2009, 07:30 AM

Per Clay....

[QUOTE=clay68c10;3318477] All of this is for local pickup only and I'm asking for like $50ish for all of it. The only thing is, you need to take it all... Sorry no pics.

**clay68c10** · 05-20-2009, 09:13 AM

Thanks my67

I will take offers on this stuff. I really just don't want to move it again.

**michael bustamante** · 05-20-2009, 10:58 AM

boy if only i were going to dfw. if you come thru Albuquerque, Ill take that stuff off your hands

Tx Firefighter · 05-20-2009, 11:19 AM

I could sure use a passenger side ramshorn manifold. Which side do you have there ?

**clay68c10** · 05-20-2009, 03:33 PM

I'll have to check when I get home.

**clay68c10** · 05-20-2009, 10:28 PM

It says RH, so you're in luck.

Tx Firefighter · 05-21-2009, 07:35 AM

I will give you the 50 for the stuff. Is there any way you could drop it by my station on Sunday ?

68laydout · 05-21-2009, 11:37 AM

Dang I need those control arms. let me know if it falls through. I will give $25for the arms. Thanks.

Tx Firefighter · 05-21-2009, 11:56 AM

Clay, do whatever you want. I just want the exhaust manifold and offered to buy the whole deal since that's what you priced it as. I'm happy to buy just the manifold and you can sell the arms to laydout. Whatever works best.

**clay68c10** · 05-21-2009, 11:06 PM

Tell ya what, I got all this stuff for cheap so I'm trying to make it go cheap.
Kevin, how's $20 sound? I can drop it off Sunday.
68laydout I'll go $20 for you too, you can come by or meet me at my work near Love Field.
Anyone want the rest, come get it and I might just give it away.

Any questions; 817-602-9324

Tx Firefighter · 05-22-2009, 07:12 AM

20 is fine for the manifold. I'd also like to buy the :

BBC starter
internally regulated alternator
HEI parts
Cargo light w/wiring
Halogen headlights
307/283/327 (short wp) crank pulley and alt bracket
other odds & ends

Bring whatever else, I will buy the parts, and whatever I dont want, I will throw in the dumpster there at work. That way I get my manifold and other goodies, the other guy gets his control arms and you get your asking price and rid of all the parts.

**clay68c10** · 05-22-2009, 08:43 PM

Sounds good to me. What time sunday is best for you?

Hey, I forgot I also have a 68 PS box I was going to give to Kelly (grayghost) but he doesn't need it now. You want that too??

Tx Firefighter · 05-22-2009, 09:28 PM

I work 24 hour shifts. I will be there from 5 AM Sunday morning until 7 AM Monday morning. Any time is good with me.

I will PM you my cell number.

Bring whatever you want to be rid of. I never turn down spare parts.

blazerbrian72 · 05-22-2009, 09:34 PM

[QUOTE=clay68c10;3318477]So... We're moving to Colorado and I need to

what part of CO are you going to?

**clay68c10** · 05-22-2009, 10:01 PM

Denver area. We're originally from Wyoming.
Grand junction is a nice area, my wife loves it but no jobs for us.

blazerbrian72 · 05-22-2009, 11:07 PM

Quote:

Originally Posted by clay68c10

Denver area. We're originally from Wyoming.
Grand junction is a nice area, my wife loves it but no jobs for us.

well im out in 30 min NE of dallas right now.I was working out in GJ for the oil and gas. The gov just past new rules on drilling and it slowed down and im layed off

I have a buddy that just moved down here and in trying to get a job off shore

**clay68c10** · 05-24-2009, 06:43 PM

Still have the control arms, Kevin took the rest.

I'm waiting to hear back from 68laydout. I'll give him a week (till the 28th) to respond.

68laydout · 05-26-2009, 10:26 AM

Quote:

Originally Posted by clay68c10

Still have the control arms, Kevin took the rest.

I'm waiting to hear back from 68laydout. I'll give him a week (till the 28th) to respond.

Pm'd you. I will call to arrange something. Appreciate it!

**clay68c10** · 05-26-2009, 05:04 PM

PM back at ya.

05-19-2009, 10:46 PM	#1
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Time to clean out, cheap stuff in DFW So... We're moving to Colorado and I need to clean out some stuff in my garage. All of this is for local pickup only and I'm asking for like $50ish for all of it. The only thing is, you need to take it all... Sorry no pics. This is all used in ok condition unless other wise noted. Please NO PM'S 68 upper & lower control arms front springs BBC starter, good core, it would heat soak in the summer internally regulated alternator, works fine HEI parts, TH400 steel pan 1 rams horn SBC manifold Cargo light w/wiring Halogen headlights Panhard bar 307/283/327 (short wp) crank pulley and alt bracket assorted turn signal & tail light lenses 89 booster 73-87 booster/master-used And I'm sure there's some other odds & ends I'll be around this weekend __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 05-19-2009 at 10:47 PM.

05-19-2009, 10:48 PM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,865	Re: Time to clean out, cheap stuff in DFW What shape is the cargo light in? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 05-19-2009 at 10:48 PM.

05-19-2009, 11:02 PM	#3
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW Decent, some pitting but ok for a driver for sure. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-20-2009, 06:54 AM	#4
smith2481 Registered User Join Date: May 2008 Location: Millwood, WV Posts: 119	Re: Time to clean out, cheap stuff in DFW how much for the panhard bar?

05-20-2009, 07:30 AM	#5
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Time to clean out, cheap stuff in DFW Per Clay.... [QUOTE=clay68c10;3318477] All of this is for local pickup only and I'm asking for like $50ish for all of it. The only thing is, you need to take it all... Sorry no pics. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 05-20-2009 at 07:31 AM.

05-20-2009, 09:13 AM	#6
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW Thanks my67 I will take offers on this stuff. I really just don't want to move it again. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-20-2009, 10:58 AM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,878	Re: Time to clean out, cheap stuff in DFW boy if only i were going to dfw. if you come thru Albuquerque, Ill take that stuff off your hands __________________ 1967custom Last edited by michael bustamante; 05-20-2009 at 10:58 AM.

05-20-2009, 11:19 AM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Time to clean out, cheap stuff in DFW I could sure use a passenger side ramshorn manifold. Which side do you have there ? __________________ I'm on the Instagram- @Gearhead_Kevin

05-20-2009, 03:33 PM	#9
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW I'll have to check when I get home. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-20-2009, 10:28 PM	#10
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW It says RH, so you're in luck. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-21-2009, 07:35 AM	#11
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Time to clean out, cheap stuff in DFW I will give you the 50 for the stuff. Is there any way you could drop it by my station on Sunday ? __________________ I'm on the Instagram- @Gearhead_Kevin

05-21-2009, 11:37 AM	#12
68laydout Junior Member Join Date: Jun 2006 Location: Frisco Tx Posts: 311	Re: Time to clean out, cheap stuff in DFW Dang I need those control arms. let me know if it falls through. I will give $25for the arms. Thanks.

05-21-2009, 11:56 AM	#13
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Time to clean out, cheap stuff in DFW Clay, do whatever you want. I just want the exhaust manifold and offered to buy the whole deal since that's what you priced it as. I'm happy to buy just the manifold and you can sell the arms to laydout. Whatever works best. __________________ I'm on the Instagram- @Gearhead_Kevin

05-21-2009, 11:06 PM	#14
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW Tell ya what, I got all this stuff for cheap so I'm trying to make it go cheap. Kevin, how's $20 sound? I can drop it off Sunday. 68laydout I'll go $20 for you too, you can come by or meet me at my work near Love Field. Anyone want the rest, come get it and I might just give it away. Any questions; 817-602-9324 __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-22-2009, 07:12 AM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Time to clean out, cheap stuff in DFW 20 is fine for the manifold. I'd also like to buy the : BBC starter internally regulated alternator HEI parts Cargo light w/wiring Halogen headlights 307/283/327 (short wp) crank pulley and alt bracket other odds & ends Bring whatever else, I will buy the parts, and whatever I dont want, I will throw in the dumpster there at work. That way I get my manifold and other goodies, the other guy gets his control arms and you get your asking price and rid of all the parts. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

05-22-2009, 08:43 PM	#16
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW Sounds good to me. What time sunday is best for you? Hey, I forgot I also have a 68 PS box I was going to give to Kelly (grayghost) but he doesn't need it now. You want that too?? __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 05-22-2009 at 08:47 PM.

05-22-2009, 09:28 PM	#17
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Time to clean out, cheap stuff in DFW I work 24 hour shifts. I will be there from 5 AM Sunday morning until 7 AM Monday morning. Any time is good with me. I will PM you my cell number. Bring whatever you want to be rid of. I never turn down spare parts. __________________ I'm on the Instagram- @Gearhead_Kevin

05-22-2009, 09:34 PM	#18
blazerbrian72 Registered User Join Date: Feb 2009 Location: Colorado and PA Posts: 108	Re: Time to clean out, cheap stuff in DFW [QUOTE=clay68c10;3318477]So... We're moving to Colorado and I need to what part of CO are you going to?

05-22-2009, 10:01 PM	#19
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW Denver area. We're originally from Wyoming. Grand junction is a nice area, my wife loves it but no jobs for us. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 05-22-2009 at 10:02 PM.

05-24-2009, 06:43 PM	#21
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW Still have the control arms, Kevin took the rest. I'm waiting to hear back from 68laydout. I'll give him a week (till the 28th) to respond. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-26-2009, 05:04 PM	#23
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Time to clean out, cheap stuff in DFW PM back at ya. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

Register or Log In To remove these advertisements.