what's the best place to get a front disc conversion from? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wahlie · 05-28-2009, 04:15 PM

Ok, I've decided to move forward with the front disc conversion on my 67 c10 1/2 ton. I've done some homework and have found a few places online. Prices range from 500-1300.00 I'm thinking that i'll do the entire front suspension while i'm in there as well. Does anyone have any place that they would recommend for a front disc conversion? I know that ECE has them but they are a bit pricey..

thanks,
Chris

my67chevytruck · 05-28-2009, 04:37 PM

depends if your truck is complete with the motor still installed etc. alot of people install 71 -72 complete front crossmembers and rear ends, and you could even use 73-87 chevy truck front, and rear (need to modify spring perches for coil rearend.

BossHogg69 · 05-28-2009, 05:02 PM

the big question is how much do you want to spend, and do you want new parts, or do you want to hit the boneyard/auto recycler?

wahlie · 05-28-2009, 05:10 PM

I'M thinking that I will probably go new... I'm going to be replacing the entire front suspension with all new components so might as well go all the way. I don't want to break the bank though. I've seen some kits for 1200 or 1400..

thanks,
Chris

wahlie · 05-28-2009, 05:11 PM

I also meant to say that I'd ideally like the booster on here as well... I know that they have 11" ones for the 67.

Tx Firefighter · 05-28-2009, 05:21 PM

I actually enjoy the challenge of doing things the hard way, so I use a late model donor and rebuild that from local parts store sources.

On my current truck, I got a 100 dollar late model front end off of Craigslist and added new ball joints, bushings, tie rod ends, calipers, pads, etc from the local parts store and Summit.

It was more work, but the final product is much nicer than a kit and the savings are significant.

Beatcoaster · 05-28-2009, 05:27 PM

I'm personally looking at the ones from CPP, they now have spindles that don't mess with the spacing of the wheel in relation to the inner fender, which is great. I like that their kits come quite complete and they can sell new ball joints, arms, or whatever else you might need.

bigguy69 · 05-28-2009, 07:21 PM

i just installed one of those kits on a 70 chevy truck. the only problem i had was with the calipers they sent me. they leaked around the banjo bolt. iwas having problems with there customer service and ended up buying autozone calipers. I also ended up putting spacers on the front because the front wheels scrubbed. the kit itself was a good kit. as soon as iget the camera working i will post some pics.

67slammer · 05-28-2009, 07:33 PM

i used the cpp kit on my 67 with no problems, i bought the 4 wheel disc brake kit for $1200.00 well worth the money. good luck with your conversion. mike

05-28-2009, 04:15 PM	#1
wahlie Registered User Join Date: Apr 2009 Location: milford,ct Posts: 95	what's the best place to get a front disc conversion from? Ok, I've decided to move forward with the front disc conversion on my 67 c10 1/2 ton. I've done some homework and have found a few places online. Prices range from 500-1300.00 I'm thinking that i'll do the entire front suspension while i'm in there as well. Does anyone have any place that they would recommend for a front disc conversion? I know that ECE has them but they are a bit pricey.. thanks, Chris

05-28-2009, 04:37 PM	#2
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: what's the best place to get a front disc conversion from? depends if your truck is complete with the motor still installed etc. alot of people install 71 -72 complete front crossmembers and rear ends, and you could even use 73-87 chevy truck front, and rear (need to modify spring perches for coil rearend. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

05-28-2009, 05:02 PM	#3
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: what's the best place to get a front disc conversion from? the big question is how much do you want to spend, and do you want new parts, or do you want to hit the boneyard/auto recycler? __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

05-28-2009, 05:10 PM	#4
wahlie Registered User Join Date: Apr 2009 Location: milford,ct Posts: 95	Re: what's the best place to get a front disc conversion from? I'M thinking that I will probably go new... I'm going to be replacing the entire front suspension with all new components so might as well go all the way. I don't want to break the bank though. I've seen some kits for 1200 or 1400.. thanks, Chris

05-28-2009, 05:11 PM	#5
wahlie Registered User Join Date: Apr 2009 Location: milford,ct Posts: 95	Re: what's the best place to get a front disc conversion from? I also meant to say that I'd ideally like the booster on here as well... I know that they have 11" ones for the 67. Last edited by wahlie; 05-28-2009 at 05:13 PM.

05-28-2009, 05:21 PM	#6
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: what's the best place to get a front disc conversion from? I actually enjoy the challenge of doing things the hard way, so I use a late model donor and rebuild that from local parts store sources. On my current truck, I got a 100 dollar late model front end off of Craigslist and added new ball joints, bushings, tie rod ends, calipers, pads, etc from the local parts store and Summit. It was more work, but the final product is much nicer than a kit and the savings are significant. __________________ I'm on the Instagram- @Gearhead_Kevin

05-28-2009, 05:27 PM	#7
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Re: what's the best place to get a front disc conversion from? I'm personally looking at the ones from CPP, they now have spindles that don't mess with the spacing of the wheel in relation to the inner fender, which is great. I like that their kits come quite complete and they can sell new ball joints, arms, or whatever else you might need.

05-28-2009, 07:21 PM	#8
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: what's the best place to get a front disc conversion from? i just installed one of those kits on a 70 chevy truck. the only problem i had was with the calipers they sent me. they leaked around the banjo bolt. iwas having problems with there customer service and ended up buying autozone calipers. I also ended up putting spacers on the front because the front wheels scrubbed. the kit itself was a good kit. as soon as iget the camera working i will post some pics. __________________ members met: redbaron69, billsbowtie,nc67

05-28-2009, 07:33 PM	#9
67slammer Registered User Join Date: Jan 2008 Location: muncy pa Posts: 425	Re: what's the best place to get a front disc conversion from? i used the cpp kit on my 67 with no problems, i bought the 4 wheel disc brake kit for $1200.00 well worth the money. good luck with your conversion. mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.