The 283 Rebuild Begins - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MacAttack · 06-03-2009, 10:17 AM

After work - went to the Pipe Dude's place, because he hadn't called - to see if he'd actually got anything done on the exhaust system. (Again, he's using my mufflers and resonators.)

When I got there the C10 was actually up in the air and everything tacked into place. I'd given him the option of going 90 degrees out from the frame, just in front of the rear wheels - or at an angle, and he went with the latter.

Unfortunately, his wire feed died on his welder and that unit was torn apart, spread all over the floor.

OH, THE HUMANITY!

06-03-2009, 10:17 AM	#10
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: The 283 Rebuild Begins After work - went to the Pipe Dude's place, because he hadn't called - to see if he'd actually got anything done on the exhaust system. (Again, he's using my mufflers and resonators.) When I got there the C10 was actually up in the air and everything tacked into place. I'd given him the option of going 90 degrees out from the frame, just in front of the rear wheels - or at an angle, and he went with the latter. Unfortunately, his wire feed died on his welder and that unit was torn apart, spread all over the floor. OH, THE HUMANITY! __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.