Longbed Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 06-01-2009, 09:41 PM

I bought the truck this bed was on mainly for the bed,when I had three 3/4t 4wds,and now don`t need it.I was going to take it apart to get parts I needed,like cross members,but decided I have most parts i need and this would be a great bed to put on a truck.You know how it goes,something is great until you pull it apart.Then,it all looks like crap.The flanges on the fender may have rust,but that doesn`t matter when it`s all together.The cross members may be scaley,but they`ll do just fine for quite awhile.When restoring,none of this is "good enough".But,take and paint this and it`ll be a great bed for quite awhile.It`s origina lpaint as well as wood floor.The steps have rust and there`s some in the top rail.The tailgate`s great and so is the front panel,as well as the rear cross sill.The whole thing is very straight and not beat up at all.Only the driver fender has some rust at the lower front...very fixable.I even have some new take-off steps I can offer as well as another short bedside that pieces can be cut from if the bed is restored.
I want $300 for the bed.$100 for the steps and $100 for the short bedside.I`m not offering anything seperate.I`m offering the bed and if the buyer wants the other stuff,it`s available.If only the bed sells,then the other parts will be available.If it`s all wanted in a package I`ll do $400.

Two cross members were weak and need replaced.I have more pictures and can get any you`d like if interested.

**special-K** · 06-02-2009, 10:02 PM

It could be made into a shortbed pretty easy.That`s what I was going to do.But,I found a shortbed.

**CPNE** · 06-02-2009, 10:12 PM

Hmmm....still lookimg fo a fleetside 67-68 gmc tailgate? Going to August Carlisle?

**special-K** · 06-03-2009, 07:18 AM

Yes and yes.

**CPNE** · 06-03-2009, 08:36 AM

Okay, let me see how this pans out for me, I may be willing to trade if you are. In the mean time if you can get cold hard $$$ for it, by all means sell it since I'm up in the air at this moment as to what direction I may go.

BLAZERMAN · 06-03-2009, 10:00 PM

Same old story! sure wish you were closer, it would be in my back yard by now.

**special-K** · 06-04-2009, 08:38 AM

The pluses and minuses of the www.

**CPNE** · 06-04-2009, 10:30 AM

Tim

If you can get this to August Carlisle, I'll take it for $300 regardless of my decision on the tailgate situation. Let me verify with my sn that he's willing to haul a trailer down to meet you.

Jeff

**CPNE** · 06-05-2009, 09:38 AM

Tim, looks like Brian can pick it up at Aug carlisle, you still selling?

**special-K** · 06-05-2009, 10:09 AM

Yeah Jeff,This all sounds fine with me.It`s good to know.I`ve been tossing back and forth about this thing long enough.I was even considering using it on the tow truck chassis.

JimmyFloyd · 06-05-2009, 10:12 AM

Where is Buffalo Bottom? I'm looking into a 72 Long bed step side and may need a new bed.

**special-K** · 06-05-2009, 01:06 PM

I`m in a valley along Buffalo Road outside of Mt.Airy in Central Maryland.I just call my place Buffalo Bottom to be an ass.
It looks like I have a deal with CPNE on this bed,though.

06-01-2009, 09:41 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Longbed Stepside I bought the truck this bed was on mainly for the bed,when I had three 3/4t 4wds,and now don`t need it.I was going to take it apart to get parts I needed,like cross members,but decided I have most parts i need and this would be a great bed to put on a truck.You know how it goes,something is great until you pull it apart.Then,it all looks like crap.The flanges on the fender may have rust,but that doesn`t matter when it`s all together.The cross members may be scaley,but they`ll do just fine for quite awhile.When restoring,none of this is "good enough".But,take and paint this and it`ll be a great bed for quite awhile.It`s origina lpaint as well as wood floor.The steps have rust and there`s some in the top rail.The tailgate`s great and so is the front panel,as well as the rear cross sill.The whole thing is very straight and not beat up at all.Only the driver fender has some rust at the lower front...very fixable.I even have some new take-off steps I can offer as well as another short bedside that pieces can be cut from if the bed is restored. I want $300 for the bed.$100 for the steps and $100 for the short bedside.I`m not offering anything seperate.I`m offering the bed and if the buyer wants the other stuff,it`s available.If only the bed sells,then the other parts will be available.If it`s all wanted in a package I`ll do $400. Two cross members were weak and need replaced.I have more pictures and can get any you`d like if interested. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-02-2009, 10:02 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Longbed Stepside It could be made into a shortbed pretty easy.That`s what I was going to do.But,I found a shortbed. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-02-2009, 10:12 PM	#3
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Longbed Stepside Hmmm....still lookimg fo a fleetside 67-68 gmc tailgate? Going to August Carlisle? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

06-03-2009, 07:18 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Longbed Stepside Yes and yes. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-03-2009, 08:36 AM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Longbed Stepside Okay, let me see how this pans out for me, I may be willing to trade if you are. In the mean time if you can get cold hard $$$ for it, by all means sell it since I'm up in the air at this moment as to what direction I may go. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

06-03-2009, 10:00 PM	#6
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: Longbed Stepside Same old story! sure wish you were closer, it would be in my back yard by now. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

06-04-2009, 08:38 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Longbed Stepside The pluses and minuses of the www. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-04-2009, 10:30 AM	#8
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Longbed Stepside Tim If you can get this to August Carlisle, I'll take it for $300 regardless of my decision on the tailgate situation. Let me verify with my sn that he's willing to haul a trailer down to meet you. Jeff __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

06-05-2009, 09:38 AM	#9
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Longbed Stepside Tim, looks like Brian can pick it up at Aug carlisle, you still selling? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

06-05-2009, 10:09 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Longbed Stepside Yeah Jeff,This all sounds fine with me.It`s good to know.I`ve been tossing back and forth about this thing long enough.I was even considering using it on the tow truck chassis. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-05-2009, 10:12 AM	#11
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Longbed Stepside Where is Buffalo Bottom? I'm looking into a 72 Long bed step side and may need a new bed. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

06-05-2009, 01:06 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Longbed Stepside I`m in a valley along Buffalo Road outside of Mt.Airy in Central Maryland.I just call my place Buffalo Bottom to be an ass. It looks like I have a deal with CPNE on this bed,though. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.