Looking for windshield frame cap/cover.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OldCreek · 06-02-2009, 01:14 PM

Looking for this part:
(hope u don't mind me using ur pic)
(I checked some of the bigger websites but no luck)

RLONG · 06-02-2009, 01:28 PM

Check LMC or Classic truck

OldCreek · 06-02-2009, 01:36 PM

Already did...
I've checked LMC, Classic Parts/Chevy Duty, Classic Industries, Brothers, Jim Carters...

These are not the "Drip Rail Deflectors" from what I can tell.

OldCreek · 06-02-2009, 01:43 PM

Could these from GMC Pauls be the one? No pics on their website...

"69-72 Blazer Windshield Corner Water Deflectors " "Fits at top corner of windshield on either side where the vent window, removable top and windshield pillar come together. Factory type metal insert gives excellent fit every time."

RED72blazer · 06-02-2009, 01:59 PM

aren't those "caps" part of the door weather stripping? Check page 15 of the lmc catalog. Part number 10.

**lks dcvn** · 06-02-2009, 02:00 PM

yes they are part of the weatherstripping...

RLONG · 06-02-2009, 02:06 PM

Page 15 LMC item 3 is both deflectors that is what is in your picture.

**OleSenna** · 06-02-2009, 06:47 PM

I think what OldCreek is looking for is not the deflectors, as shown in Item 3, page 15, of the LMC catalog.

Instead, lks dcvn has it right. The caps are part of the driver and passenger door weatherstripping, as shown by Item 10 on the same page.

Name: LMC Pg 15.jpg
Views: 549
Size: 43.2 KB

Name: LMC Pg 15.jpg
Views: 549
Size: 43.2 KB

It just so happens that I received a pair of these today, which were ordered from Manes Parts in Odessa, MO. The triangular caps are an integral part of the rubber stripping, one for each door.

OldCreek · 06-02-2009, 07:16 PM

Ok. Do these have a metal insert or just the rubber seal?

**OleSenna** · 06-02-2009, 10:14 PM

Quote:

Originally Posted by OldCreek

Ok. Do these have a metal insert or just the rubber seal?

Just the rubber seal.

Blazer1970 · 06-03-2009, 05:59 AM

Quote:

Originally Posted by OleSenna

Just the rubber seal.

I could be wrong, but IIRC there is a metal plate molded into those. I don't know how the screws would hold otherwise.

**bigdon-70blazer** · 06-03-2009, 07:48 AM

Quote:

Originally Posted by Blazer1970

I could be wrong, but IIRC there is a metal plate molded into those. I don't know how the screws would hold otherwise.

Just put some in and there is a metal plate molded into these for stability.

JayDubBlazer · 06-03-2009, 09:02 AM

When I purchased mine, I think from an ebay vendor they had a metal support in them. I can't see more than one manufacturer for these so I would assume all of them have the metal backing.

RLONG · 06-03-2009, 09:15 AM

I think the #3 goes with # 10 on page 15 using the same bolt holes am i wrong?

Thealien · 06-03-2009, 10:22 AM

I believe #3 screws to the top.

#10 screws to the windshield frame.

RED72blazer · 06-03-2009, 02:32 PM

# 3 screws to the top and windshield frame.

Mint68 · 06-12-2009, 12:58 AM

Quote:

Originally Posted by RED72blazer

# 3 screws to the top and windshield frame.

Thats right, connected both to the windshield frame and top.

06-02-2009, 01:28 PM	#2
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Looking for windshield frame cap/cover.. Check LMC or Classic truck

06-02-2009, 01:43 PM	#4
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: Looking for windshield frame cap/cover.. Could these from GMC Pauls be the one? No pics on their website... "69-72 Blazer Windshield Corner Water Deflectors " "Fits at top corner of windshield on either side where the vent window, removable top and windshield pillar come together. Factory type metal insert gives excellent fit every time." __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

06-02-2009, 01:59 PM	#5
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	Re: Looking for windshield frame cap/cover.. aren't those "caps" part of the door weather stripping? Check page 15 of the lmc catalog. Part number 10. __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

06-02-2009, 02:00 PM	#6
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: Looking for windshield frame cap/cover.. yes they are part of the weatherstripping...

06-02-2009, 02:06 PM	#7
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Looking for windshield frame cap/cover.. Page 15 LMC item 3 is both deflectors that is what is in your picture.

06-02-2009, 01:14 PM	#1
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Looking for windshield frame cap/cover.. Looking for this part: (hope u don't mind me using ur pic) (I checked some of the bigger websites but no luck) Attached Images __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

06-02-2009, 01:36 PM	#3
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: Looking for windshield frame cap/cover.. Already did... I've checked LMC, Classic Parts/Chevy Duty, Classic Industries, Brothers, Jim Carters... These are not the "Drip Rail Deflectors" from what I can tell. __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

06-02-2009, 06:47 PM	#8
OleSenna Roof: Bad. Sky: Good. Join Date: Jul 2007 Location: Atlanta, GA Posts: 150	Re: Looking for windshield frame cap/cover.. I think what OldCreek is looking for is not the deflectors, as shown in Item 3, page 15, of the LMC catalog. Instead, lks dcvn has it right. The caps are part of the driver and passenger door weatherstripping, as shown by Item 10 on the same page. It just so happens that I received a pair of these today, which were ordered from Manes Parts in Odessa, MO. The triangular caps are an integral part of the rubber stripping, one for each door. __________________ OleSenna

06-02-2009, 07:16 PM	#9
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: Looking for windshield frame cap/cover.. Ok. Do these have a metal insert or just the rubber seal? Attached Images __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

06-03-2009, 09:02 AM	#13
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	Re: Looking for windshield frame cap/cover.. When I purchased mine, I think from an ebay vendor they had a metal support in them. I can't see more than one manufacturer for these so I would assume all of them have the metal backing. __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

06-03-2009, 09:15 AM	#14
RLONG Registered User Join Date: Oct 2008 Location: BROOKELAND,TX Posts: 228	Re: Looking for windshield frame cap/cover.. I think the #3 goes with # 10 on page 15 using the same bolt holes am i wrong?

06-03-2009, 10:22 AM	#15
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,122	Re: Looking for windshield frame cap/cover.. I believe #3 screws to the top. #10 screws to the windshield frame.

06-03-2009, 02:32 PM	#16
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	Re: Looking for windshield frame cap/cover.. # 3 screws to the top and windshield frame. __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.