Drum Brakes on a '66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jrocket567 · 06-13-2009, 10:02 PM

Attempting to replace the front wheel cylinders on my '66 C-20. The two cylinders that are on the front wheels are different.

Also, on the right front, there is an extra bracket above the cylinder. Does anyone know what this is and why it is only on one wheel?

http://i351.photobucket.com/albums/q...0/P6120044.jpg

http://i351.photobucket.com/albums/q...0/P6130046.jpg

Thanks,
Jay

joe231 · 06-13-2009, 11:36 PM

thought I would post the pics here for ya

what bracket are you asking about?

jrocket567 · 06-14-2009, 10:18 AM

does that help?

thanks,
Jay

joe231 · 06-14-2009, 12:21 PM

what does the other side look like?
from the pics they look the same.....

jrocket567 · 06-14-2009, 02:45 PM

The picture with the shoes still on is the left side; the bracket in question is on the right side.

Since the cylinder did not fit on the left side, I put the hub and wheel back on, and pulled the right side apart to see what was going on, and found that bracket.

On the pic with the shoes, if you look at the top edges of the cylinder, you do not see the edges of the bracket that is in the picture in question.

I'll go pull the wheel off tomorrow and try to get a better comparison picture

jay

joe231 · 06-14-2009, 03:55 PM

that "bracket" is there to keep the pistons in the wheel cylinder if it didn't have the shoes and the drum on, or if the shoes wore too far down and wouldn't hold the pistons in....I believe the wheel cylinders specific to the L/F and R/F, so could you have gotten 2 left cylinders?

**Chevy Fleetside** · 06-14-2009, 04:42 PM

in it's 40+ years of existence, one of the backing plates could have been changed. Just take the wheel cylnder off and go match one up. I don't know why you are changing them as they don't appear to be leaking. Pull back the rubber and see if fluid comes out, if so then replace, otherwise they are still good. For now anyway.

jrocket567 · 06-15-2009, 05:13 PM

Quote:

Originally Posted by Chevy Fleetside

in it's 40+ years of existence, one of the backing plates could have been changed. Just take the wheel cylnder off and go match one up. I don't know why you are changing them as they don't appear to be leaking. Pull back the rubber and see if fluid comes out, if so then replace, otherwise they are still good. For now anyway.

That is my guess; the numbers on the two cylinders were no where close to matching. I'll just match each one up individually. Disks are in the future...somewhere....

The right front had fluid seeping out of the front side.

Thanks
jay

06-13-2009, 10:02 PM	#1
jrocket567 Registered User Join Date: Sep 2008 Location: Virginia Posts: 17	Drum Brakes on a '66 Attempting to replace the front wheel cylinders on my '66 C-20. The two cylinders that are on the front wheels are different. Also, on the right front, there is an extra bracket above the cylinder. Does anyone know what this is and why it is only on one wheel? http://i351.photobucket.com/albums/q...0/P6120044.jpg http://i351.photobucket.com/albums/q...0/P6130046.jpg Thanks, Jay Last edited by jrocket567; 06-13-2009 at 10:03 PM.

06-13-2009, 11:36 PM	#2
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Drum Brakes on a '66 thought I would post the pics here for ya what bracket are you asking about? __________________ *CHEVY ONLY*

06-14-2009, 10:18 AM	#3
jrocket567 Registered User Join Date: Sep 2008 Location: Virginia Posts: 17	Re: Drum Brakes on a '66 does that help? thanks, Jay

06-14-2009, 12:21 PM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Drum Brakes on a '66 what does the other side look like? from the pics they look the same..... __________________ *CHEVY ONLY*

06-14-2009, 02:45 PM	#5
jrocket567 Registered User Join Date: Sep 2008 Location: Virginia Posts: 17	Re: Drum Brakes on a '66 The picture with the shoes still on is the left side; the bracket in question is on the right side. Since the cylinder did not fit on the left side, I put the hub and wheel back on, and pulled the right side apart to see what was going on, and found that bracket. On the pic with the shoes, if you look at the top edges of the cylinder, you do not see the edges of the bracket that is in the picture in question. I'll go pull the wheel off tomorrow and try to get a better comparison picture jay

06-14-2009, 03:55 PM	#6
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Drum Brakes on a '66 that "bracket" is there to keep the pistons in the wheel cylinder if it didn't have the shoes and the drum on, or if the shoes wore too far down and wouldn't hold the pistons in....I believe the wheel cylinders specific to the L/F and R/F, so could you have gotten 2 left cylinders? __________________ *CHEVY ONLY* Last edited by joe231; 06-14-2009 at 03:55 PM.

06-14-2009, 04:42 PM	#7
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,779	Re: Drum Brakes on a '66 in it's 40+ years of existence, one of the backing plates could have been changed. Just take the wheel cylnder off and go match one up. I don't know why you are changing them as they don't appear to be leaking. Pull back the rubber and see if fluid comes out, if so then replace, otherwise they are still good. For now anyway. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 Last edited by Chevy Fleetside; 06-14-2009 at 04:47 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.