Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch radius - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70cst** · 06-05-2009, 08:43 PM

http://cgi.ebay.com/ebaymotors/Vinta...Q5fAccessories

For those who are looking for 6 bolt slots. Not mine but neat lookin.

cdowns · 06-05-2009, 09:22 PM

15"radius equals a 30"diameter

**Stocker** · 06-05-2009, 09:36 PM

^^ True enough!!

Looks like the real deal, though... cleaned up, they should look good.

Longhorn Man · 06-06-2009, 09:17 AM

those would have too much back spacing if you have a huge drop.
And when the hell did crusty old slots start selling for $200+???

cdowns · 06-06-2009, 09:24 AM

i know but down here they're asking alot for them too// not that long ago you couldn't get rid of them for $15each

**70cst** · 06-15-2009, 09:29 PM

This seller started out at $225... he is now down to $85.00... How low will he go?

crites_72 · 06-15-2009, 09:57 PM

i would love have a set of those in 5 lug

**special-K** · 06-15-2009, 10:28 PM

Those are crusty??They look as good as or better than the ones I bought and cleaned right up (after a few phases).The 8-luggers go for $300.

myfirstcarwasa73trk · 06-15-2009, 11:34 PM

Aluminum and magnesium are to separate metals aren’t they?
so to be solid --

ahh never mind.

moon · 06-16-2009, 12:48 AM

I'm only 15 minuets from South Pasadena & I'm tempted

Indyuke · 06-16-2009, 01:06 AM

Man, and to think I had a set 6 lug alum Mags that I just threw away with a truck had scrapped. And they had a good set of tires on them too. Things you do when you're 17.

texanidiot25 · 06-16-2009, 01:18 AM

I can afford those, at 85...

**70cst** · 06-16-2009, 07:50 AM

Ok...they were down to $85 and now they are listed at $145. What gives?

moon · 06-16-2009, 08:39 PM

Quote:

Originally Posted by 70cst

Ok...they were down to $85 and now they are listed at $145. What gives?

What gives, is that I'm no longer the least bit tempted.

mr48chev · 06-16-2009, 08:50 PM

Still not a bank breaker for someone who is close and they should clean up good. Around here they are few and far between now since Alumminum went sky high last year. The local place that takes scrap alunimum and cans had bins full of them (cast aluminum wheels ) last summer that guys had hauled in.

**70cst** · 06-16-2009, 08:55 PM

Quote:

Originally Posted by mr48chev

Still not a bank breaker for someone who is close and they should clean up good. Around here they are few and far between now since Alumminum went sky high last year. The local place that takes scrap alunimum and cans had bins full of them (cast aluminum wheels ) last summer that guys had hauled in.

If those wheels are in good shape physically...a little elbow grease should make them shine. To bad it's pick up only.

06-05-2009, 08:43 PM	#1
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch radius http://cgi.ebay.com/ebaymotors/Vinta...Q5fAccessories For those who are looking for 6 bolt slots. Not mine but neat lookin. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 06-05-2009 at 08:43 PM.

06-05-2009, 09:22 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra 15"radius equals a 30"diameter __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-05-2009, 09:36 PM	#3
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,595	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra ^^ True enough!! Looks like the real deal, though... cleaned up, they should look good. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

06-06-2009, 09:17 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra those would have too much back spacing if you have a huge drop. And when the hell did crusty old slots start selling for $200+???

06-06-2009, 09:24 AM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra i know but down here they're asking alot for them too// not that long ago you couldn't get rid of them for $15each __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-15-2009, 09:29 PM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra This seller started out at $225... he is now down to $85.00... How low will he go? __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-15-2009, 09:57 PM	#7
crites_72 Registered User Join Date: May 2008 Location: Mtn. Grove Mo. Posts: 155	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra i would love have a set of those in 5 lug __________________ DJ

06-15-2009, 10:28 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra Those are crusty??They look as good as or better than the ones I bought and cleaned right up (after a few phases).The 8-luggers go for $300. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-15-2009, 11:34 PM	#9
myfirstcarwasa73trk Registered User Join Date: Oct 2006 Location: TEXAS scurry Posts: 183	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra Aluminum and magnesium are to separate metals aren’t they? so to be solid -- ahh never mind.

06-16-2009, 12:48 AM	#10
moon Registered User Join Date: Nov 2007 Location: Los Angeles, CA Posts: 84	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra I'm only 15 minuets from South Pasadena & I'm tempted __________________ 1970 CST long bed Fleetside

06-16-2009, 01:06 AM	#11
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra Man, and to think I had a set 6 lug alum Mags that I just threw away with a truck had scrapped. And they had a good set of tires on them too. Things you do when you're 17.

06-16-2009, 01:18 AM	#12
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra I can afford those, at 85...

06-16-2009, 07:50 AM	#13
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra Ok...they were down to $85 and now they are listed at $145. What gives? __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-16-2009, 08:50 PM	#15
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,452	Re: Here you go...Ebay Solid Aluminum Alloy MAGS / WHEELS. 6 bolt pattern, 15 inch ra Still not a bank breaker for someone who is close and they should clean up good. Around here they are few and far between now since Alumminum went sky high last year. The local place that takes scrap alunimum and cans had bins full of them (cast aluminum wheels ) last summer that guys had hauled in. Last edited by mr48chev; 06-16-2009 at 08:51 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.