|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-19-2009, 01:43 PM
|
#1 |
|
Registered User
Join Date: Jul 2008
Location: Queen Creek, AZ
Posts: 538
|
C- notch install help?
I have my frame on stands and I'm ready to do my notch. I looked on this site and found this real helpful how to with the same cpp notch but I have a couple questions.
http://67-72chevytrucks.com/vboard/s...d.php?t=195566 in this how to it shows to line up the notch with the oval hole and not with the directions. My question is.. I want to measure for the rear end to make sure that the notch is center with the axel at full drop, but I have nothing but a frame and I cant line up the axel with the notch.... In this how to he says he measured 5 frames in his shop and they all measured out the same I just want to make sure being that I won't have the rear suspension to check.... Any help is greatly appreciated! |
|
|
|
06-19-2009, 01:56 PM
|
#2 |
|
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,685
|
Re: C- notch install help?
Do you at least have the trailing arms to help find the C/L of the axle?
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
|
|
|
|
06-20-2009, 01:05 AM
|
#3 |
|
Registered User
Join Date: Jul 2008
Location: Queen Creek, AZ
Posts: 538
|
Re: C- notch install help?
Not at the time... I built some arms out of 2x3 tubing and just tacked them together and gave them to my buddy to do a nice stitch weld with a tig. also gave him the stock ones to double check my work...I'm trying not to bug him about them but I can get at least one stock one back and go from there.....
thanks for the input |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
