blazer tank finally in! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

special70gmc · 03-27-2003, 08:29 PM

got the tank in today,didnt figure it take that long the bots supplied in the kit were kinda strande so i just cut up some threaded rod and wiled nits to the end. then i drilled hole and tacked the rod and nut to the frame. tighted everything up and done. i just can remember home much u need to cut off the cross sil in the bed does anyboy know 1 3/4 ? something like that also get the frame alsost done. the red is eching primer btw. -kyle

special70gmc · 03-27-2003, 08:30 PM

ngcfj

special70gmc · 03-27-2003, 08:30 PM

blurry

special70gmc · 03-28-2003, 08:42 AM

nobody knows how much i need to cut from the cross sill?

special70gmc · 03-28-2003, 08:42 AM

ttt

*Randy70C-10* · 03-28-2003, 09:06 AM

Sorry, don't know.....but your project is looking good.

Low69CST · 03-28-2003, 01:09 PM

I did that about a year ago. I think you need to cut maybe 1.5 - 2 inch out of the still. I remeber there wasn't much left of it when I got done. You did yours the easy way. the bed was on my truck when I put the tank in.

03-27-2003, 08:29 PM	#1
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	blazer tank finally in! got the tank in today,didnt figure it take that long the bots supplied in the kit were kinda strande so i just cut up some threaded rod and wiled nits to the end. then i drilled hole and tacked the rod and nut to the frame. tighted everything up and done. i just can remember home much u need to cut off the cross sil in the bed does anyboy know 1 3/4 ? something like that also get the frame alsost done. the red is eching primer btw. -kyle Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

03-27-2003, 08:30 PM	#2
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	ngcfj Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

03-27-2003, 08:30 PM	#3
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	blurry Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

03-28-2003, 08:42 AM	#4
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	nobody knows how much i need to cut from the cross sill? __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

03-28-2003, 08:42 AM	#5
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	ttt __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

03-28-2003, 09:06 AM	#6
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Sorry, don't know.....but your project is looking good.

03-28-2003, 01:09 PM	#7
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	I did that about a year ago. I think you need to cut maybe 1.5 - 2 inch out of the still. I remeber there wasn't much left of it when I got done. You did yours the easy way. the bed was on my truck when I put the tank in. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.