Cutting up a cab for patches..... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 06-12-2009, 07:06 PM

Quote:

Originally Posted by drunkbus

Payment sent. Thanks, Shaun

Thanks, I got it. I'll get it cut out and shipped by next week.

Quote:

Originally Posted by Robert Paul Thomas

Rob, thats exactly what I need, about five inches each side of the center of the radius on the pinch weld cut straight through the post, and about two inches of the dash. Does this help?? Rob

PM sent.

yellowGT · 06-13-2009, 01:31 AM

how much for these pieces. I need both sides. shipped to 75040

**Hart_Rod** · 06-13-2009, 08:05 AM

Quote:

Originally Posted by yellowGT

how much for these pieces. I need both sides. shipped to 75040

How about $110 shipped? Each side has a few dents but no rust. LMK.

**Hart_Rod** · 06-13-2009, 10:50 PM

Quote:

Originally Posted by Robert Paul Thomas

Rob, thats exactly what I need, about five inches each side of the center of the radius on the pinch weld cut straight through the post, and about two inches of the dash. Does this help?? Rob

Here's where I will cut it:

r/

**Hart_Rod** · 06-16-2009, 10:48 PM

BTTT I'm slicing and dicing this thing...

...who needs some cab patches? The factory cab support are still available, $150 shipped.

STOCKISH · 06-17-2009, 09:04 AM

Front section of pass side drip rail..Need it if it is rust free.

**Hart_Rod** · 06-17-2009, 11:53 AM

Quote:

Originally Posted by 1972SuperCheyenne

Front section of pass side drip rail..Need it if it is rust free.

That's already been claimed. I've got the same piece off of a suburban. Let me know and I'll post some pictures.

STOCKISH · 06-17-2009, 12:13 PM

Yeah, if it is the same Please let me know. Thanks

**Hart_Rod** · 06-17-2009, 12:58 PM

Quote:

Originally Posted by 1972SuperCheyenne

Yeah, if it is the same Please let me know. Thanks

The only difference is the roof skin. Here's a picture.

STOCKISH · 06-17-2009, 02:11 PM

All I need is a section about 6 inches back from the top corner of the A, pillar. Roof doesn't matter, just using it as a patch. By the way, how does this section look on the 'burb?

bigsnookmaster · 06-17-2009, 02:21 PM

I don't need anything, but I think it is very cool how you're helping a bunch of others out and putting a bunch of trucks together like this! And you're making decent cash by parting it out. My .02

**Hart_Rod** · 06-17-2009, 02:22 PM

$40 shipped for the roof piece. The burb's gone other than a few pieces.

STOCKISH · 06-17-2009, 02:45 PM

How long is the roof piece you have? Thanks

**Hart_Rod** · 06-17-2009, 02:52 PM

Quote:

Originally Posted by bigsnookmaster

I don't need anything, but I think it is very cool how you're helping a bunch of others out and putting a bunch of trucks together like this! And you're making decent cash by parting it out. My .02

Thanks! I love the look of your truck. Have you checked out the new 68 SWB I just picked up? Not quite the "hauler" yours is, but it hold it own. Hopefully we can meet up sometime when I get moved back to Pensacola.

R/

Quote:

Originally Posted by 1972SuperCheyenne

How long is the roof piece you have? Thanks

It goes back just past the seam, how much do you need of the front windshield part?

R/

STOCKISH · 06-17-2009, 03:00 PM

I dont need any of the windshield part. I need from the seam back about 6-8 inches. Thanks

**Hart_Rod** · 06-17-2009, 03:03 PM

Quote:

Originally Posted by 1972SuperCheyenne

I dont need any of the windshield part. I need from the seam back about 6-8 inches. Thanks

Do you need more than is posted in your picture?

STOCKISH · 06-17-2009, 03:24 PM

Maybe an inch or so. We might be talking about different seams. I was talking about the seam on top @ the drip rail. Were you refering to the seam about 4 inches further back on the bottom of my pic? Where the top of the door seals?

**Hart_Rod** · 06-17-2009, 04:15 PM

Quote:

Originally Posted by 1972SuperCheyenne

Maybe an inch or so. We might be talking about different seams. I was talking about the seam on top @ the drip rail. Were you refering to the seam about 4 inches further back on the bottom of my pic? Where the top of the door seals?

This is what I have:

.

STOCKISH · 06-19-2009, 10:42 PM

Sorry it took so long to get back to you. If you still have that piece I will take it. Could you please send me your PayPal addy? Again, very sorry.Thanks

**Hart_Rod** · 06-19-2009, 10:47 PM

Quote:

Originally Posted by 1972SuperCheyenne

Sorry it took so long to get back to you. If you still have that piece I will take it. Could you please send me your PayPal addy? Again, very sorry.Thanks

No worries, robhartley@aol.com

STOCKISH · 06-19-2009, 11:02 PM

PayPal sent. Thanks again for all your help.

**Hart_Rod** · 06-20-2009, 10:13 AM

Quote:

Originally Posted by 1972SuperCheyenne

PayPal sent. Thanks again for all your help.

Got it! Here's a picture of the drip rail. Let me know where you want me to cut it at.

STOCKISH · 06-20-2009, 12:02 PM

If you can just send me as much of the area you highlighted in post number 43 as you can for $40 we'll be good. I cant highlight it on this computer but you already clearly marked what I need. Thanks again. --Josh

**Hart_Rod** · 06-22-2009, 01:13 PM

I got everyone's cab patches shipped today except c10_1971's and I should have it shipped by the end of the week. Everyone should receive their packages by the first of next week. Let me know if you don't. Thanks again.

I still have the OEM cab braces and I'll post pictures tonight of what's left.

STOCKISH · 06-22-2009, 01:42 PM

You da man. Thanks Rob.

06-13-2009, 01:31 AM	#27
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Cutting up a cab for patches..... how much for these pieces. I need both sides. shipped to 75040 Attached Images __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

06-16-2009, 10:48 PM	#30
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: Cutting up a cab for patches..... BTTT I'm slicing and dicing this thing......who needs some cab patches? The factory cab support are still available, $150 shipped. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-17-2009, 09:04 AM	#31
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... Front section of pass side drip rail..Need it if it is rust free. Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

06-17-2009, 12:13 PM	#33
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... Yeah, if it is the same Please let me know. Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

06-17-2009, 02:11 PM	#35
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... All I need is a section about 6 inches back from the top corner of the A, pillar. Roof doesn't matter, just using it as a patch. By the way, how does this section look on the 'burb? Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 06-17-2009 at 02:11 PM.

06-17-2009, 02:21 PM	#36
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Cutting up a cab for patches..... I don't need anything, but I think it is very cool how you're helping a bunch of others out and putting a bunch of trucks together like this! And you're making decent cash by parting it out. My .02 __________________ greg http://community.webshots.com/user/68406Stepside

06-17-2009, 02:22 PM	#37
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: Cutting up a cab for patches..... $40 shipped for the roof piece. The burb's gone other than a few pieces. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-17-2009, 02:45 PM	#38
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... How long is the roof piece you have? Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

06-17-2009, 03:00 PM	#40
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... I dont need any of the windshield part. I need from the seam back about 6-8 inches. Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

06-17-2009, 03:24 PM	#42
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... Maybe an inch or so. We might be talking about different seams. I was talking about the seam on top @ the drip rail. Were you refering to the seam about 4 inches further back on the bottom of my pic? Where the top of the door seals? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

06-19-2009, 10:42 PM	#44
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... Sorry it took so long to get back to you. If you still have that piece I will take it. Could you please send me your PayPal addy? Again, very sorry.Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

06-19-2009, 11:02 PM	#46
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... PayPal sent. Thanks again for all your help. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

06-20-2009, 12:02 PM	#48
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... If you can just send me as much of the area you highlighted in post number 43 as you can for $40 we'll be good. I cant highlight it on this computer but you already clearly marked what I need. Thanks again. --Josh __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 06-20-2009 at 12:04 PM.

06-22-2009, 01:13 PM	#49
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: Cutting up a cab for patches..... I got everyone's cab patches shipped today except c10_1971's and I should have it shipped by the end of the week. Everyone should receive their packages by the first of next week. Let me know if you don't. Thanks again. I still have the OEM cab braces and I'll post pictures tonight of what's left. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 06-22-2009 at 01:14 PM.

06-22-2009, 01:42 PM	#50
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Cutting up a cab for patches..... You da man. Thanks Rob. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.