A 70 GMC now - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-30-2009, 09:42 PM

moreeeeeeee

teeitup · 03-31-2009, 10:34 PM

This has a dana 60 coil spring rear end, unsure of ratio I haven't pulled the cover yet

teeitup · 04-01-2009, 08:55 PM

This manual steering column is sold but I do have another one for sale

ERASER5 · 04-02-2009, 03:35 AM

Dana 60? How much for the rear section of the drive shaft? or the whole thing?
I have no idea what shipping would be.

teeitup · 04-02-2009, 11:47 PM

I need to check it out, if its good $50 plus shipping for the whole driveshaft. Thanks Randy

ERASER5 · 04-04-2009, 08:23 PM

So, is the drive shaft good?

bad421 · 04-04-2009, 11:57 PM

do you have any good outside door handles? and how about the metal door panels?

teeitup · 04-05-2009, 10:33 AM

Erasers, Sorry was gone all day Sat. Its raining now, if it quits I'll go out there and look.
bad421, I may have a set of driver quality door handles, I'll look
Thanks Randy

teeitup · 04-06-2009, 09:28 PM

It looks OK from what I can see, do you need the cariier bearing? Thanks Randy

ERASER5 · 04-06-2009, 10:59 PM

I would like the whole shaft. Is the carrier the teardrop style or the big clam shell type? Either way, removing the carrier would be more of a pain than leaving it on I would think.

teeitup · 04-07-2009, 12:17 AM

I'll crawl under it after work on Tues and get you a pic. I think its only 2 bolts and the carrier is loose. Thanks Randy

tim21391 · 04-07-2009, 03:06 PM

how is the battery tray. pics?

teeitup · 04-07-2009, 09:03 PM

Tim, it is rusty. I may have another one out there I'll try to look Wed
Erasers, here is a pic, carrier is worn some
Thanks Randy

tim21391 · 04-08-2009, 12:09 PM

ok thanks

teeitup · 04-08-2009, 11:30 PM

wiring pic for 4x4bowhunter
bat tray for Tim $15 plus shipping, no rust through, just surface rust

ERASER5 · 04-09-2009, 03:38 AM

Quote:

Originally Posted by teeitup

Tim, it is rusty. I may have another one out there I'll try to look Wed
Erasers, here is a pic, carrier is worn some
Thanks Randy

I'll take it. The carrier is not important to me. Let me know about the shipping and how to pay for it.

teeitup · 04-09-2009, 08:04 AM

I'll get a quote for you Fri after work, I'm gone all day today. Thanks Randy

rustbucket53 · 06-22-2009, 06:35 PM

What gear ratio id the rearend. I am looking for an Eaton HO with 4:10 shipped to 01880
Thanks
Rich

rustbucket53 · 06-22-2009, 06:36 PM

PS Just the pumpkin on the rearend

03-30-2009, 09:42 PM	#26
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now moreeeeeeee Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2009, 10:34 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now This has a dana 60 coil spring rear end, unsure of ratio I haven't pulled the cover yet __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-31-2009 at 10:35 PM.

04-01-2009, 08:55 PM	#28
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now This manual steering column is sold but I do have another one for sale __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-02-2009, 03:35 AM	#29
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: A 70 GMC now Dana 60? How much for the rear section of the drive shaft? or the whole thing? I have no idea what shipping would be. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

04-02-2009, 11:47 PM	#30
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now I need to check it out, if its good $50 plus shipping for the whole driveshaft. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-04-2009, 08:23 PM	#31
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: A 70 GMC now So, is the drive shaft good? __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

04-04-2009, 11:57 PM	#32
bad421 Registered User Join Date: Jan 2007 Location: Virginia Posts: 411	Re: A 70 GMC now do you have any good outside door handles? and how about the metal door panels? __________________ ASE MASTER TECH 1968 K10 LT1 350,SM420,T-221 lwb fleetSold 2007 Ford Ranger DD 2000 Ford F250SD V10 4x4 1968 Pontiac Firebird 468/TH400 current project 1991 Dodge W350 SRW CUMMINS POWERED Whole lotta fuel and a whole lotta Smoke

04-05-2009, 10:33 AM	#33
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now Erasers, Sorry was gone all day Sat. Its raining now, if it quits I'll go out there and look. bad421, I may have a set of driver quality door handles, I'll look Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-06-2009, 09:28 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now It looks OK from what I can see, do you need the cariier bearing? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-06-2009, 10:59 PM	#35
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: A 70 GMC now I would like the whole shaft. Is the carrier the teardrop style or the big clam shell type? Either way, removing the carrier would be more of a pain than leaving it on I would think. __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

04-07-2009, 12:17 AM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now I'll crawl under it after work on Tues and get you a pic. I think its only 2 bolts and the carrier is loose. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-07-2009, 03:06 PM	#37
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: A 70 GMC now how is the battery tray. pics? __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

04-07-2009, 09:03 PM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now Tim, it is rusty. I may have another one out there I'll try to look Wed Erasers, here is a pic, carrier is worn some Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2009, 12:09 PM	#39
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: A 70 GMC now ok thanks __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

04-08-2009, 11:30 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now wiring pic for 4x4bowhunter bat tray for Tim $15 plus shipping, no rust through, just surface rust Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-08-2009 at 11:31 PM.



Register or Log In To remove these advertisements.

04-09-2009, 08:04 AM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A 70 GMC now I'll get a quote for you Fri after work, I'm gone all day today. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-22-2009, 06:35 PM	#43
rustbucket53 Registered User Join Date: Jun 2009 Location: Wakefield Ma Posts: 10	Re: A 70 GMC now What gear ratio id the rearend. I am looking for an Eaton HO with 4:10 shipped to 01880 Thanks Rich

06-22-2009, 06:36 PM	#44
rustbucket53 Registered User Join Date: Jun 2009 Location: Wakefield Ma Posts: 10	Re: A 70 GMC now PS Just the pumpkin on the rearend

Register or Log In To remove these advertisements.