where to buy control arm .bushings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67slammer · 12-04-2008, 11:47 PM

i took the control arms off my truck to powdercoat them and i need new shaft bushings and u bolts. i found them in the lmc book but they are realy expensive. does anybody know where these parts can be picked up at a reasonable price. any info will be a great help thanks mike

dwcsr · 12-05-2008, 12:12 AM

Try Rockauto.com

Tx Firefighter · 12-05-2008, 01:21 AM

I always buy my control arm bushings at the local O Reilly parts store. They stock them.

cdowns · 12-05-2008, 02:18 AM

local autoparts will have just about anything you require for your suspension for these trucks the parts for these trucks aint rare and no need to pay shipping

dwcsr · 12-05-2008, 01:21 PM

The reason I say Rockauto is that I have found that they are usually cheaper with shipping than the local parts houses like Oreilly and Advance. Upper Moog K6098 Rock price $45, Advance price $56. Lower moog K6147 Rock price $59, Advance price $75

The local price without tax $262
$280 with 7% tax

The rock price without shipping $208
Figure about $22 shipping max and its still cheaper by $50 @$230

at rock you can get it all for about $100 if you go with the spicer service grade parts

67slammer · 12-05-2008, 04:57 PM

thanks for the help guys. i just cant wait to get the frame rolling again.

carcrazy · 06-24-2009, 11:02 AM

I purchased the ball joint from www.autopartsway.com and had great experience. Great prices and prompt delivery

redbaron69 · 06-24-2009, 02:27 PM

can you get just the bushing or is it the whole shaft

mbgmike · 06-24-2009, 04:50 PM

We are less than all the above

We sell the Moog ENTIRE shaft with bushings for $46.00 for the upper. lower $50.00
The service grade Moog for $35.00

carcrazy · 06-25-2009, 09:33 AM

Mike that is not bad at all, I will keep that in mind. By the way I see you have retail outlet in Houston where are you guys in Houston, because I am in Austin and visit Houston on regular basis.

MisterE72 · 06-25-2009, 09:47 AM

Most of the auto places I checked around here only had the inner bushings without the outer shells. I found them through truckshop: rear axel control arm bushing part number 60-14609 $12 each.

mycool72 · 06-25-2009, 10:10 AM

Isn't the question about front lower CA bushings?

12-04-2008, 11:47 PM	#1
67slammer Registered User Join Date: Jan 2008 Location: muncy pa Posts: 425	where to buy control arm .bushings i took the control arms off my truck to powdercoat them and i need new shaft bushings and u bolts. i found them in the lmc book but they are realy expensive. does anybody know where these parts can be picked up at a reasonable price. any info will be a great help thanks mike

12-05-2008, 12:12 AM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: where to buy control arm .bushings Try Rockauto.com

12-05-2008, 01:21 AM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: where to buy control arm .bushings I always buy my control arm bushings at the local O Reilly parts store. They stock them. __________________ I'm on the Instagram- @Gearhead_Kevin

12-05-2008, 02:18 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: where to buy control arm .bushings local autoparts will have just about anything you require for your suspension for these trucks the parts for these trucks aint rare and no need to pay shipping __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-05-2008, 01:21 PM	#5
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: where to buy control arm .bushings The reason I say Rockauto is that I have found that they are usually cheaper with shipping than the local parts houses like Oreilly and Advance. Upper Moog K6098 Rock price $45, Advance price $56. Lower moog K6147 Rock price $59, Advance price $75 The local price without tax $262 $280 with 7% tax The rock price without shipping $208 Figure about $22 shipping max and its still cheaper by $50 @$230 at rock you can get it all for about $100 if you go with the spicer service grade parts

12-05-2008, 04:57 PM	#6
67slammer Registered User Join Date: Jan 2008 Location: muncy pa Posts: 425	Re: where to buy control arm .bushings thanks for the help guys. i just cant wait to get the frame rolling again.

06-24-2009, 11:02 AM	#7
carcrazy Registered User Join Date: Jun 2009 Location: Autsin, TX Posts: 2	Re: where to buy control arm .bushings I purchased the ball joint from www.autopartsway.com and had great experience. Great prices and prompt delivery

06-24-2009, 02:27 PM	#8
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: where to buy control arm .bushings can you get just the bushing or is it the whole shaft __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

06-24-2009, 04:50 PM	#9
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: where to buy control arm .bushings We are less than all the above We sell the Moog ENTIRE shaft with bushings for $46.00 for the upper. lower $50.00 The service grade Moog for $35.00 Last edited by mbgmike; 06-24-2009 at 04:54 PM.

06-25-2009, 09:33 AM	#10
carcrazy Registered User Join Date: Jun 2009 Location: Autsin, TX Posts: 2	Re: where to buy control arm .bushings Mike that is not bad at all, I will keep that in mind. By the way I see you have retail outlet in Houston where are you guys in Houston, because I am in Austin and visit Houston on regular basis.

06-25-2009, 09:47 AM	#11
MisterE72 Keep Your Nose Clean Join Date: Dec 2006 Location: California Posts: 496	Re: where to buy control arm .bushings Most of the auto places I checked around here only had the inner bushings without the outer shells. I found them through truckshop: rear axel control arm bushing part number 60-14609 $12 each. Attached Images

06-25-2009, 10:10 AM	#12
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: where to buy control arm .bushings Isn't the question about front lower CA bushings?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.