The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-28-2003, 07:42 PM   #1
Izzy
Trucker.
 
Izzy's Avatar
 
Join Date: Nov 2002
Location: Fort Worth, TX
Posts: 1,364
Pulling A/C and heat??

What would I need to pull if I wanted to pull the A/C, heat all together out of the truck?
I know the Compressor and all lines coming off that, condesonr, box on firewall and all the components under the dash? What else?
I don't drive this sucker much and I'm gonna start smoothing the firewall soon.

I'll get some updated pics this weekend after I do the stake pockets, finish up the pan and get the hood fully bolted on too.
Izzy is offline   Reply With Quote
Old 03-28-2003, 07:46 PM   #2
rage'nrat638
Account Suspended
 
rage'nrat638's Avatar
 
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
sounds like about a 12 pack to me. the heater core?
rage'nrat638 is offline   Reply With Quote
Old 03-28-2003, 08:07 PM   #3
Izzy
Trucker.
 
Izzy's Avatar
 
Join Date: Nov 2002
Location: Fort Worth, TX
Posts: 1,364
Quote:
Originally posted by marksdoor69
sounds like about a 12 pack to me. the heater core?
Actually I'll give my buddies a 12'er of Coors and they'll help. I figured the core but I'm just making sure there's nothing I'm forgetting.
Izzy is offline   Reply With Quote
Old 03-28-2003, 08:18 PM   #4
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
dood, don't forget to remove the surface garvity viscostiy moduelator, that thing will explode if you don't
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 03-28-2003, 08:37 PM   #5
Izzy
Trucker.
 
Izzy's Avatar
 
Join Date: Nov 2002
Location: Fort Worth, TX
Posts: 1,364
Quote:
Originally posted by low 84
dood, don't forget to remove the surface garvity viscostiy moduelator, that thing will explode if you don't
Would that be the same one you were polishing up nice and purty for me in houston last weekend? :p

Last edited by Izzy; 03-28-2003 at 08:42 PM.
Izzy is offline   Reply With Quote
Old 03-28-2003, 09:02 PM   #6
1FaastC10
Account Suspended
 
1FaastC10's Avatar
 
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,400
while you're at it you can go ahead and take that air ride suspension of too AIR conditioning - AIR ride... gotta be connected right? i'll give you $100 for that old useless junk.
1FaastC10 is offline   Reply With Quote
Old 03-28-2003, 11:58 PM   #7
Blue Beard
Registered User
 
Blue Beard's Avatar
 
Join Date: Jan 2003
Location: Washington State
Posts: 8,834
All associated vaccuum lines, and electrical switchs.......

Get electrical prints for taking out and putting things the way you want...........
__________________
1970 Chev CST
2003 Harley Fatboy
1975 Chevrolet Step Van
1956 Chev Bel Air
1977 Blazer 2WD For Sale $3000.00
1978 Blazer 2WD For Sale $7000.00
1978 Silverado
2005 Monte Carlo
Blue Beard is offline   Reply With Quote
Old 03-29-2003, 02:29 AM   #8
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
Quote:
Originally posted by fiveeightchevy

Would that be the same one you were polishing up nice and purty for me in houston last weekend? :p
yeah thats it. be carefull its volatile (sp?) it could take your arm off.
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
Old 03-29-2003, 10:57 AM   #9
Izzy
Trucker.
 
Izzy's Avatar
 
Join Date: Nov 2002
Location: Fort Worth, TX
Posts: 1,364
Quote:
Originally posted by 1FaastC10
while you're at it you can go ahead and take that air ride suspension of too AIR conditioning - AIR ride... gotta be connected right? i'll give you $100 for that old useless junk.
LOL... Well if I ever find out about these KP Components bolt in cantilevers or the back halfs that Road surfer is doing I'll have a weld in parallel link and bags for sale.
Izzy is offline   Reply With Quote
Old 03-29-2003, 10:58 AM   #10
Izzy
Trucker.
 
Izzy's Avatar
 
Join Date: Nov 2002
Location: Fort Worth, TX
Posts: 1,364
Quote:
Originally posted by low 84


yeah thats it. be carefull its volatile (sp?) it could take your arm off.
That's what I heard Kendall say, you were trying to break that fool out and show it to everyone sat night.
Izzy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:34 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com