1980 GMC whole or parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pashtrd · 03-29-2003, 06:33 PM

new motor, doors, fenders perfect. cab is iffy. doors sag due to cab rust. runs/drives. battery doesnt hold charge. voltage regulator is bad. i was told it was a posi. 4wd works. no AC. lockouts work. utility box w/ladder rack. bed extension. windshield cracked, all other glass good. whole or i will part it out. $600 whole truck. email with parts needed will not ship big parts. or sheetmetal.
pashtrd@webtv.net
thanks
matt

pashtrd · 03-29-2003, 06:35 PM

another pic.

79GMC454C35 · 03-30-2003, 10:35 AM

Can you post pictures & price on the Grille? What condition is it in?
Thanks

pashtrd · 03-30-2003, 12:13 PM

the grill is broken
matt

pashtrd · 03-30-2003, 12:55 PM

just posting some asking prices for some parts. fenders-$25 each, doors-$25 each good shape. motor 350 standard bore $200 just freshened up. trans/transfer $100 both good. utility box $100. ladder rack-$30. or make offer on anything or everything. i just need to get some $$ out of this.and get it gone. have clear title. good front bumper-$25 again i will not ship the big stuff or sheetmetal. has tan interior. chrome rims/tires have some dry rot bfg all terrains-$150 31x10ish?? i think. will have to check. grill is broken. core support$50 inner fenders $20 each all good or complete front clip (hood is junk) $100 all prices open to offers.
matt

r0lf- · 03-30-2003, 02:04 PM

if you can find a cheap way to send them to cali, Ill take a Driverside fender and passenger side door. I just cant afford so much for shipping.

pashtrd · 03-30-2003, 08:05 PM

sorry i dont want to deal with shipping sheetmetal. too much packing etc.
matt

chevy_fatman · 03-30-2003, 08:33 PM

Man, if you just were closer, I could use a truck like that, and the price is right too, good luck selling it tough.

pashtrd · 03-31-2003, 02:10 PM

here are the compression numbers from the motor in the GMC. #1-120psi. #2-125psi. #3-130psi. #4-130psi. #5-125psi. #6-125psi. #7-125psi. #8-125psi. oil pressure when cold 75 psi. hot- 40psi. motor runs good. carbuerator is a pile of cr@p. cam specs- lift-intake @cam-2800 @ valve 420, exhaust @cam 2947 @ valve 442. 1.5 rocker ratio. cam is a summit brand part #SUM-1102. high volume oil pump. new fuel pump, cap, wires, rotor, plugs. i will be pulling the motor by this weekend. if anyone is interested please email me. especially if you want to hear it run. motor complete $200
pashtrd@webtv.net
thanks
matt

pashtrd · 03-31-2003, 02:11 PM

one more thing it has a 12 bolt posi rearend.
matt

79BIG10 · 03-31-2003, 07:32 PM

How are the door panels? Do you have a pic of them?

pashtrd · 03-31-2003, 08:47 PM

door panels are two different colors of brown and kind of nasty looking. but in good shape. i will take pics of them tomorrow.
matt

pashtrd · 04-01-2003, 09:40 AM

pics of door panels $15/pair + shipping

pashtrd · 04-01-2003, 09:42 AM

pass. side

*Pardue'sCustoms* · 04-02-2003, 07:49 AM

how the dash look and dash pad and how much

pashtrd · 04-02-2003, 08:02 AM

the dash pad is cracked. what do you mean when you say the dash?
matt

pashtrd · 04-03-2003, 08:40 AM

UPDATE. i will ship some parts. anything small. also wll ship motor/trans/transfer case but buyer must make all shipping arrangements. i still will not ship sheetmetal. again complete rebuilt running motor $200. trans-shifts fine (slow into reverse when cold) $30. transfer case works good $30.
matt

silvereagle1770 · 04-05-2003, 09:33 AM

what tranny and case is in it 350 203 350 205 thanks

pashtrd · 04-06-2003, 11:13 PM

silvereagle1770, i have no idea what trans/transfer it has. i know it is a part time transfer. i assume a th350. but i am not positive.

pashtrd · 04-06-2003, 11:23 PM

i need this truck gone soon. my mom is getting out of the hospitol this week after a 6+week stay. and she wll be staying with me for a while. my wife and i will need to take care of her.i dont have time to pull any parts so, complete truck $300.
cab is in very rough shape. and getting worse everyday.but it has lots of good useable parts on it. good doors, fenders, NEW motor, 12 bolt posi rear etc. etc.
rear brake line blew out on it today when i was moving it in my driveway. it still stops, but front is locking up if it is wet out.
someone must need a cheap parts truck near or in WI. i guarantee the motor runs. and the compression/oil pressure numbers i gave to be 100% accurate.i will perform another compression test for any potential buyer. i have all receipts for rebuild. i jst need it gone and i dont want to junk it i want someone who can use it to get it.
thanks
Matt

ChrisK10 · 04-07-2003, 06:23 PM

Just wondering, what gear ratio does the rear end posi have and how good of condition is it in? Thanks.

-Chris

pashtrd · 04-07-2003, 08:29 PM

i have no idea the gear ratio. there is no tag on the rear cover. would it be listed anywhere else on the truck? it seems to be in good shape nice and tight.
matt

gldevall · 04-07-2003, 09:08 PM

I need the brackets off the block that bolt to the motor mounts. You still have'em?

**ScottH** · 04-08-2003, 11:59 AM

Matt, I'd take the engine but shipping costs to NJ would probably be too much. If you were closer I'd buy the whole truck. Good luck with everything!

Truckboy · 04-08-2003, 01:19 PM

Where is Oak Creek Wisconsin? I live in southeast Ne. and need to see if it's a feasible deal. Thanks
Mark

03-31-2003, 02:10 PM	#9
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	ENGINE SPECS here are the compression numbers from the motor in the GMC. #1-120psi. #2-125psi. #3-130psi. #4-130psi. #5-125psi. #6-125psi. #7-125psi. #8-125psi. oil pressure when cold 75 psi. hot- 40psi. motor runs good. carbuerator is a pile of cr@p. cam specs- lift-intake @cam-2800 @ valve 420, exhaust @cam 2947 @ valve 442. 1.5 rocker ratio. cam is a summit brand part #SUM-1102. high volume oil pump. new fuel pump, cap, wires, rotor, plugs. i will be pulling the motor by this weekend. if anyone is interested please email me. especially if you want to hear it run. motor complete $200 pashtrd@webtv.net thanks matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-31-2003, 02:11 PM	#10
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	one more thing it has a 12 bolt posi rearend. matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-31-2003, 07:32 PM	#11
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	How are the door panels? Do you have a pic of them? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

03-31-2003, 08:47 PM	#12
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	door panels are two different colors of brown and kind of nasty looking. but in good shape. i will take pics of them tomorrow. matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

04-01-2003, 09:40 AM	#13
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	pics of door panels $15/pair + shipping Attached Images __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-29-2003, 06:33 PM	#1
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	1980 GMC whole or parts new motor, doors, fenders perfect. cab is iffy. doors sag due to cab rust. runs/drives. battery doesnt hold charge. voltage regulator is bad. i was told it was a posi. 4wd works. no AC. lockouts work. utility box w/ladder rack. bed extension. windshield cracked, all other glass good. whole or i will part it out. $600 whole truck. email with parts needed will not ship big parts. or sheetmetal. pashtrd@webtv.net thanks matt Attached Images __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-29-2003, 06:35 PM	#2
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	another pic. Attached Images __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-30-2003, 10:35 AM	#3
79GMC454C35 Registered User Join Date: Mar 2003 Location: Arizona Posts: 115	re: Parts Can you post pictures & price on the Grille? What condition is it in? Thanks

03-30-2003, 12:13 PM	#4
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	the grill is broken matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-30-2003, 12:55 PM	#5
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	prices just posting some asking prices for some parts. fenders-$25 each, doors-$25 each good shape. motor 350 standard bore $200 just freshened up. trans/transfer $100 both good. utility box $100. ladder rack-$30. or make offer on anything or everything. i just need to get some $$ out of this.and get it gone. have clear title. good front bumper-$25 again i will not ship the big stuff or sheetmetal. has tan interior. chrome rims/tires have some dry rot bfg all terrains-$150 31x10ish?? i think. will have to check. grill is broken. core support$50 inner fenders $20 each all good or complete front clip (hood is junk) $100 all prices open to offers. matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-30-2003, 02:04 PM	#6
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	if you can find a cheap way to send them to cali, Ill take a Driverside fender and passenger side door. I just cant afford so much for shipping.

03-30-2003, 08:05 PM	#7
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	sorry i dont want to deal with shipping sheetmetal. too much packing etc. matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

03-30-2003, 08:33 PM	#8
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Man, if you just were closer, I could use a truck like that, and the price is right too, good luck selling it tough. __________________ Paul How do you make the invisible, visible?.........You take it away.

04-01-2003, 09:42 AM	#14
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	pass. side Attached Images __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

04-02-2003, 07:49 AM	#15
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	how the dash look and dash pad and how much



Register or Log In To remove these advertisements.

04-02-2003, 08:02 AM	#16
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	the dash pad is cracked. what do you mean when you say the dash? matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

04-03-2003, 08:40 AM	#17
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	UPDATE. i will ship some parts. anything small. also wll ship motor/trans/transfer case but buyer must make all shipping arrangements. i still will not ship sheetmetal. again complete rebuilt running motor $200. trans-shifts fine (slow into reverse when cold) $30. transfer case works good $30. matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

04-05-2003, 09:33 AM	#18
silvereagle1770 Registered User Join Date: Oct 2002 Location: michgan Posts: 57	what tranny and case is in it 350 203 350 205 thanks __________________ 79 4x4 short box

04-06-2003, 11:13 PM	#19
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	silvereagle1770, i have no idea what trans/transfer it has. i know it is a part time transfer. i assume a th350. but i am not positive. __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

04-06-2003, 11:23 PM	#20
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	PRICE REDUCED i need this truck gone soon. my mom is getting out of the hospitol this week after a 6+week stay. and she wll be staying with me for a while. my wife and i will need to take care of her.i dont have time to pull any parts so, complete truck $300. cab is in very rough shape. and getting worse everyday.but it has lots of good useable parts on it. good doors, fenders, NEW motor, 12 bolt posi rear etc. etc. rear brake line blew out on it today when i was moving it in my driveway. it still stops, but front is locking up if it is wet out. someone must need a cheap parts truck near or in WI. i guarantee the motor runs. and the compression/oil pressure numbers i gave to be 100% accurate.i will perform another compression test for any potential buyer. i have all receipts for rebuild. i jst need it gone and i dont want to junk it i want someone who can use it to get it. thanks Matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

04-07-2003, 06:23 PM	#21
ChrisK10 1971 C20 Custom Camper Join Date: Mar 2003 Location: Ames/Shenandoah, IA Posts: 1,435	rear end Just wondering, what gear ratio does the rear end posi have and how good of condition is it in? Thanks. -Chris __________________ '71 Chevy C20 Custom Camper, 454, TH400 '97 GMC K1500 5.7L

04-07-2003, 08:29 PM	#22
pashtrd Registered User Join Date: Mar 2003 Location: oak creek WI Posts: 82	i have no idea the gear ratio. there is no tag on the rear cover. would it be listed anywhere else on the truck? it seems to be in good shape nice and tight. matt __________________ never argue with an idiot, they will drag you down to their level, and beat you with experience.

04-07-2003, 09:08 PM	#23
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	I need the brackets off the block that bolt to the motor mounts. You still have'em? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

04-08-2003, 11:59 AM	#24
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Matt, I'd take the engine but shipping costs to NJ would probably be too much. If you were closer I'd buy the whole truck. Good luck with everything!

04-08-2003, 01:19 PM	#25
Truckboy Registered User Join Date: Jan 2001 Location: Nebraska Posts: 251	Where is Oak Creek Wisconsin? I live in southeast Ne. and need to see if it's a feasible deal. Thanks Mark __________________ 70 c-10 72 c-20 85 Custom 1/2 ton (Former construction truck with 247,000 miles)

Register or Log In To remove these advertisements.