72 c-10 350/350 - the wylie new guy - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LowBow · 04-08-2009, 04:57 PM

is your distributor on the front side of your motor? I didn't know GM ever did that on a 350?

LOW DOUGH · 04-08-2009, 05:21 PM

Quote:

Originally Posted by LowBow

is your distributor on the front side of your motor? I didn't know GM ever did that on a 350?

That's the thermostat hole..... I thought the same thing the first time i looked at the pic.

LOW DOUGH · 04-08-2009, 05:27 PM

It looks like it has the 4 bolt holes for a Holley and or Edle/Quadrajet. Or is it the acctual 4 bore holes that is the problem. What if you use a spacer/adaptor. That would/should bring the carb up to give the butterflyes room. You would want an open bore addapter. AZ sells them. I'll show you next time I see you.

Sure is a different looking intake. What kind is it? Can't tell what it says.

krue · 04-08-2009, 06:12 PM

You need to be a subscribed member to post stuff for sale.

**passthebuck** · 04-08-2009, 06:51 PM

Thats an Edelbrock C4B. It's got big runners that are similar to the Z28 intakes & it is from the pre-HEI days so HEI wont fit. You could try one of those small-cap HEI's that everybody seems to have nowadays. It's considered retro now...

wayfastwhitey · 04-08-2009, 11:56 PM

not trying to sell it, it was more of a coincidence, that's why i said it. my bad.

i bought the adapter today, 22.51 with the discount.

i don't beleive chevrolet ever had a front mount dizzy (atleast in a V8)

hopefully i wont have any clearance issues after the adapter is on. i don't think i will but if i do then idk what i'll do. i won't swap the intakes back, that's for sure, i cant afford any more gaskets. i spent my last dollar on the adapter so let's hope i don't need too many more parts to make this thing run

LOW DOUGH · 06-02-2009, 10:18 AM

so, were is it at now? What's going on with it. Did you get it started?

dfwright · 06-02-2009, 10:56 AM

So now there's a Corvette option and an Impala option?

72 SHORTBED 7.0 · 06-05-2009, 02:01 AM

Good deal I see you're in wylie I'm up the road from you on 205 ,good luck

LOW DOUGH · 06-05-2009, 09:17 AM

Quote:

Originally Posted by 72 SHORTBED 7.0

Good deal I see you're in wylie I'm up the road from you on 205 ,good luck

Me and wayfast work together at the AutoZone in wylie. You should stop by. With the truck.

72 SHORTBED 7.0 · 06-05-2009, 10:44 AM

Yea right now I just started on my truck I pull the front. I'll stop by one day who should I ask for .. I may do the whole truck but for now may put in a 6.0 L and D.D it for some time.I let my buddy's son have my o8 4000 miles have it BLK on BLK crew cab I miss that truck

,I don't miss that payment. Let me know or PM me . Good luck

wayfastwhitey · 06-29-2009, 11:58 AM

just ask for drew or mikie. we aren't there every day, we tend to work together on saturdays though

View Poll Results: was this a good buy?
horrible	0	0%
bad	1	2.04%
good	21	42.86%
awesome!	27	55.10%
Voters: 49. You may not vote on this poll

04-08-2009, 04:57 PM	#26
LowBow Self Made Hundredaire Join Date: Dec 2008 Location: Tallahassee, Fl Posts: 173	Re: 72 c-10 350/350 - the wylie new guy is your distributor on the front side of your motor? I didn't know GM ever did that on a 350? __________________ '79 corvette - all original 49k car! '03 Z71 ECSB - gas hog '57 Belair 2 door hardtop. Love of my life!

04-08-2009, 05:27 PM	#28
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: 72 c-10 350/350 - the wylie new guy It looks like it has the 4 bolt holes for a Holley and or Edle/Quadrajet. Or is it the acctual 4 bore holes that is the problem. What if you use a spacer/adaptor. That would/should bring the carb up to give the butterflyes room. You would want an open bore addapter. AZ sells them. I'll show you next time I see you. Sure is a different looking intake. What kind is it? Can't tell what it says. Last edited by LOW DOUGH; 04-08-2009 at 05:28 PM.

04-08-2009, 06:12 PM	#29
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: 72 c-10 350/350 - the wylie new guy You need to be a subscribed member to post stuff for sale. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

04-08-2009, 06:51 PM	#30
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: 72 c-10 350/350 - the wylie new guy Thats an Edelbrock C4B. It's got big runners that are similar to the Z28 intakes & it is from the pre-HEI days so HEI wont fit. You could try one of those small-cap HEI's that everybody seems to have nowadays. It's considered retro now... __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

04-08-2009, 11:56 PM	#31
wayfastwhitey right below above average joe Join Date: Mar 2009 Location: palm bay, fl Posts: 107	Re: 72 c-10 350/350 - the wylie new guy not trying to sell it, it was more of a coincidence, that's why i said it. my bad. i bought the adapter today, 22.51 with the discount. i don't beleive chevrolet ever had a front mount dizzy (atleast in a V8) hopefully i wont have any clearance issues after the adapter is on. i don't think i will but if i do then idk what i'll do. i won't swap the intakes back, that's for sure, i cant afford any more gaskets. i spent my last dollar on the adapter so let's hope i don't need too many more parts to make this thing run

06-02-2009, 10:18 AM	#32
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: 72 c-10 350/350 - the wylie new guy so, were is it at now? What's going on with it. Did you get it started?

06-02-2009, 10:56 AM	#33
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: 72 c-10 350/350 - the wylie new guy So now there's a Corvette option and an Impala option? __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

06-05-2009, 02:01 AM	#34
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: 72 c-10 350/350 - the wylie new guy Good deal I see you're in wylie I'm up the road from you on 205 ,good luck

06-05-2009, 10:44 AM	#36
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: 72 c-10 350/350 - the wylie new guy Yea right now I just started on my truck I pull the front. I'll stop by one day who should I ask for .. I may do the whole truck but for now may put in a 6.0 L and D.D it for some time.I let my buddy's son have my o8 4000 miles have it BLK on BLK crew cab I miss that truck ,I don't miss that payment. Let me know or PM me . Good luck

06-29-2009, 11:58 AM	#37
wayfastwhitey right below above average joe Join Date: Mar 2009 Location: palm bay, fl Posts: 107	Re: 72 c-10 350/350 - the wylie new guy just ask for drew or mikie. we aren't there every day, we tend to work together on saturdays though __________________ i flush the of weakness with mushroom clouds at hand '95 short bed x cab c1500... just another old truck someone else beat up, abused, hacked and didnt respect... my turn to turn it into a beat up old truck into a beat up and reliable pleasure to drive... them- "when you gonna put an exhaust on that thing?" me- "what do you mean? The exhaust comes all the way to the bumber and sounds great!" them- "straight pipes isnt an exhaust man..." me- "meh... who needs a fancy muffler when you've got straight pipes? its got a cat, doesnt resonate, and I like how it sounds, and to be perfectly honest, it makes me behave myself when I'm out and about!" ^^^ favorite conversation about my truck to date



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.