Anyone make a 2.5" spindle for 88-98's? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tom · 07-05-2009, 09:13 PM

Right now I've got 2" spindles and 3" springs on my 98. The frontend needs to be just a little lower, another 1/4-1/2" would be perfect. I know theres nothing past 3" in springs, is there any other option besides bags?

Kontrol Phreaks · 07-06-2009, 05:15 PM

Nobody makes a 2.5 spindle for those trucks. Unforntunately your last option is to cut the coil spring down, which is typically a last resort option.

ruffrida2005 · 07-06-2009, 06:21 PM

If your good at welding you could cut your lower control arm and make the cup sit a little bit lower and just weld it all back up. I wouldn't cut the spring if you could do that to the lower control arm. Dont heat the spring cuz it make the ride suck and it's hard to get them even.

07-05-2009, 09:13 PM	#1
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,714	Anyone make a 2.5" spindle for 88-98's? Right now I've got 2" spindles and 3" springs on my 98. The frontend needs to be just a little lower, another 1/4-1/2" would be perfect. I know theres nothing past 3" in springs, is there any other option besides bags? __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

07-06-2009, 05:15 PM	#2
Kontrol Phreaks Registered User Join Date: Feb 2006 Location: Central Cali Posts: 242	Re: Anyone make a 2.5" spindle for 88-98's? Nobody makes a 2.5 spindle for those trucks. Unforntunately your last option is to cut the coil spring down, which is typically a last resort option. __________________ - Clint -

07-06-2009, 06:21 PM	#3
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Anyone make a 2.5" spindle for 88-98's? If your good at welding you could cut your lower control arm and make the cup sit a little bit lower and just weld it all back up. I wouldn't cut the spring if you could do that to the lower control arm. Dont heat the spring cuz it make the ride suck and it's hard to get them even. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.