Best fitting inner rocker/floor section ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Green Machine** · 07-06-2009, 12:15 AM

Need to replace inner rockers. Found these two pieces so far. Looks much better than trying to use the seperate pieces that are available. Maybe the pics are just left and right sides, but some bolt holes look different for example.

Has anyone one used these parts and how well did they fit ?

Is there more than one manufacturer ?

What brand should I look for for best fit - like Tri-plus or something like that ?

Thanks in advance.

http://www.brotherstrucks.com/prodin...number=RFPS750

http://www.manestruckparts.com/store...ID=1036&index=

mbgmike · 07-06-2009, 05:55 PM

Quote:

Originally Posted by Green Machine

Need to replace inner rockers. Found these two pieces so far. Looks much better than trying to use the seperate pieces that are available. Maybe the pics are just left and right sides, but some bolt holes look different for example.

Has anyone one used these parts and how well did they fit ?

Is there more than one manufacturer ?

What brand should I look for for best fit - like Tri-plus or something like that ?

Thanks in advance.

http://www.brotherstrucks.com/prodin...number=RFPS750

http://www.manestruckparts.com/store...ID=1036&index=

Brothers sells Triplus and not sure on Manes. It is a real quality part. We have installed them and they actualy fit. Here are some pics. The bolt holes in the front line up and the raised floor section actually lines up and so does the Seatbelt hole on back. I was impressed. We sell them of course for less than Brothers. I think our price is $45.00.

jsmithbm · 07-06-2009, 06:20 PM

The one from brothers or whom ever sells it for the best price, look alot better than the ones that LMC has. I would rather do the whole section than trying to weld in the inner then the outer rocker. Seems like this would be simpler.

mbgmike · 07-06-2009, 06:37 PM

The picture from Manes is actually a 64-66 panel

**Green Machine** · 07-06-2009, 10:45 PM

Quote:

Originally Posted by mbgmike

The picture from Manes is actually a 64-66 panel

OK - well is that why, good eye, I would never know, except it did not look the same !!!

07-06-2009, 12:15 AM	#1
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Best fitting inner rocker/floor section ??? Need to replace inner rockers. Found these two pieces so far. Looks much better than trying to use the seperate pieces that are available. Maybe the pics are just left and right sides, but some bolt holes look different for example. Has anyone one used these parts and how well did they fit ? Is there more than one manufacturer ? What brand should I look for for best fit - like Tri-plus or something like that ? Thanks in advance. http://www.brotherstrucks.com/prodin...number=RFPS750 http://www.manestruckparts.com/store...ID=1036&index= __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

07-06-2009, 06:20 PM	#3
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Best fitting inner rocker/floor section ??? The one from brothers or whom ever sells it for the best price, look alot better than the ones that LMC has. I would rather do the whole section than trying to weld in the inner then the outer rocker. Seems like this would be simpler.

07-06-2009, 06:37 PM	#4
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Best fitting inner rocker/floor section ??? The picture from Manes is actually a 64-66 panel



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.