aluminum TH400 deep trans pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

p-low · 06-30-2009, 10:58 AM

aluminum TH400 deep trans pan with extension tube for the filter and the correct bolt and spacer for the filter as well.... i switched to a short pan for clearance issues due t my frame sitting on the ground

will sell for $30 plus shipping......shipping will be around $15 any where in the lower 48

6772king · 06-30-2009, 11:16 AM

do u have any pics of it ?? thanks

turp mcspray · 07-04-2009, 02:17 PM

Is the pan still for sale?

turp mcspray · 07-08-2009, 09:55 PM

Is the pan still for sale and do you have a pic?

p-low · 07-08-2009, 10:39 PM

pan is still for sale....will post a pic or two tomorrow...6772king first in line then turp

6772king · 07-09-2009, 05:32 PM

sounds good thanks

p-low · 07-09-2009, 07:32 PM

here are some pics....absolutely my bad it is a steel pan....it is in great shape with just light scratching on the bottom that go wet once and has really light surface rust that almost all wipes off.....like i said i would be using it but i am so low that i needed a short pan....comes with the filter extension tube and bolt and spacer that are shown in the pics......since its not aluminum will sell for $40 shipped to lower 48

p-low · 07-09-2009, 07:35 PM

pics

6772king · 07-09-2009, 08:07 PM

I,m going to pass,, thats the same pan i have just wanted to upgrade 2 aluminum pan,,,thanks though

turp mcspray · 07-09-2009, 08:14 PM

I was also looking for aluminum over the steel one I have. Thanks for posting a pic!

06-30-2009, 10:58 AM	#1
p-low Registered User Join Date: Feb 2006 Location: buffalo Posts: 178	aluminum TH400 deep trans pan aluminum TH400 deep trans pan with extension tube for the filter and the correct bolt and spacer for the filter as well.... i switched to a short pan for clearance issues due t my frame sitting on the ground will sell for $30 plus shipping......shipping will be around $15 any where in the lower 48

06-30-2009, 11:16 AM	#2
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: aluminum TH400 deep trans pan do u have any pics of it ?? thanks __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

07-04-2009, 02:17 PM	#3
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: aluminum TH400 deep trans pan Is the pan still for sale? __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

07-08-2009, 09:55 PM	#4
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: aluminum TH400 deep trans pan Is the pan still for sale and do you have a pic? __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

07-08-2009, 10:39 PM	#5
p-low Registered User Join Date: Feb 2006 Location: buffalo Posts: 178	Re: aluminum TH400 deep trans pan pan is still for sale....will post a pic or two tomorrow...6772king first in line then turp

07-09-2009, 05:32 PM	#6
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: aluminum TH400 deep trans pan sounds good thanks __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

07-09-2009, 07:32 PM	#7
p-low Registered User Join Date: Feb 2006 Location: buffalo Posts: 178	Re: aluminum TH400 deep trans pan here are some pics....absolutely my bad it is a steel pan....it is in great shape with just light scratching on the bottom that go wet once and has really light surface rust that almost all wipes off.....like i said i would be using it but i am so low that i needed a short pan....comes with the filter extension tube and bolt and spacer that are shown in the pics......since its not aluminum will sell for $40 shipped to lower 48

07-09-2009, 07:35 PM	#8
p-low Registered User Join Date: Feb 2006 Location: buffalo Posts: 178	Re: aluminum TH400 deep trans pan pics Attached Images

07-09-2009, 08:07 PM	#9
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: aluminum TH400 deep trans pan I,m going to pass,, thats the same pan i have just wanted to upgrade 2 aluminum pan,,,thanks though __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

07-09-2009, 08:14 PM	#10
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: aluminum TH400 deep trans pan I was also looking for aluminum over the steel one I have. Thanks for posting a pic! __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.