Do you see anything wrong - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Fenders · 07-09-2009, 01:25 PM

with this pulley set-up?

First on belt...harmonic balancer...fan pulley ...power steering pump. Second belt...harmonic balancer ..fan pulley...alternator pulley.
Doing the fitting before the install..
Bob

71swb4x4 · 07-09-2009, 01:35 PM

I would not run two belts to the harmonic balancer and water pump. I would run the power steering directly off the harmonic balancer, skip the water pump.

**Captainfab** · 07-09-2009, 11:31 PM

The factory ran the power steering belt over the water pump.....besides I don't think you can just run it from the balancer without touching the water pump pulley.

**Corts60** · 07-09-2009, 11:41 PM

All my small blocks have always run from the harmonic balancer to the power steering directly with no problems...

protrash64 · 07-09-2009, 11:57 PM

Quote:

Originally Posted by Corts60

All my small blocks have always run from the harmonic balancer to the power steering directly with no problems...

x2

Hickup pickup · 07-10-2009, 01:07 AM

The pully on the power steering is" not like the others"...............Did I win? lol

joe231 · 07-10-2009, 08:19 AM

one of these things are not like the others

what kind of manifolds are you gonna run?

on all my small blocks, the p/s belt ran around the water pump, don't see what it would hurt, they all turn the same speed, the more belt to pulley contact you have the better IMO

what is the black bracket sticking up over the driver's side valve cover?

Big Fenders · 07-10-2009, 09:01 AM

[QUOTE=joe231;3404719]

one of these things are not like the others

what kind of manifolds are you gonna run?

on all my small blocks, the p/s belt ran around the water pump, don't see what it would hurt, they all turn the same speed, the more belt to pulley contact you have the better IMO

what is the black bracket sticking up over the driver's side valve cover?[/QUOT
I'm using hedders...
That's what I was thinking as far as pulley arrangment, both belts using fan pulley.
That black bracket above drivers side valve cover is a "pull' point for chain.. Thanks all for the help..
Bob

07-09-2009, 01:25 PM	#1
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Do you see anything wrong with this pulley set-up? First on belt...harmonic balancer...fan pulley ...power steering pump. Second belt...harmonic balancer ..fan pulley...alternator pulley. Doing the fitting before the install.. Bob Attached Images

07-09-2009, 01:35 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Do you see anything wrong I would not run two belts to the harmonic balancer and water pump. I would run the power steering directly off the harmonic balancer, skip the water pump. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

07-09-2009, 11:31 PM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Do you see anything wrong The factory ran the power steering belt over the water pump.....besides I don't think you can just run it from the balancer without touching the water pump pulley. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-09-2009, 11:41 PM	#4
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: Do you see anything wrong All my small blocks have always run from the harmonic balancer to the power steering directly with no problems... __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

07-10-2009, 01:07 AM	#6
Hickup pickup Registered User Join Date: Dec 2008 Location: Gilbert , Az Posts: 369	Re: Do you see anything wrong The pully on the power steering is" not like the others"...............Did I win? lol __________________ 2-20, 2-21 whatever it takes!

07-10-2009, 08:19 AM	#7
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Do you see anything wrong one of these things are not like the others what kind of manifolds are you gonna run? on all my small blocks, the p/s belt ran around the water pump, don't see what it would hurt, they all turn the same speed, the more belt to pulley contact you have the better IMO what is the black bracket sticking up over the driver's side valve cover? __________________ *CHEVY ONLY* Last edited by joe231; 07-10-2009 at 08:20 AM.

07-10-2009, 09:01 AM	#8
Big Fenders Registered User Join Date: Mar 2008 Location: Tucson Arizona Posts: 264	Re: Do you see anything wrong [QUOTE=joe231;3404719] one of these things are not like the others what kind of manifolds are you gonna run? on all my small blocks, the p/s belt ran around the water pump, don't see what it would hurt, they all turn the same speed, the more belt to pulley contact you have the better IMO what is the black bracket sticking up over the driver's side valve cover?[/QUOT I'm using hedders... That's what I was thinking as far as pulley arrangment, both belts using fan pulley. That black bracket above drivers side valve cover is a "pull' point for chain.. Thanks all for the help.. Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.