Can someone tell me what year this is? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dortoh · 07-10-2009, 12:42 AM

I found this on Craigslist and was wondering if its worth picking up? They are asking $400 OBO Don't know what year it is? The ad says it needs a motor and transmission. Would utility or bucket seats have been standard equipment in it? Since that is what I was searching for when I found it.

Thanks Lenard

10pointgmc · 07-10-2009, 12:45 AM

its a 68

mas09ts · 07-10-2009, 12:46 AM

68

BossHogg69 · 07-10-2009, 12:47 AM

looking at the slant front and the side markers, it's a '68. not sure about the seats, i don't know much about burb's. If it has buckets, I do believe they would be the utility buckets, but I have no clue what came as 'standard' equipment. i'm sure someone else will chime in here!

Longhorn Man · 07-10-2009, 05:16 AM

68 panel... not burb

PanelDeland · 07-10-2009, 07:17 AM

If the seats are stock they are the utility buckets.The passenger seat was an option but i have never seen a Panel without one.It will have a flip and fold base.If the lower parts of the body are not too bad it is well worth $400.00 but then I'm biased.If the VIN starts with a K it will be very rare.I can't tell from the pics but there were less than 100 K Panels built throughout the 67-72 model years.

big blue 72 · 07-10-2009, 08:57 AM

it is a panel and they are getting more rare every year.
Buy it!

dortoh · 07-10-2009, 12:35 PM

The owner finally got back to me. It doesn't have original seats they have been replaced with buckets out of a blazer. No motor or transmission. How much is to much to offer? I'm not that interested in it but would hate to see it go to the crusher.

Here is the text from the ad:

Great project vehicle! We just don't have the time for it! Needs motor, tranny and a few other things. If you have the time and the will power to make it a really nice truck, then this is for you! We are asking $400 OBO!! Make me an offer that I cant refuse!!!

**John Fabris** · 07-10-2009, 12:41 PM

at $400 that would already be on my trailer PERIOD!!!

**raggedjim** · 07-10-2009, 12:47 PM

Quote:

Originally Posted by John Fabris

at $400 that would already be on my trailer PERIOD!!!

I agree, and those are probably REALLY hard to find in Alaska. The make an offer makes me think you should start at $250-$300.

Rg

pritch · 07-10-2009, 10:31 PM

Save the Panels!

07-10-2009, 12:42 AM	#1
dortoh Registered User Join Date: Jun 2009 Location: Palmer Alaska Posts: 8	Can someone tell me what year this is? I found this on Craigslist and was wondering if its worth picking up? They are asking $400 OBO Don't know what year it is? The ad says it needs a motor and transmission. Would utility or bucket seats have been standard equipment in it? Since that is what I was searching for when I found it. Thanks Lenard

07-10-2009, 12:45 AM	#2
10pointgmc Registered User Join Date: Dec 2008 Location: Moores Hill Indiana Posts: 144	Re: Can someone tell me what year this is? its a 68

07-10-2009, 12:46 AM	#3
mas09ts Registered User Join Date: Jul 2008 Location: Gate City VA Posts: 576	Re: Can someone tell me what year this is? 68 __________________ Mitch 22yrs. Young 1970 GMC Short-Step 350/TH350 Combo. . . . Sold Dec 2011 Current Project 68 Gmc "Second Chance" Go to my 68 GMC Shorty Rebuild Thread http://67-72chevytrucks.com/vboard/s...39#post6341739 Last edited by mas09ts; 07-10-2009 at 12:47 AM. Reason: goofed up

07-10-2009, 12:47 AM	#4
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Can someone tell me what year this is? looking at the slant front and the side markers, it's a '68. not sure about the seats, i don't know much about burb's. If it has buckets, I do believe they would be the utility buckets, but I have no clue what came as 'standard' equipment. i'm sure someone else will chime in here! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

07-10-2009, 05:16 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Can someone tell me what year this is? 68 panel... not burb

07-10-2009, 07:17 AM	#6
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Can someone tell me what year this is? If the seats are stock they are the utility buckets.The passenger seat was an option but i have never seen a Panel without one.It will have a flip and fold base.If the lower parts of the body are not too bad it is well worth $400.00 but then I'm biased.If the VIN starts with a K it will be very rare.I can't tell from the pics but there were less than 100 K Panels built throughout the 67-72 model years. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

07-10-2009, 08:57 AM	#7
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Re: Can someone tell me what year this is? it is a panel and they are getting more rare every year. Buy it! __________________ Broken Back Club 72 Club GMC Club Panel truck Club 6 cylinder Club Unfinished Projects Club Outdoor Sportsmens Club

07-10-2009, 12:35 PM	#8
dortoh Registered User Join Date: Jun 2009 Location: Palmer Alaska Posts: 8	Re: Can someone tell me what year this is? The owner finally got back to me. It doesn't have original seats they have been replaced with buckets out of a blazer. No motor or transmission. How much is to much to offer? I'm not that interested in it but would hate to see it go to the crusher. Here is the text from the ad: Great project vehicle! We just don't have the time for it! Needs motor, tranny and a few other things. If you have the time and the will power to make it a really nice truck, then this is for you! We are asking $400 OBO!! Make me an offer that I cant refuse!!!

07-10-2009, 12:41 PM	#9
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Can someone tell me what year this is? at $400 that would already be on my trailer PERIOD!!! __________________ John Fabris 67 C10 SWB

07-10-2009, 10:31 PM	#11
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Can someone tell me what year this is? Save the Panels! __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.