instrument cluster question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

casey · 03-29-2003, 08:45 PM

I need to know what I would expect to pay for a new instrument cluster, with tach and vacuum guage, new lens and new chrome bezel, I might have a chance at getting one, the guy says make me a offer, I want to be fair with him, but at the same time I don't want to get ripped off. the whole cluster is completely redone, please state US$ or canadian$ thanks guys

hughnews1 · 03-29-2003, 08:49 PM

check EBAY i see them all the time.. TAch and vac might be $$$ good luck

Dreaminator · 03-29-2003, 09:00 PM

check comparables. Ebay, LMC catalog, GMC Paul or Tim Christian are good places to consider. If it is as you describe I would expect it to be pricey.

Blue Beard · 03-29-2003, 11:02 PM

Most of the ones I've seen are $350 plus side.............

casey · 03-31-2003, 02:48 AM

Turns out he wants 600 firm and he rebuilt it himself, the printed circuit was patched up not new, and he painted the needs with a brush, don't get me wrong it did look really nice, but its not all new, so 600 seemed a little steep to me, I might take on the challenge of doing one my self, half the fun is finding the parts, and you meet a lot of nice people along the way, finding good parts for theses trucks is like treasure hunting isn't it?

cheyenneman · 03-31-2003, 03:47 AM

Go over to Early classic enterprises site. Click on the new products page and at the bottom they have complete gauge clusters. The one with tach and vac. runs for 599.00. They are all new and look great. They are a great company to deal with also.

MOTHERTRUCKERS · 03-31-2003, 08:37 AM

New tach/vac gauge panel assembled complete for 69-72 or 67-68 is now in our catalog if interested, we also have a tach/vac conversion kit. I am upgrading our catalog daily and hope to have a printed catalog soon. All parts are still 100% money back including shipping, no restocking fee or hidden charges.

Ackattack · 03-31-2003, 02:35 PM

or you could go custom. I did mine with autometer ultra lite. It didn't cost that much, and I like it better than the stockers (especially that huge 5" fuel guage)

03-29-2003, 08:45 PM	#1
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	instrument cluster price I need to know what I would expect to pay for a new instrument cluster, with tach and vacuum guage, new lens and new chrome bezel, I might have a chance at getting one, the guy says make me a offer, I want to be fair with him, but at the same time I don't want to get ripped off. the whole cluster is completely redone, please state US$ or canadian$ thanks guys Last edited by casey; 03-29-2003 at 10:02 PM.

03-29-2003, 09:00 PM	#3
Dreaminator Dreaminator Join Date: Feb 2003 Location: Broken Arrow, Oklahoma Posts: 156	check comparables. Ebay, LMC catalog, GMC Paul or Tim Christian are good places to consider. If it is as you describe I would expect it to be pricey. __________________ The Dreaminator Daily Driver 1971 Cheyenne 10 Lwb Tilt/Tac 402 .030 TH400.

03-29-2003, 11:02 PM	#4
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Most of the ones I've seen are $350 plus side............. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

03-31-2003, 08:37 AM	#7
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	New tach/vac gauge panel assembled complete for 69-72 or 67-68 is now in our catalog if interested, we also have a tach/vac conversion kit. I am upgrading our catalog daily and hope to have a printed catalog soon. All parts are still 100% money back including shipping, no restocking fee or hidden charges. __________________ Rest in Peace Ed. Thanks for all the good times.

03-31-2003, 02:35 PM	#8
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	or you could go custom. I did mine with autometer ultra lite. It didn't cost that much, and I like it better than the stockers (especially that huge 5" fuel guage) __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

03-29-2003, 08:49 PM	#2
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	check EBAY i see them all the time.. TAch and vac might be $$$ good luck

03-31-2003, 02:48 AM	#5
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	Turns out he wants 600 firm and he rebuilt it himself, the printed circuit was patched up not new, and he painted the needs with a brush, don't get me wrong it did look really nice, but its not all new, so 600 seemed a little steep to me, I might take on the challenge of doing one my self, half the fun is finding the parts, and you meet a lot of nice people along the way, finding good parts for theses trucks is like treasure hunting isn't it?

03-31-2003, 03:47 AM	#6
cheyenneman Registered User Join Date: Mar 2003 Location: Spokane WA. Posts: 53	Go over to Early classic enterprises site. Click on the new products page and at the bottom they have complete gauge clusters. The one with tach and vac. runs for 599.00. They are all new and look great. They are a great company to deal with also.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.