To bag or not to bag...Help - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Naterman35 · 06-23-2009, 10:17 PM

Quote:

Originally Posted by MTCHEVY

Airlift Dominator D2600 for all four...I kicked around RE7's I couldn’t find anyone saying anything bad about either bag...so I went with the cheapest ones

same bags i bought... I habve just heard the doms have more lift and compress more.

MTCHEVY · 06-24-2009, 10:35 AM

Quote:

Originally Posted by Naterman35

same bags i bought... I habve just heard the doms have more lift and compress more.

Sweet! I stopped by your build thread, can't wait to see more pics!!!

MTCHEVY · 07-09-2009, 05:28 PM

Finally got all my parts together, should be able to get started really soon. Just want to mention that I am really impressed with the quality of parts from ECE and Suicide Doors. The bag plates & drop spindles are way clean, and the D2600’s are beefy!

So I am trying to decide if I should continue with this thread or start a new one that has all my truck updates in one spot?

VA72C10 · 07-09-2009, 05:30 PM

Start a new one in the projects and builds category and post a link here when you get it set up. If not, a mod will move it anyways

Naterman35 · 07-09-2009, 10:46 PM

I know them bags are hogs.... what size line you doin?

are you gonna put the rears on the trailing arm like the springs or gonna mod all that?

MTCHEVY · 07-12-2009, 07:07 PM

3/8" line, rear bags mounted in the stock sping location. Possibly a small frame notch, but not sure.

**kev2809** · 07-12-2009, 09:20 PM

could you lay frame putting them in the stock spring location with a monster notch? just curious...

Naterman35 · 07-12-2009, 09:43 PM

theirs cross member problems. out back i don't think so unless theirs lowering blocks and after that im still pretty sure no. I believe you would have to ditch the trailing arms and go for a 4 link or 3 link.

Up front you need a drop member or Z the frame and use spindles and such. Its quite a bit more extensive then putting them in the stock location. With out a notch frame laying on the rear axle its still like 8 inches off the ground or something like that but the bag will only compress another inch inch and a half or so i believe for me. so theres still in the neighborhood of 6 inches there. drop blocks could get you 2" inches closer. but still...that's 4 inches.

Naterman35 · 07-12-2009, 09:45 PM

Quote:

Originally Posted by MTCHEVY

3/8" line, rear bags mounted in the stock sping location. Possibly a small frame notch, but not sure.

FYI- BUY STEP DRILL BITS. you'll love them.

07-09-2009, 05:28 PM	#28
MTCHEVY Registered User Join Date: Mar 2009 Location: Missoula, MT Posts: 58	Re: To bag or not to bag...Help Finally got all my parts together, should be able to get started really soon. Just want to mention that I am really impressed with the quality of parts from ECE and Suicide Doors. The bag plates & drop spindles are way clean, and the D2600’s are beefy! So I am trying to decide if I should continue with this thread or start a new one that has all my truck updates in one spot? Attached Images __________________ -M.J. 1968 Stepside

07-09-2009, 05:30 PM	#29
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: To bag or not to bag...Help Start a new one in the projects and builds category and post a link here when you get it set up. If not, a mod will move it anyways __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-09-2009, 10:46 PM	#30
Naterman35 Registered User Join Date: Aug 2008 Location: Saginaw Michigan Posts: 199	Re: To bag or not to bag...Help I know them bags are hogs.... what size line you doin? are you gonna put the rears on the trailing arm like the springs or gonna mod all that?

07-12-2009, 07:07 PM	#31
MTCHEVY Registered User Join Date: Mar 2009 Location: Missoula, MT Posts: 58	Re: To bag or not to bag...Help 3/8" line, rear bags mounted in the stock sping location. Possibly a small frame notch, but not sure. __________________ -M.J. 1968 Stepside

07-12-2009, 09:20 PM	#32
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,144	Re: To bag or not to bag...Help could you lay frame putting them in the stock spring location with a monster notch? just curious...

07-12-2009, 09:43 PM	#33
Naterman35 Registered User Join Date: Aug 2008 Location: Saginaw Michigan Posts: 199	Re: To bag or not to bag...Help theirs cross member problems. out back i don't think so unless theirs lowering blocks and after that im still pretty sure no. I believe you would have to ditch the trailing arms and go for a 4 link or 3 link. Up front you need a drop member or Z the frame and use spindles and such. Its quite a bit more extensive then putting them in the stock location. With out a notch frame laying on the rear axle its still like 8 inches off the ground or something like that but the bag will only compress another inch inch and a half or so i believe for me. so theres still in the neighborhood of 6 inches there. drop blocks could get you 2" inches closer. but still...that's 4 inches.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.