Short Cell Phone video of Al's 71c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big_al_71 · 07-21-2009, 08:27 PM

I taped a short video of my truck at idle and wanted to see if i could post it here. Hope you acan all see it...

YouTube - 71c10

SBC · 07-21-2009, 08:32 PM

bigbadjohn84 · 07-21-2009, 08:35 PM

sweet. what engine are you running in that thing? nice truck

big_al_71 · 07-21-2009, 08:41 PM

Quote:

Originally Posted by bigbadjohn84

sweet. what engine are you running in that thing? nice truck

Small block 400....see pict below...

Jim_PA · 07-21-2009, 08:53 PM

The phone mic isn't doing it much justice.

big_al_71 · 07-21-2009, 08:57 PM

Quote:

Originally Posted by Jim_PA

The phone mic isn't doing it much justice.

yeah I agree .....I am doing a full video of it in the next few days with my video camera ...

bigbadjohn84 · 07-21-2009, 09:05 PM

thats sick man

nicolas72gmc · 07-23-2009, 02:36 AM

Hey Al, loving the skunk!!!!

Wilson_ · 07-23-2009, 02:46 AM

so when I visit do i get to drive it or ride in it LOL

Jacfourteen · 07-23-2009, 02:56 AM

What cam is in it? My 350 has a comp cams 268 and it idles about the same (gotta love a lopey idle). I have a cell phone vid I was gonna post a few weeks ago but it won't upload right

. Great looking and sounding truck!

big_al_71 · 07-23-2009, 06:27 AM

Quote:

Originally Posted by bigbadjohn84

thats sick man

Thank you!!!!!

Quote:

Originally Posted by nicolas72gmc

Hey Al, loving the skunk!!!!

Nick you remember the buckets name!!!!!
thanks!!

Quote:

Originally Posted by Wilson_

so when I visit do i get to drive it or ride in it LOL

Bobbie of course you can do both!!!!!

big_al_71 · 07-23-2009, 06:37 AM

Quote:

Originally Posted by Jacfourteen

What cam is in it? My 350 has a comp cams 268 and it idles about the same (gotta love a lopey idle). I have a cell phone vid I was gonna post a few weeks ago but it won't upload right

. Great looking and sounding truck!

Thank you for your compliments!!!!!

These are the exact details of the camshaft and lifter kit I used...

7102 - Edelbrock Performer RPM Camshaft Kit Details
SB-Chevy 283-400

Operating Range 1500-6500 RPM
Duration Advertised 308° Intake/318° Exhaust
Duration @ .050'' 234° Intake/244° Exhaust
Lift @ Valve .488'' Intake/.510'' Exhaust
Lift @ Cam .325'' Intake/.340'' Exhaust
Lobe Separation Angle 112°
Intake Centerline 107°
Intake Timing @ .050" Open 10° BTDC
Close 44° ABDC
Exhaust Timing @ .050" Open 59° BBDC
Close 5° ATDC

in person it sounds "EXTREMELY" bad ass and it runs awesome.....

northern 85 · 07-23-2009, 07:06 AM

Sounds like it loves to smoke tires! VERY NICE!!!!

68C10withA396 · 07-23-2009, 07:13 AM

I can't get on you tube on the work computer but it doesn't matter after seeing the picture of the motor. That thing is freakin' SWEET! I think i need to change my shorts now....

big_al_71 · 07-23-2009, 07:18 AM

Quote:

Originally Posted by northern 85

Sounds like it loves to smoke tires! VERY NICE!!!!

damn thing is just out of control if you are not paying attention it breaks the tires loose at 20,25,30,35,40,45mph....thanks

Quote:

Originally Posted by 68C10withA396

I can't get on you tube on the work computer but it doesn't matter after seeing the picture of the motor. That thing is freakin' SWEET! I think i need to change my shorts now....

that was funny!!!
thank you

72BlckButy · 07-23-2009, 08:07 AM

Al, that thing sounds good! I miss my '72 with the 400SB.

Can't wait to see it 4/6...

BTW, I might have you help me with posting a video.

C20-67_N_MO · 07-23-2009, 08:26 AM

Very sweet looking truck!

Heck I wish I had a SBC while my engine is out of the engine bay!

purewhitemp5 · 07-23-2009, 01:11 PM

What compression ratio are you running ?

big_al_71 · 07-23-2009, 02:09 PM

Quote:

Originally Posted by 72BlckButy

Al, that thing sounds good! I miss my '72 with the 400SB.

Can't wait to see it 4/6...

BTW, I might have you help me with posting a video.

I will be happy to Nate!!!!
Thanks

Quote:

Originally Posted by C20-67_N_MO

Very sweet looking truck!

Heck I wish I had a SBC while my engine is out of the engine bay!

you could buy mine

Quote:

Originally Posted by purewhitemp5

What compression ratio are you running ?

It is 9.5 to 1.......

BossHogg69 · 07-23-2009, 02:42 PM

i can't see the video at work either, but judging by those cam specs, I bet she thumps pretty hard!

big_al_71 · 07-23-2009, 02:53 PM

Quote:

Originally Posted by BossHogg69

i can't see the video at work either, but judging by those cam specs, I bet she thumps pretty hard!

Yeah it does sound very loppy!!!!!

07-21-2009, 08:32 PM	#2
SBC Registered User Join Date: Apr 2009 Location: Sacramento, CA Posts: 202	Re: Short Cell Phone video of Al's 71c10 __________________ 1967 C-10 Project 2008 Suburban 2017 GMC Sierra

07-21-2009, 08:35 PM	#3
bigbadjohn84 Registered User Join Date: Feb 2008 Location: Florala, AL Posts: 398	Re: Short Cell Phone video of Al's 71c10 sweet. what engine are you running in that thing? nice truck

07-21-2009, 08:53 PM	#5
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Short Cell Phone video of Al's 71c10 The phone mic isn't doing it much justice.

07-21-2009, 09:05 PM	#7
bigbadjohn84 Registered User Join Date: Feb 2008 Location: Florala, AL Posts: 398	Re: Short Cell Phone video of Al's 71c10 thats sick man

07-23-2009, 02:36 AM	#8
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: Short Cell Phone video of Al's 71c10 Hey Al, loving the skunk!!!! __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350

07-23-2009, 02:46 AM	#9
Wilson_ Registered User Join Date: Sep 2008 Location: Santa Rosa, CA Posts: 451	Re: Short Cell Phone video of Al's 71c10 so when I visit do i get to drive it or ride in it LOL __________________ Northern California Group Met list: Cyclone, KCJones, TranzAm, extd56, hotrodhomi, mnky30, Rokcrln, Brad, JerryJones, Petey-pablo, 72Subby Last edited by Wilson_; 07-23-2009 at 02:46 AM.

07-23-2009, 02:56 AM	#10
Jacfourteen Big Red - Now its a SWB! Join Date: Jun 2009 Location: Oroville, Ca Posts: 1,624	Re: Short Cell Phone video of Al's 71c10 What cam is in it? My 350 has a comp cams 268 and it idles about the same (gotta love a lopey idle). I have a cell phone vid I was gonna post a few weeks ago but it won't upload right. Great looking and sounding truck! __________________ 68 3/4 ton (Project)-350 Small Block, .030 over, 10:1 comp, 3998993 heads, C3BX edelbrock intake, comp cams XE268, Holley 670 SA, long tube headers, dual flow 40's, E-fan, Alum rad, currently under the knife getting shortened and bagged build thread 41 3/4 ton (wife's)-flatbed, fully restored to original 01 Tahoe LT 4WD (my daily driver)-Magnaflow Muffler, Rollin on 22's 02 Ford Mustang Convertable (Wife's Car)-Flowmaster 50, Clear corners, Intake, sittin on 18's

07-23-2009, 07:06 AM	#13
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Short Cell Phone video of Al's 71c10 Sounds like it loves to smoke tires! VERY NICE!!!!

07-23-2009, 07:13 AM	#14
68C10withA396 Registered User Join Date: Jun 2009 Location: Jacksonville N.C. Posts: 58	Re: Short Cell Phone video of Al's 71c10 I can't get on you tube on the work computer but it doesn't matter after seeing the picture of the motor. That thing is freakin' SWEET! I think i need to change my shorts now.... __________________ "Some people spend an entire life time wondering if they ever made a difference... The Marines don't have that problem." President Ronald Reagan '68 C10 SWB 396/350/4.11

07-23-2009, 08:07 AM	#16
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Short Cell Phone video of Al's 71c10 Al, that thing sounds good! I miss my '72 with the 400SB. Can't wait to see it 4/6... BTW, I might have you help me with posting a video. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 07-23-2009 at 08:07 AM.

07-23-2009, 08:26 AM	#17
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Short Cell Phone video of Al's 71c10 Very sweet looking truck! Heck I wish I had a SBC while my engine is out of the engine bay! __________________ Coming Soon: Project 1970 Country Truck

07-23-2009, 01:11 PM	#18
purewhitemp5 Registered User Join Date: Jun 2009 Location: Bear Delaware Posts: 72	Re: Short Cell Phone video of Al's 71c10 What compression ratio are you running ?

07-23-2009, 02:42 PM	#20
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Short Cell Phone video of Al's 71c10 i can't see the video at work either, but judging by those cam specs, I bet she thumps pretty hard! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.