Most of a 69 LWB and other stuff 350 TPI etc.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JesseSimon · 07-19-2009, 06:12 PM

Tons of stuff to sell, Im in NW Arkansas. I can get good deals on shipping through my work. Willing to negotiate, especially on multiple items...pictures are on the photobucket here. If you need to see more of anything specific just let me know...

From the 69:
*Front fenders -drivers side is exc. passenger side needs some work but its decent overall $100 pair SOLD
*Radiator support - excellent condition $75 SOLD PENDING PAYMENT
*inner fenders - pass. side exc, drivers side has dents but is solid as far as rust goes...$75 pair SOLD
*Non A/C cab - Has lots of rust issues, could use for some patchwork. There is a random tach hanging out in there $50, there is no glass
*Hood - excellent shape, needs a little filler on top. Someone had filled a dent but did it badly. I sanded it down but never refilled it....$100
*Hood latch - $10 SOLD
*Hood Springs - exc shape $40 pair
*Front suspension - will unbolt whole crossmember from frame. 6 lug, drum brakes. $100
*Complete driveline - $50
*Rearend - 6 lug, coil suspension dont know ratio $100
*Cowl cover - with or without junky antenna $20
*Bed - long bed, floor is okay not great, driver side needs work, passenger side is exc. rear section is great, no tailgate $150 whole bed, will part out if needed SOLD PENDING PICKUP
*front chrome bumper - beat up but not bent out of shape or nothing, useable $30
*rear step bumper - ugly, but works if needed...$20
*pile of A/C and Heater parts from (2) seperate trucks, $50 for all.
*Non-tilt steering column and steering wheel - aftermarket steering wheel, column in great shape except for shift indicator broken $75
*Gas tank - w/cap and sender excellent shape $50

Other parts-

*350 TPI Tuned Port Injection motor - rebuilder, ran when pulled but 180K on it. Has been partially disassembled. Turns, is not locked up. All of the injection parts are there. Only part missing is an exhaust manifold but the one that houses the O2 sensor is there. Comes with the ECU from the Firebird it came out of and most if not all harness clips. Power steering pump and some A/C parts and pulleys from the firebird. Some of the pulleys are bent $300

*700R4 transmission from the same Firebird, works fine but again 180K miles, torque converter included $150

*(2)TH400 transmissions - one I got in trade, supossed to be working but Ive never tested, the other got water logged, needs rebuild. Torque converters included..$150 for both

*front suspension from an early 80's chevy van, a-arms, spindles, disc brakes...good for disc brake conversion $100

Field and Son · 07-19-2009, 06:39 PM

I will take the radiator support if not rusted through anywhere. Any cheap way to get it to my parents in Mountain Home, Ark?

JesseSimon · 07-19-2009, 06:52 PM

No rust at all. Monday morning when I get in to work I will check on the shipping. I get great rates through UPS so I'll let you know what it will cost. Until then you've got first dibs on it....PM me their address so I can check the shipping cost

Field and Son · 07-19-2009, 08:31 PM

PM sent with shipping info for Radiator Support...Thanks!

spatz · 07-19-2009, 09:49 PM

I am interested in the bed. I know shipping is out of the question, so I would have to pick it up, please hold temporarily while i check things out, and get back to you tomorrow.
thanks

Southern C10 · 07-20-2009, 12:42 AM

How much for the following shipped to 35904?

Tailgate, Hood, Both inner and outer fenders, cowl, hood latch, all A/C stuff, windsheild and back glass, seat belts.

My uncle needs these for his truck.

Thanks,

Brian.

JesseSimon · 07-20-2009, 07:19 AM

Southern C-10, send me a PM with your shipping info so i can get you a price.

JesseSimon · 07-20-2009, 07:20 AM

SPATZ, you got dibs on the bed till I hear back from you

JesseSimon · 07-20-2009, 07:48 AM

Sorry Southern, just noticed you posted your ZIP....let me look into the cost of shipping, I'll PM you

spatz · 07-20-2009, 11:50 AM

Quote:

Originally Posted by JesseSimon

SPATZ, you got dibs on the bed till I hear back from you

Well Im going to have to pass on the bed, don't want to but I can't get away for a couple of months and don't have a way of hauling it home right now. thanks anyways

JesseSimon · 07-20-2009, 11:59 AM

no worries SPATZ

Bed still up for grabs........

TomsCheyenne · 07-20-2009, 12:37 PM

I'd like to get in line for the 2 front inner fenders, shipped to Maine, if the guy above decides he doesn't want them. Thanks.

JesseSimon · 07-20-2009, 01:17 PM

tom you've got next

Southern C10 · 07-21-2009, 12:37 AM

PM sent, Thanks.

68chevyboy · 07-21-2009, 08:43 PM

would you be willing to take $100 for the bed if so i will take it

luvmybowtiz · 07-21-2009, 09:25 PM

If the others back out on the inner and outer fenders, I'm very much interested. Be shipped to 34972.

JesseSimon · 07-22-2009, 07:32 AM

Chevyboy, If you come get it I'll take $100

JesseSimon · 07-24-2009, 08:06 AM

Bunch of stuff has sold....make me an offer guys, I need the money and I need the space!

07-19-2009, 06:12 PM	#1
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Most of a 69 LWB and other stuff 350 TPI etc.. Tons of stuff to sell, Im in NW Arkansas. I can get good deals on shipping through my work. Willing to negotiate, especially on multiple items...pictures are on the photobucket here. If you need to see more of anything specific just let me know... From the 69: Front fenders -drivers side is exc. passenger side needs some work but its decent overall $100 pair SOLD Radiator support - excellent condition $75 SOLD PENDING PAYMENT inner fenders - pass. side exc, drivers side has dents but is solid as far as rust goes...$75 pair SOLD Non A/C cab - Has lots of rust issues, could use for some patchwork. There is a random tach hanging out in there $50, there is no glass Hood - excellent shape, needs a little filler on top. Someone had filled a dent but did it badly. I sanded it down but never refilled it....$100 Hood latch - $10 SOLD Hood Springs - exc shape $40 pair Front suspension - will unbolt whole crossmember from frame. 6 lug, drum brakes. $100 Complete driveline - $50 Rearend - 6 lug, coil suspension dont know ratio $100 Cowl cover - with or without junky antenna $20 Bed - long bed, floor is okay not great, driver side needs work, passenger side is exc. rear section is great, no tailgate $150 whole bed, will part out if needed SOLD PENDING PICKUP front chrome bumper - beat up but not bent out of shape or nothing, useable $30 rear step bumper - ugly, but works if needed...$20 pile of A/C and Heater parts from (2) seperate trucks, $50 for all. Non-tilt steering column and steering wheel - aftermarket steering wheel, column in great shape except for shift indicator broken $75 Gas tank - w/cap and sender excellent shape $50 Other parts- 350 TPI Tuned Port Injection motor - rebuilder, ran when pulled but 180K on it. Has been partially disassembled. Turns, is not locked up. All of the injection parts are there. Only part missing is an exhaust manifold but the one that houses the O2 sensor is there. Comes with the ECU from the Firebird it came out of and most if not all harness clips. Power steering pump and some A/C parts and pulleys from the firebird. Some of the pulleys are bent $300 700R4 transmission from the same Firebird, works fine but again 180K miles, torque converter included $150 (2)TH400 transmissions - one I got in trade, supossed to be working but Ive never tested, the other got water logged, needs rebuild. Torque converters included..$150 for both front suspension from an early 80's chevy van, a-arms, spindles, disc brakes...good for disc brake conversion $100 __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride) Last edited by JesseSimon; 07-24-2009 at 08:06 AM. Reason: item sold*

07-19-2009, 06:39 PM	#2
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Most of a 69 LWB and other stuff 350 TPI etc.. I will take the radiator support if not rusted through anywhere. Any cheap way to get it to my parents in Mountain Home, Ark?

07-19-2009, 06:52 PM	#3
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Re: Most of a 69 LWB and other stuff 350 TPI etc.. No rust at all. Monday morning when I get in to work I will check on the shipping. I get great rates through UPS so I'll let you know what it will cost. Until then you've got first dibs on it....PM me their address so I can check the shipping cost __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride)

07-19-2009, 08:31 PM	#4
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Most of a 69 LWB and other stuff 350 TPI etc.. PM sent with shipping info for Radiator Support...Thanks!

07-19-2009, 09:49 PM	#5
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: Most of a 69 LWB and other stuff 350 TPI etc.. I am interested in the bed. I know shipping is out of the question, so I would have to pick it up, please hold temporarily while i check things out, and get back to you tomorrow. thanks

07-20-2009, 12:42 AM	#6
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: Most of a 69 LWB and other stuff 350 TPI etc.. How much for the following shipped to 35904? Tailgate, Hood, Both inner and outer fenders, cowl, hood latch, all A/C stuff, windsheild and back glass, seat belts. My uncle needs these for his truck. Thanks, Brian. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

07-20-2009, 07:19 AM	#7
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Re: Most of a 69 LWB and other stuff 350 TPI etc.. Southern C-10, send me a PM with your shipping info so i can get you a price. __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride)

07-20-2009, 07:20 AM	#8
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Re: Most of a 69 LWB and other stuff 350 TPI etc.. SPATZ, you got dibs on the bed till I hear back from you __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride)

07-20-2009, 07:48 AM	#9
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Re: Most of a 69 LWB and other stuff 350 TPI etc.. Sorry Southern, just noticed you posted your ZIP....let me look into the cost of shipping, I'll PM you __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride)

07-20-2009, 11:59 AM	#11
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Re: Most of a 69 LWB and other stuff 350 TPI etc.. no worries SPATZ Bed still up for grabs........ __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride)

07-20-2009, 12:37 PM	#12
TomsCheyenne Registered User Join Date: Jun 2009 Location: Mechanic Falls, Maine 04256 Posts: 62	Re: Most of a 69 LWB and other stuff 350 TPI etc.. I'd like to get in line for the 2 front inner fenders, shipped to Maine, if the guy above decides he doesn't want them. Thanks.

07-20-2009, 01:17 PM	#13
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Re: Most of a 69 LWB and other stuff 350 TPI etc.. tom you've got next __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride)

07-21-2009, 12:37 AM	#14
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: Most of a 69 LWB and other stuff 350 TPI etc.. PM sent, Thanks. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

07-21-2009, 08:43 PM	#15
68chevyboy Registered User Join Date: Dec 2008 Location: Aurora Missouri Posts: 57	Re: Most of a 69 LWB and other stuff 350 TPI etc.. would you be willing to take $100 for the bed if so i will take it

07-21-2009, 09:25 PM	#16
luvmybowtiz Registered User Join Date: Jul 2007 Location: Okeechobee, Florida Posts: 31	Re: Most of a 69 LWB and other stuff 350 TPI etc.. If the others back out on the inner and outer fenders, I'm very much interested. Be shipped to 34972.



Register or Log In To remove these advertisements.

07-22-2009, 07:32 AM	#17
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Re: Most of a 69 LWB and other stuff 350 TPI etc.. Chevyboy, If you come get it I'll take $100 __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride)

07-24-2009, 08:06 AM	#18
JesseSimon Asks alot of questions Join Date: Feb 2009 Location: Rogers, Arkansas Posts: 231	Re: Most of a 69 LWB and other stuff 350 TPI etc.. Bunch of stuff has sold....make me an offer guys, I need the money and I need the space! __________________ MY STABLE: '66 C10 LWB turning it into a shortbed stepside '77 LWB (my daily driver).....oh its a FORD ahhhhh! '07 MAZDA 3 (the wife's ride)

Register or Log In To remove these advertisements.