3" drop coils, trade for stock or 2" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cochino12 · 07-14-2009, 07:22 PM

3" ground force (summit) drop coils for your stock coils or 2" drop coils, no charge but you pay for shipping both directions. My coils have maybe 500 miles on them.

glock35ipsc · 07-14-2009, 07:31 PM

Did those that I brought down not work Adam?

cochino12 · 07-14-2009, 08:28 PM

Quote:

Originally Posted by glock35ipsc

Did those that I brought down not work Adam?

They would have worked great but I am a dumb @$$

. I got a new grinder the other day and was kind of impatient to use it so I cut off a coil before I pulled the 3 " coils out. Turns out the coils you gave me were 2" drop coils, so after the coil I cut off they are now 3" drop coils. Now I have 2 pairs of 3" drop coils ha ha . I r DUm

**crossy** · 07-14-2009, 09:02 PM

adam, I have a pair here that are new, but i don't know if they are 2 or 3" can you give me a measurrement on your 3". give me overall height and diameter of the wire itself not the coil diameter, thanx , crossy

cochino12 · 07-14-2009, 09:09 PM

Quote:

Originally Posted by crossy

adam, I have a pair here that are new, but i don't know if they are 2 or 3" can you give me a measurrement on your 3". give me overall height and diameter of the wire itself not the coil diameter, thanx , crossy

Crossy, the wire itself is 3/4" and the overall height standing it up on the small coil is 10.5"

**crossy** · 07-14-2009, 09:38 PM

mine measure basically the same , sorry thought i could help. at least now i know what i have.

thanx , crossy

glock35ipsc · 07-14-2009, 11:34 PM

Quote:

Originally Posted by cochino12

Turns out the coils you gave me were 2" drop coils,

Oh crap, if I had known that I would have kept them!

I was sure Alex told me they were stock height.

cochino12 · 07-14-2009, 11:38 PM

Quote:

Originally Posted by glock35ipsc

Oh crap, if I had known that I would have kept them!

I was sure Alex told me they were stock height.

That what I figured

, did you pull the coils from the burb yet? I'll meet you half way if you want to swap for my 3" coils. I want to get my blazer on the road so bad but my very small budget it going toward my crew cab right now so I dont want to have to pay any $$$

glock35ipsc · 07-14-2009, 11:43 PM

I haven't yet, debating on if I was going to or not. I need to keep it somewhat mobile so I can get rid of it easier.

cochino12 · 07-15-2009, 04:24 PM

No problem Bob, too bad I wasted those springs... I forgot to mail that burb title to you, I'll get it out in the morning.

Really? Nobody wants to swap me?

Driveway Dreams · 07-15-2009, 04:36 PM

You can have my stock ones. I pulled them out and know that they are stock!

Just call me and we will figure out when to get them. If your want to come up to Longmont I can take them to work one day. I may even consider going down another inch if I loose my mind (more than I have). So you could have my 2" at that point.

joebeetle · 07-21-2009, 11:15 AM

Hey cochino12, i might be able to swap you for my stock, but what year truck are these for? i have a 77 lwb. let me know.
Thanks,
Joe

justpball · 07-21-2009, 03:50 PM

do you still have them?

joe231 · 07-22-2009, 11:21 AM

you wanna sell the 3" springs?

ksbrktracer · 07-22-2009, 11:03 PM

I would also be interested in the 3" springs if for sale , if Joe doesnt want them........

joe231 · 07-23-2009, 12:09 AM

nah I would rather have some stockers, just looking around

joebeetle · 07-23-2009, 08:48 AM

um...... joe231 or joebeetle?!?! hahaha, yeah i'm still interested.

joe231 · 07-23-2009, 09:32 AM

I'm stepping out of line....down to one Joe

Driveway Dreams · 07-23-2009, 10:56 PM

Adam, it was good to meet up (once we finally found each other).

Glad to think that those ones will get the Blazer back on the road. I am still trying to figure out if the 2nd will work for us or not. But, I will let you know.

ksbrktracer · 07-24-2009, 07:44 AM

PM sent..........I would like to buy these if avaiable

cochino12 · 07-24-2009, 08:32 AM

Quote:

Originally Posted by Driveway Dreams

Adam, it was good to meet up (once we finally found each other).

Glad to think that those ones will get the Blazer back on the road. I am still trying to figure out if the 2nd will work for us or not. But, I will let you know.

Thanks again, I am so excited to get my blazer driveable again. I ended up with the day off today too!!! I'm going to pick up the new tires for my crew and cut a coil off those springs and then I'm going to try to swap springs in the Blazer and get the top pulled off. I hope I have enough time

Quote:

Originally Posted by ksbrktracer

PM sent..........I would like to buy these if avaiable

PM sent

justpball · 07-24-2009, 09:06 AM

I am so confused... is there any springs left?

ksbrktracer · 07-24-2009, 11:28 PM

Pay-Pal and a pm sent........you've got money....!!!!

joebeetle · 07-24-2009, 11:28 PM

yeah im confused too...

07-14-2009, 07:22 PM	#1
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	3" drop coils, trade for stock or 2" 3" ground force (summit) drop coils for your stock coils or 2" drop coils, no charge but you pay for shipping both directions. My coils have maybe 500 miles on them. __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

07-14-2009, 07:31 PM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: 3" drop coils, trade for stock or 2" Did those that I brought down not work Adam? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-14-2009, 09:02 PM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	Re: 3" drop coils, trade for stock or 2" adam, I have a pair here that are new, but i don't know if they are 2 or 3" can you give me a measurrement on your 3". give me overall height and diameter of the wire itself not the coil diameter, thanx , crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

07-14-2009, 09:38 PM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	Re: 3" drop coils, trade for stock or 2" mine measure basically the same , sorry thought i could help. at least now i know what i have. thanx , crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

07-14-2009, 11:43 PM	#9
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: 3" drop coils, trade for stock or 2" I haven't yet, debating on if I was going to or not. I need to keep it somewhat mobile so I can get rid of it easier. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-15-2009, 04:24 PM	#10
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: 3" drop coils, trade for stock or 2" No problem Bob, too bad I wasted those springs... I forgot to mail that burb title to you, I'll get it out in the morning. Really? Nobody wants to swap me? __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

07-15-2009, 04:36 PM	#11
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: 3" drop coils, trade for stock or 2" You can have my stock ones. I pulled them out and know that they are stock! Just call me and we will figure out when to get them. If your want to come up to Longmont I can take them to work one day. I may even consider going down another inch if I loose my mind (more than I have). So you could have my 2" at that point. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 07-15-2009 at 04:44 PM. Reason: call

07-21-2009, 11:15 AM	#12
joebeetle Registered User Join Date: Apr 2009 Location: Sallisaw, Ok Posts: 67	Re: 3" drop coils, trade for stock or 2" Hey cochino12, i might be able to swap you for my stock, but what year truck are these for? i have a 77 lwb. let me know. Thanks, Joe

07-21-2009, 03:50 PM	#13
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 3" drop coils, trade for stock or 2" do you still have them? __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

07-22-2009, 11:21 AM	#14
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 3" drop coils, trade for stock or 2" you wanna sell the 3" springs? __________________ *CHEVY ONLY*

07-22-2009, 11:03 PM	#15
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: 3" drop coils, trade for stock or 2" I would also be interested in the 3" springs if for sale , if Joe doesnt want them........

07-23-2009, 12:09 AM	#16
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 3" drop coils, trade for stock or 2" nah I would rather have some stockers, just looking around __________________ *CHEVY ONLY*

07-23-2009, 08:48 AM	#17
joebeetle Registered User Join Date: Apr 2009 Location: Sallisaw, Ok Posts: 67	Re: 3" drop coils, trade for stock or 2" um...... joe231 or joebeetle?!?! hahaha, yeah i'm still interested.

07-23-2009, 09:32 AM	#18
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 3" drop coils, trade for stock or 2" I'm stepping out of line....down to one Joe __________________ *CHEVY ONLY*

07-23-2009, 10:56 PM	#19
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: 3" drop coils, trade for stock or 2" Adam, it was good to meet up (once we finally found each other). Glad to think that those ones will get the Blazer back on the road. I am still trying to figure out if the 2nd will work for us or not. But, I will let you know. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.



Register or Log In To remove these advertisements.

07-24-2009, 07:44 AM	#20
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: 3" drop coils, trade for stock or 2" PM sent..........I would like to buy these if avaiable

07-24-2009, 09:06 AM	#22
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 3" drop coils, trade for stock or 2" I am so confused... is there any springs left? __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

07-24-2009, 11:28 PM	#23
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: 3" drop coils, trade for stock or 2" Pay-Pal and a pm sent........you've got money....!!!!

Register or Log In To remove these advertisements.