|
04-02-2003, 02:56 PM
|
#1 |
|
Registered User
Join Date: Oct 2002
Location: reno, nv
Posts: 50
|
vent windows
I just recently replaced my vent windows and am having trouble rolling up the window. once it gets about all but 3 inches from being all the up the window gets real hard to crank. Is there an adjustment that I am missing? The truck is a 67 and the vent windows came out of a 68 so I dont think that is the problem.Any help would be appreciated.
|
|
|
|
04-02-2003, 03:07 PM
|
#2 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
There are not any adjustments. I suspect that the felt runs on your replacement vent windows are in better shape and it put pressure onto the back felt. I would look at the junction of the lower rear run and the door to see if the felt is ok. It is hard to see but that is a problem area.
It seems as if your problem happens just as the window guide hits that area which would make the window about three inches from the top. Jim |
|
|
|
|
04-02-2003, 04:57 PM
|
#3 |
|
Registered User
Join Date: Oct 2002
Location: reno, nv
Posts: 50
|
Thanks for your help. I was just afraid to try and force the window up all the way. The felt is in better condition thn the old vent window.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
