'64 K-20 rolling chassis-complete - $300 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue'66 · 12-27-2002, 03:14 PM

I just bought this truck from a friend for the front clip for my '65 k-20. The cab had been removed, it was trash, truck has no bed. Frame is complete with both axles, D-44 front(closed knuckle) and HD Eaton rear end. Still has both bumpers. Set up for SBC. SM-420 trans and T-221 transfer case, all seem to work well. All springs and shackles look good, frame is in very good condition, better than the last one I sold. Has all e-brake cables and they look good and are working. No motor, but has bellhousing. 4 16.5 inch rims, non split rims. All 4 tires hold air. Will deliver within a 100 mile radius. $300.00 Dont want to part out.

truckman32 · 01-15-2003, 06:45 PM

is it short wheel base frame

Blue'66 · 01-16-2003, 09:43 AM

No, it is a long wheel base 3/4 ton 4x4 frame.

Blue'66 · 03-10-2003, 01:58 PM

Still For Sale!!

YankeeWhite · 03-10-2003, 04:25 PM

I wonder what a car hauler would charge to get that to Kansas?

**crossy** · 03-19-2003, 02:22 AM

yankee , mapquest says that is 1124 miles from him to you. I THINK? most reasonably priced private haulers charge .50 per mile one way. that would be roughly $600 . I know someone that just had one brought one 3000 miles for $1100. rates may be a little higher right now especially with diesel( most haulers use fuel oil burners ) being so high. It's tough to get away from anywhere on the East Coast without paying heavy tolls also. DAVE

66heavychevy · 04-01-2003, 03:17 PM

Do you still have the 64 K-20 rolling chassis. I am in Virginia and would like to slide a 4WD power train under my 66 Camper Special.

Blue'66 · 04-02-2003, 09:56 PM

Yes, the frame is still for sale. I want it gone soon!

12-27-2002, 03:14 PM	#1
Blue'66 Registered User Join Date: Dec 1999 Location: Akron, New York Posts: 379	'64 K-20 rolling chassis-complete - $300 I just bought this truck from a friend for the front clip for my '65 k-20. The cab had been removed, it was trash, truck has no bed. Frame is complete with both axles, D-44 front(closed knuckle) and HD Eaton rear end. Still has both bumpers. Set up for SBC. SM-420 trans and T-221 transfer case, all seem to work well. All springs and shackles look good, frame is in very good condition, better than the last one I sold. Has all e-brake cables and they look good and are working. No motor, but has bellhousing. 4 16.5 inch rims, non split rims. All 4 tires hold air. Will deliver within a 100 mile radius. $300.00 Dont want to part out. __________________ '48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks.

01-15-2003, 06:45 PM	#2
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	is it short wheel base frame __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

01-16-2003, 09:43 AM	#3
Blue'66 Registered User Join Date: Dec 1999 Location: Akron, New York Posts: 379	No, it is a long wheel base 3/4 ton 4x4 frame. __________________ '48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks.

03-10-2003, 01:58 PM	#4
Blue'66 Registered User Join Date: Dec 1999 Location: Akron, New York Posts: 379	Still For Sale!! __________________ '48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks.

03-19-2003, 02:22 AM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	yankee , mapquest says that is 1124 miles from him to you. I THINK? most reasonably priced private haulers charge .50 per mile one way. that would be roughly $600 . I know someone that just had one brought one 3000 miles for $1100. rates may be a little higher right now especially with diesel( most haulers use fuel oil burners ) being so high. It's tough to get away from anywhere on the East Coast without paying heavy tolls also. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

03-10-2003, 04:25 PM	#5
YankeeWhite Registered User Join Date: Jan 2002 Location: Manhattan KS USA Posts: 117	I wonder what a car hauler would charge to get that to Kansas?

04-01-2003, 03:17 PM	#7
66heavychevy Registered User Join Date: Apr 2003 Posts: 1	Do you still have the 64 K-20 rolling chassis. I am in Virginia and would like to slide a 4WD power train under my 66 Camper Special.

04-02-2003, 09:56 PM	#8
Blue'66 Registered User Join Date: Dec 1999 Location: Akron, New York Posts: 379	Yes, the frame is still for sale. I want it gone soon! __________________ '48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.