want 65 .. 230,6cyl exhaust manifold.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**yote1234** · 02-28-2003, 10:10 AM

want 1965 ..230 .. 6cyl exhaust manifold...must be very nice..also need mint ashtray...thanx,david

**yote1234** · 03-04-2003, 08:32 PM

anyone?

**yote1234** · 03-15-2003, 01:24 PM

i am still looking.....found one with 1 crack...but am still lookin for a better one......h e l p ... thanx,david

jill56 · 03-15-2003, 02:14 PM

I know where you can buy a complete engine & trans for your truck for $300.00 (runs good) Everything is there all the way
down to the distributer. You can put it in and go.jhensley1@adelphia.net

**yote1234** · 03-15-2003, 02:35 PM

thanx,but my engine/trans are great...but exhast manifold is cracked.....thanx,david

jill56 · 03-15-2003, 08:45 PM

I'll be lookin' around for you.

pugs · 03-16-2003, 02:30 PM

im going to look at a few trucks a guy i used to work w/ and i will see what else he has laying around amd i mite be getting in a 64 i believe sometime this week

NAPCO ken · 03-21-2003, 08:33 PM

I have an exhaust mani for a 230. Does it matter what year it is? Because I think mine is from a 1963. Let me know.

**yote1234** · 03-22-2003, 01:11 AM

not sure....does your intake bolt up to the exhaust manifold? my 65 does....and please tell me what condition it is in...thanx,david

NAPCO ken · 03-24-2003, 12:44 PM

Yes, my exhaust bolts to the intake. I believe it is the same as what you have.

**yote1234** · 03-24-2003, 03:54 PM

please send the part #....and what condition is it...? thanx.david

djtejas · 03-25-2003, 10:14 PM

the exhaust manifolds will be the same; 230,250,292...the crack is common though...it happened on my 64 truck and my 67 camaro also...

**yote1234** · 03-27-2003, 12:40 AM

are you sure all 230,250 & 292 fit? thanx,david

djtejas · 04-03-2003, 08:05 PM

still looking for that ashtray?...i don't have a need for mine because i am installing a/c...

**yote1234** · 04-03-2003, 10:24 PM

if its clean i will buy it...thanx,david

djtejas · 04-03-2003, 10:33 PM

i'll send a picture this weekend...

**yote1234** · 04-03-2003, 10:59 PM

t h a n x . . . david

02-28-2003, 10:10 AM	#1
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	want 65 .. 230,6cyl exhaust manifold.. want 1965 ..230 .. 6cyl exhaust manifold...must be very nice..also need mint ashtray...thanx,david

03-15-2003, 02:14 PM	#4
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	manifold I know where you can buy a complete engine & trans for your truck for $300.00 (runs good) Everything is there all the way down to the distributer. You can put it in and go.jhensley1@adelphia.net

03-15-2003, 02:35 PM	#5
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	thanx,but my engine/trans are great...but exhast manifold is cracked.....thanx,david __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

03-15-2003, 08:45 PM	#6
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	I'll be lookin' around for you. __________________ If it ain't broke don't fix it!!! 1956 SWB Small Window Cab 1997 Camaro RS 1972 Chevelle Malibu 1990 S-10 Blazer 4X4

03-16-2003, 02:30 PM	#7
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	im going to look at a few trucks a guy i used to work w/ and i will see what else he has laying around amd i mite be getting in a 64 i believe sometime this week __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

03-04-2003, 08:32 PM	#2
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	anyone?

03-15-2003, 01:24 PM	#3
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	i am still looking.....found one with 1 crack...but am still lookin for a better one......h e l p ... thanx,david

03-21-2003, 08:33 PM	#8
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	I have an exhaust mani for a 230. Does it matter what year it is? Because I think mine is from a 1963. Let me know. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

03-22-2003, 01:11 AM	#9
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	not sure....does your intake bolt up to the exhaust manifold? my 65 does....and please tell me what condition it is in...thanx,david

03-24-2003, 12:44 PM	#10
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	Yes, my exhaust bolts to the intake. I believe it is the same as what you have. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

03-24-2003, 03:54 PM	#11
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	please send the part #....and what condition is it...? thanx.david __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

03-25-2003, 10:14 PM	#12
djtejas Registered User Join Date: Mar 2003 Location: Boise, Idaho Posts: 20	the exhaust manifolds will be the same; 230,250,292...the crack is common though...it happened on my 64 truck and my 67 camaro also...

03-27-2003, 12:40 AM	#13
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	are you sure all 230,250 & 292 fit? thanx,david __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

04-03-2003, 08:05 PM	#14
djtejas Registered User Join Date: Mar 2003 Location: Boise, Idaho Posts: 20	still looking for that ashtray?...i don't have a need for mine because i am installing a/c...

04-03-2003, 10:24 PM	#15
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	if its clean i will buy it...thanx,david __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey



Register or Log In To remove these advertisements.

04-03-2003, 10:33 PM	#16
djtejas Registered User Join Date: Mar 2003 Location: Boise, Idaho Posts: 20	i'll send a picture this weekend...

04-03-2003, 10:59 PM	#17
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	t h a n x . . . david __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

Register or Log In To remove these advertisements.