Kansas salvage/bone yards - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972chevy4x4 · 03-10-2003, 01:50 AM

Does anyone know of any good parts yards out here with a few of our old trucks. Have been though nearly every salvage in the wichita area and the pickins are getting slim. Heard of an old chevy graveyard in kc area and one in northern oklahoma, is this true and does anybody know the names of them.

Beyond · 03-10-2003, 11:22 AM

Ray's Metal Depot (my brother in law) in La Harpe has a number of cabs and some sheet metal. Most of the trucks have been pretty well picked over. No burbs that I have seen. There's a number of smaller yards in SE Kansas, most have some of these trucks but would assume most have been picked over pretty good.

70cst10_05 · 03-10-2003, 06:19 PM

the one that i always go to is in wymore nebraska, since i only live 11 miles from the state line and it isn't very far from the stateline either its pretty easy, they have got quite the selection, i haven't been up there in a while, i probably will this summer though, the one around here locally won't let you just go wonder around, its crap.

gregsplace · 03-10-2003, 06:23 PM

Are you looking for anything in particular?? I have alot of 67-72 parts and I'm just 10 miles west of Wichita, Greg

Yellow Cheyenne · 03-10-2003, 06:51 PM

Don't know of yards in KS, but will keep your thread TTT. Gregsplace, I forgot how close you were to Wichita. I was in your neck of the woods last weekend. Went to a wedding in north Wichita and stayed with my brother in Cheney. Looked at a '71 in Goddard, right along 54. Very low rust, but kind of banged up everywhere. He was asking $4k for it. Maybe worth it if it wasn't so banged up, but I am guessing he will have a hard time selling it. Would have been nice to see all of your goodies. Maybe next time.

Randy

**68Custom** · 03-10-2003, 08:29 PM

Not much around the salina area

but you can go to abilene and a salvage yard called Sutton Salvage has plenty of them... they won't let you pick through but they might have what you are looking for!

Aaron

1972chevy4x4 · 03-10-2003, 09:53 PM

Thanks for all the info, greg you have pm. Thanks

O'l Buck · 03-11-2003, 03:47 AM

The only 2 I can think of are both north of Hays. The "good" one is a few miles off the highway. There is one a few miles north of town, but they mostly deal in late model stuff. I stopped in there looking for parts for my convertible, and they pointed me to this good old school boneyard a few miles west of them. There were several of our trucks in there when I was there a few years ago. I bet I wondered around that place for 3 hours. I can't remember the name of it though.

Fuzzy · 04-04-2003, 02:35 AM

Kenny Pfiefer Salvege in hays

03-10-2003, 01:50 AM	#1
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	Kansas salvage/bone yards Does anyone know of any good parts yards out here with a few of our old trucks. Have been though nearly every salvage in the wichita area and the pickins are getting slim. Heard of an old chevy graveyard in kc area and one in northern oklahoma, is this true and does anybody know the names of them. __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-10-2003, 11:22 AM	#2
Beyond Registered User Join Date: Feb 2002 Location: La Harpe, KS Posts: 68	Ray's Metal Depot (my brother in law) in La Harpe has a number of cabs and some sheet metal. Most of the trucks have been pretty well picked over. No burbs that I have seen. There's a number of smaller yards in SE Kansas, most have some of these trucks but would assume most have been picked over pretty good. __________________ 1972 C10 Daily Driver Project Truck 1971 Nova 9 second Tire Fryer 1988 Burb 1987 454 Dually Crew Cab

03-10-2003, 06:19 PM	#3
70cst10_05 Registered User Join Date: Dec 2002 Location: Summerfield, Ks Posts: 741	the one that i always go to is in wymore nebraska, since i only live 11 miles from the state line and it isn't very far from the stateline either its pretty easy, they have got quite the selection, i haven't been up there in a while, i probably will this summer though, the one around here locally won't let you just go wonder around, its crap. __________________ 1970 Chevy CST/10 1970 Chevy CST/10 1972 Chevy C/10 1972 Chevy Suburban K/10 2019 Silverado 2500 Duramax Kevin

03-10-2003, 06:23 PM	#4
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	Are you looking for anything in particular?? I have alot of 67-72 parts and I'm just 10 miles west of Wichita, Greg __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

03-10-2003, 06:51 PM	#5
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	Don't know of yards in KS, but will keep your thread TTT. Gregsplace, I forgot how close you were to Wichita. I was in your neck of the woods last weekend. Went to a wedding in north Wichita and stayed with my brother in Cheney. Looked at a '71 in Goddard, right along 54. Very low rust, but kind of banged up everywhere. He was asking $4k for it. Maybe worth it if it wasn't so banged up, but I am guessing he will have a hard time selling it. Would have been nice to see all of your goodies. Maybe next time. Randy __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350

03-10-2003, 08:29 PM	#6
68Custom Hammer On! Join Date: Jul 2001 Location: Olathe, KS Posts: 473	Not much around the salina area but you can go to abilene and a salvage yard called Sutton Salvage has plenty of them... they won't let you pick through but they might have what you are looking for! Aaron __________________ 1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed

03-10-2003, 09:53 PM	#7
1972chevy4x4 Registered User Join Date: Feb 2003 Location: Wichita Kansas Posts: 223	parts Thanks for all the info, greg you have pm. Thanks __________________ 1972 chevy k10 4x4 longbed 4-inch lift, 3.73 front/rears, frame off nearly complete 1972 chevy k10 4x4 longbed parts truck, known as the "ugly green machine" 1990 GMC 3/4 shortbed ext cab Always in need of 67-72 parts in central ks.

03-11-2003, 03:47 AM	#8
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	The only 2 I can think of are both north of Hays. The "good" one is a few miles off the highway. There is one a few miles north of town, but they mostly deal in late model stuff. I stopped in there looking for parts for my convertible, and they pointed me to this good old school boneyard a few miles west of them. There were several of our trucks in there when I was there a few years ago. I bet I wondered around that place for 3 hours. I can't remember the name of it though. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

04-04-2003, 02:35 AM	#9
Fuzzy Registered User Join Date: Mar 2003 Location: Hays, Kansas Posts: 14	Kenny Pfiefer Salvege in hays



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.