Help on ID'ing a few things on a 5.3L

[fxdxharley]

I just had mine all apart. would have to look at the manual for exact names. Do you have a manual? if not go get one. mine was a life saver.
the hose in pic 2 conects to the port withe the 2 white dots just to the right of your hand.
the sensor above the starter is the crank position sensor.
Thats all i can id right now with out going out and looking at mine and fliping threw the manual.

Originally Posted by glock35ipsc

Can anyone help me identify a few things on my 2006 5.3L?

#1 - Sensor on front of intake, right behind the TB:


#2 - The hose that runs from the sensor in #1 runs to the back of the engine on the drivers side and was disconnected from something. What is the hose suppose to plug in to? (end of hose is #1)


#3 - The vent hose on the transmission splits and runs toward the engine and ends with a check valve. the other end was loose. Any idea where that end with the "?" goes?


#4 - This sensor above the starter:


#5 - This module, looks as though it was on the inside of the cab:


#6 - This gizmo was tied around the negative battery cable near the battery terminal end, and ran straight to the PCM:




Thanks in advance for any help ID'ing this stuff!!!!

[glock35ipsc]

Originally Posted by fxdxharley

the hose in pic 2 conects to the port withe the 2 white dots just to the right of your hand.

OK, thanks. I though I disconnected wires from both of those, so I'll have to look again tonight.

No one makes a manual for a 5.3 Vortec in an 85 GMC.

[fxdxharley]

I will go out and check my truck and get back to ya. just to be sure.

[fxdxharley]

sorry man i was wrong. the tube is part of the evap system and connects to a metal tube that runs along with the fuel lines to the tank. so the sensor the tube goes to is some sort of vacum valve.
I took a bunch of pics with my digital during the taredown just incase i forgot where stuff went and labeled every plug i un did even tho most will only go in one place.

Originally Posted by glock35ipsc

OK, thanks. I though I disconnected wires from both of those, so I'll have to look again tonight.

No one makes a manual for a 5.3 Vortec in an 85 GMC.

[fxdxharley]

Well i guess you better get started then
get one for the yr of 5.3

Originally Posted by glock35ipsc

No one makes a manual for a 5.3 Vortec in an 85 GMC.