Rattle can hi-temp exhaust manifold paint? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OrrieG · 08-06-2009, 12:01 AM

I need to paint the exhaust manifolds (ram horns). The last Hi temp exhaust manifold paint I got did not dry completely until you ran the engine so it "melted" Until then it was a semi sticky powder.

Since it will be a while between paint and engine running with plenty of time to get the excess on everything else in the engine compartment is there a paint that drys but offers the heat resistance finish without the mess? How about toaster oven powder coating systems? Or regular engine paint and accept the fact that over time it will fade to the semi rust patina?? Thanks in advance.

Rack Man · 08-06-2009, 01:02 AM

Here dude...look no further...This stuff rocks!

http://www.eastwood.com/specialty-co...ting-1-pt.html

OrrieG · 08-06-2009, 12:03 PM

I had forgotten about that, I generally stay away from Eastwood stuff because it is expensive, but in this case you get what you pay for. Does it dry hard, not tacky? Thanks Patrick

Houston54 · 08-06-2009, 02:58 PM

I use the VHT brand header paint. You have to realize though that nothing short of a ceramic will last very long if it is driven regularly.

The VHT is available in cast iron tone also.

I am using it on some headers now.

54 jimmy · 08-06-2009, 05:09 PM

bbq grill paint 5 bucks a can satian black finish and half the price of the other stuff same temp rating too. i think 1200f.

OrrieG · 08-06-2009, 07:49 PM

Quote:

Originally Posted by Houston54

You have to realize though that nothing short of a ceramic will last very long if it is driven regularly.

My expectations for exhaust manifolds and pipes are low. I will drive the truck 6-8K per year, in all weather, off road, in the hills etc. I would like it to look nice when it is back together so I can show it off a little. In the future I might get some ceramic headers for it, for now money dictates a different course.

Thanks for all the responses.

bensimmons_05 · 08-07-2009, 12:13 PM

Most of the rattlecan high temp can be treated in an oven if you have one large enough and can get the wife to look the other way long enough... it actually provides more even curing anyway... read the back of the can on duplicolor and vht

Byrne66 · 08-11-2009, 05:23 PM

Cast Blast 1200 degree paint works well too. I have used it on a number of exhausts manifolds. It's a little cheaper around 10 bucks a can.

OrrieG · 08-11-2009, 05:28 PM

Thanks for the info..

**leddzepp** · 08-11-2009, 05:28 PM

POR 20 Hi Temp manifold paint. Have it on my daily driver for years. Still looks brand new. Brush it on, no mess.

Fred T · 08-12-2009, 09:54 PM

VHT is good paint. For any paint to stick the metal needs to be spotless. Glass bead or sand blasting, followed by a thorough wash.

Yukon Jack had the manifolds for his 69 powder coated a couple years ago. You might PM him and ask how it has held up.

OrrieG · 08-12-2009, 10:41 PM

I sand blasted the manifolds and will clean off the residue. Local body paint place has the POR stuff, I'll look at that. Thanks

08-06-2009, 12:01 AM	#1
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Rattle can hi-temp exhaust manifold paint? I need to paint the exhaust manifolds (ram horns). The last Hi temp exhaust manifold paint I got did not dry completely until you ran the engine so it "melted" Until then it was a semi sticky powder. Since it will be a while between paint and engine running with plenty of time to get the excess on everything else in the engine compartment is there a paint that drys but offers the heat resistance finish without the mess? How about toaster oven powder coating systems? Or regular engine paint and accept the fact that over time it will fade to the semi rust patina?? Thanks in advance. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

08-06-2009, 01:02 AM	#2
Rack Man Registered User Join Date: Sep 2008 Location: Tempe, AZ Posts: 770	Re: Rattle can hi-temp exhaust manifold paint? Here dude...look no further...This stuff rocks! http://www.eastwood.com/specialty-co...ting-1-pt.html __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288

08-06-2009, 12:03 PM	#3
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Rattle can hi-temp exhaust manifold paint? I had forgotten about that, I generally stay away from Eastwood stuff because it is expensive, but in this case you get what you pay for. Does it dry hard, not tacky? Thanks Patrick __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

08-06-2009, 02:58 PM	#4
Houston54 Registered User Join Date: Feb 2005 Location: location Posts: 527	Re: Rattle can hi-temp exhaust manifold paint? I use the VHT brand header paint. You have to realize though that nothing short of a ceramic will last very long if it is driven regularly. The VHT is available in cast iron tone also. I am using it on some headers now. Last edited by Houston54; 08-06-2009 at 02:59 PM. Reason: added color note

08-06-2009, 05:09 PM	#5
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,184	Re: Rattle can hi-temp exhaust manifold paint? bbq grill paint 5 bucks a can satian black finish and half the price of the other stuff same temp rating too. i think 1200f. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter) Last edited by 54 jimmy; 08-06-2009 at 05:10 PM.

08-07-2009, 12:13 PM	#7
bensimmons_05 Registered User Join Date: Dec 2007 Location: Jacksonville, AL Posts: 479	Re: Rattle can hi-temp exhaust manifold paint? Most of the rattlecan high temp can be treated in an oven if you have one large enough and can get the wife to look the other way long enough... it actually provides more even curing anyway... read the back of the can on duplicolor and vht __________________ ---Ben Jammin's 1955 Chevy/GMC Project --- ---The shop's live video feed--- <<< See what I'm up to!

08-11-2009, 05:23 PM	#8
Byrne66 Registered User Join Date: Jun 2009 Location: San Carlos Posts: 44	Re: Rattle can hi-temp exhaust manifold paint? Cast Blast 1200 degree paint works well too. I have used it on a number of exhausts manifolds. It's a little cheaper around 10 bucks a can.

08-11-2009, 05:28 PM	#9
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Rattle can hi-temp exhaust manifold paint? Thanks for the info.. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

08-11-2009, 05:28 PM	#10
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,036	Re: Rattle can hi-temp exhaust manifold paint? POR 20 Hi Temp manifold paint. Have it on my daily driver for years. Still looks brand new. Brush it on, no mess. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

08-12-2009, 09:54 PM	#11
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Rattle can hi-temp exhaust manifold paint? VHT is good paint. For any paint to stick the metal needs to be spotless. Glass bead or sand blasting, followed by a thorough wash. Yukon Jack had the manifolds for his 69 powder coated a couple years ago. You might PM him and ask how it has held up. __________________ Fred There is no such thing as too much cam...just not enough engine.

08-12-2009, 10:41 PM	#12
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Rattle can hi-temp exhaust manifold paint? I sand blasted the manifolds and will clean off the residue. Local body paint place has the POR stuff, I'll look at that. Thanks __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.