One piece drive shaft length? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wancosc356** · 08-11-2009, 07:12 PM

I picked up a one piece drive shaft that I believe to be out of a 67 swb. Just curious if someone could help me to verify that this is correct. I guess the only way to tell would be the length. Any one out there know what that is? Thanks
Michael

**wancosc356** · 08-12-2009, 11:21 PM

Anyone?

petey-pablo · 08-13-2009, 05:18 AM

I don't know if our trucks came stock with One Piece Driveshafts.. I have had two trucks a 71 and a 72 and been around several stock trucks long and short beds and never have seen them with One Piece Driveshafts, unless they were changed out. I am sure the experts will chime in...............

cdowns · 08-13-2009, 05:41 AM

best way to tell if driveshaft will work for any application is to take tape measure and measure what you need and what you got

**lks dcvn** · 08-13-2009, 07:30 AM

nicks05z71 · 08-13-2009, 07:40 AM

Quote:

Originally Posted by cdowns

best way to tell if driveshaft will work for any application is to take tape measure and measure what you need and what you got

x2

I have a 68 with a 3speed w/ overdrive that came with a single driveshaft.

Tx Firefighter · 08-13-2009, 11:18 AM

Short bed, 6 cylinder, 3 speed trucks all came with factory 1 piece driveshafts.

Ont67shortbox · 08-13-2009, 11:39 AM

I have a 1 piece driveshaft out of a 67 it was 53 inches,when I installed the BB it was 1 inch too long so I had it cut and rebalanced.

**wancosc356** · 08-13-2009, 01:10 PM

Thanks for the input guys. Not sure if it will work for my application cause I dont know what Im gonna go with. Just trying to find out if it is indeed from one of our trucks.

Tx Firefighter:
Thanks for clarifying that for me. This did come out of a short bed but not idea on the motor/trans. combo.

Ont67shortbox:
This one was out of a 67 too. Where did u take your measurement from? Thanks.

08-11-2009, 07:12 PM	#1
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	One piece drive shaft length? I picked up a one piece drive shaft that I believe to be out of a 67 swb. Just curious if someone could help me to verify that this is correct. I guess the only way to tell would be the length. Any one out there know what that is? Thanks Michael __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

08-12-2009, 11:21 PM	#2
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: One piece drive shaft length? Anyone? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

08-13-2009, 05:18 AM	#3
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: One piece drive shaft length? I don't know if our trucks came stock with One Piece Driveshafts.. I have had two trucks a 71 and a 72 and been around several stock trucks long and short beds and never have seen them with One Piece Driveshafts, unless they were changed out. I am sure the experts will chime in............... __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

08-13-2009, 05:41 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: One piece drive shaft length? best way to tell if driveshaft will work for any application is to take tape measure and measure what you need and what you got __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-13-2009, 07:30 AM	#5
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,344	Re: One piece drive shaft length?

08-13-2009, 11:18 AM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: One piece drive shaft length? Short bed, 6 cylinder, 3 speed trucks all came with factory 1 piece driveshafts. __________________ I'm on the Instagram- @Gearhead_Kevin

08-13-2009, 11:39 AM	#8
Ont67shortbox Registered User Join Date: May 2003 Location: Ontario Posts: 279	Re: One piece drive shaft length? I have a 1 piece driveshaft out of a 67 it was 53 inches,when I installed the BB it was 1 inch too long so I had it cut and rebalanced.

08-13-2009, 01:10 PM	#9
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: One piece drive shaft length? Thanks for the input guys. Not sure if it will work for my application cause I dont know what Im gonna go with. Just trying to find out if it is indeed from one of our trucks. Tx Firefighter: Thanks for clarifying that for me. This did come out of a short bed but not idea on the motor/trans. combo. Ont67shortbox: This one was out of a 67 too. Where did u take your measurement from? Thanks. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.