pic's of power steering set up's

[Vernski]

Does anyone have any pic's of power steering set up's for a 230 L6. My truck is a 65 GMC but Chevy's are the same so if you have some could you please post them? I used the search but came up empty. Thanks Vernski

[bubba327]

I just found a bracket on E-bay but do not have it installed yet. I think there might be a missing piece and could use pictures also. I am glad somebody else is gonna stay with the I-6!! I looked all over for this bracket, finally found it off a 70 Camaro.

[bubba327]

Hey Vernski-- welcome from Southern Idaho

[Vernski]

Hi Bubba thanks for the heads up and welcome. Well I bought a set of bracket and braces off ebay also and when I went to put them on nothing will fit. Well I got leperconned as in bend over buddy,[no offence if your Irish] but they were advertized as fitting a 230 L6. I hope you faired better than i did on ebay. Well I just needed some pic's to see if I'm headed in the right direction. I'm going to fab my own bracket if I can get an idea where they bolt up on a 230. That said I hope we can get some pic's to see how it should be. By the way where is Star at in Idaho I'm 8mi nw of CDA Thanks Vernski

[xratt]

great thread, now we need some pics. I'm starting this project on my 1966 C10, except i have a 305 sb. So I have to go junk yard hooping tomarrow to try and find my brackets. I have a 1986 power steering box and drag link. I'm hoping this will come close to fitting on my 1966 frame. I find find out more tomarrow.

[bubba327]

By the way where is Star at in Idaho

Between Eagle and Middleton, over the hill from Emmett
I have the correct bracket off a 250 I-6 camaro. It has been cut a little for header clearance. (No trouble to weld a piece back in) I found a E-Bay seller 's listing for the headers and sent a pm to him asking about the bracket and scored. I had been looking on the chevelle forums, nova -forums, H.A.M.B. the inliners etc (After looking here on the 60-66 boards first) Nothing in the local junk yards. Beginning to think I might have to fab my own. Planning on using a nova pump. I can send a pic tomorrow if you need.

[Captainfab]

Here are a couple of setups right here in the classifieds......I think they are both still available.....one for each of you

http://www.67-72chevytrucks.com/vboa...d.php?t=355548

[Vernski]

Hi Bubba yeah if you could post a pic of your bracket that would be great. I have mine drawn out but that's subject to change when or if I see something better thanks,---Vernski

[Vernski]

Originally Posted by Captainfab

Here are a couple of setups right here in the classifieds......I think they are both still available.....one for each of you

http://www.67-72chevytrucks.com/vboa...d.php?t=355548

Hey thanks John for the link, my bracket's look kinda like the one's on the left but the one I need is like the very bottom one on the right. I think I'm on the right track just need some pic's of the bracket and the rest of the set-up. Vernski:gmc2

[Vernski]

Hey Bubba I found this link check it out.Vernski http://67-72chevytrucks.com/vboard/s....php?p=3430543

[Corts60]

Here is the power steering set-up on my '60:

[Vernski]

Originally Posted by Corts60

Here is the power steering set-up on my '60:

???---Vernski Yeah I get it now Jolly Joker "Funny"

[Captainfab]

Those bolt on pulleys look like the ones for a small block with a short water pump. Which balancer do you guys have?

Originally Posted by Vernski

Hey Bubba I found this link check it out.Vernski http://67-72chevytrucks.com/vboard/s....php?p=3430543

[Vernski]

Originally Posted by Captainfab

Those bolt on pulleys look like the ones for a small block with a short water pump. Which balancer do you guys have?

Hi John my balancer is a single pulley and has bolt holes I for either a pulley puller or I guess you could bolt another pulley to it. I have no idea what the norm is for these engines but it is a 230.---Vernski

[bubba327]

I already have a double pulley set up on both crank and water pump . Hoped to get to the pump today but worked on the tilt column instead.

[Captainfab]

Originally Posted by Vernski

Hi John my balancer is a single pulley and has bolt holes I for either a pulley puller or I guess you could bolt another pulley to it. I have no idea what the norm is for these engines but it is a 230.---Vernski

So does your balancer have the pulley built in or is it seperate?

Originally Posted by bubba327

I already have a double pulley set up on both crank and water pump . Hoped to get to the pump today but worked on the tilt column instead.
Attachment 486221

Looks like you're part way there already Bruce.

[Vernski]

[QUOTE=Captainfab;3456234]So does your balancer have the pulley built in or is it seperate?

It looks like it's one piece, so I assume you can bolt another pulley to it? Or do I have to get another one? Also where can I find either? Thanks---Vernski

[Captainfab]

[quote=Vernski;3456741]

Originally Posted by Captainfab

So does your balancer have the pulley built in or is it seperate?

It looks like it's one piece, so I assume you can bolt another pulley to it? Or do I have to get another one? Also where can I find either? Thanks---Vernski

If it is the same crank pulley as a small block with a short water pump, I have a couple. I don't have anything for the water pump pulley though.

[Vernski]

[quote=Captainfab;3458038]

Originally Posted by Vernski

If it is the same crank pulley as a small block with a short water pump, I have a couple. I don't have anything for the water pump pulley though.

Thanks John that's one step closer will give you a call when I can pick one up, I hope it fits my luck has not been good lately on things fitting well. On another note did you get those instructions on the adapter plate formatted yet? if not is it possible to print them out somehow and I could pick them up? Just a thought thanks Cap.---Vern

[Captainfab]

[quote=Vernski;3458103]

Originally Posted by Captainfab

Thanks John that's one step closer will give you a call when I can pick one up, I hope it fits my luck has not been good lately on things fitting well. On another note did you get those instructions on the adapter plate formatted yet? if not is it possible to print them out somehow and I could pick them up? Just a thought thanks Cap.---Vern

Yeah printing them is no problem. I haven't had time to figure out how to reduce the file size to email them.....I'm not quite that computer savy yet. I'll print another set right now.

[Vernski]

http://67-72chevytrucks.com/vboard/s....php?p=3431900

Here is another thread of pic's and stuff. Vernski