The beginning of the unnamed 64 build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SuperWho · 08-13-2009, 11:16 AM

Hey guys, found this site, and thought I would post up. Lots of great builds and info here. Long story short, got this truck for 800 bucks from my father in law. Sat 5 years, has a 350 with 700r4. Went out and got it running in no time. Still runs like a champ with only problem so far being a header leak, from a warped header on the driver side. Haven't decided what route to go, but rat rod seems to be at the top of my options.

Look forward to you guys' input and suggestions. Sorry no burnout yet, gotta get some new meats on the back.

1964C10 · 08-13-2009, 11:30 AM

Congrats on the build start! It's a great day! Looking forward to more pictures. And Welcome to the board!

SuperWho · 08-13-2009, 11:33 AM

Quote:

Originally Posted by 1964C10

Congrats on the build start! It's a great day! Looking forward to more pictures. And Welcome to the board!

Thanks, I'm actually reading through your build right now.

MacAttack · 08-13-2009, 11:42 AM

Mac.

1964C10 · 08-13-2009, 12:30 PM

Quote:

Originally Posted by SuperWho

Thanks, I'm actually reading through your build right now.

Cool! I am learning myself as you can see lol.

BTW keep it schlong!!!

SuperWho · 08-13-2009, 09:02 PM

Quote:

Originally Posted by 1964C10

Cool! I am learning myself as you can see lol.

BTW keep it schlong!!!

Oh yeah, it's gonna stay a schlong bed. Between this and finding a new house, I have a full plate. Hope I can find a house with a shop or big garage.

SuperWho · 08-13-2009, 09:04 PM

Quote:

Originally Posted by MacAttack

Mac.

Thanks Mac!

**aerotruk63** · 08-13-2009, 09:08 PM

Good luck with both your projects, as you will see there's plenty of help around here and a few characters as well."Warped" sounds like a good name!

lonestarluck · 08-13-2009, 11:07 PM

long beds look cool slammed and ratty what part of texas are you in

hewlett2002000 · 08-13-2009, 11:20 PM

welcome from fort worth, tx. i would swear ive seen that truck somewhere. where was it sitting, if i may ask?
again welcome.
John

**Captainfab** · 08-14-2009, 12:19 AM

Welcome to the board

Looks like a good truck to work with.

SuperWho · 08-14-2009, 03:21 AM

Quote:

Originally Posted by lonestarluck

long beds look cool slammed and ratty what part of texas are you in

I'm about 30 miles east of Dallas

Quote:

Originally Posted by hewlett2002000

welcome from fort worth, tx. i would swear ive seen that truck somewhere. where was it sitting, if i may ask?
again welcome.
John

Probably not, it's completely hidden from view of the road.

Quote:

Originally Posted by Captainfab

Welcome to the board

Looks like a good truck to work with.

Thanks, Only one very workable dent on the driver side bed, lower half.

Dinos63 · 08-14-2009, 12:05 PM

WELCOME BRO

retodd7711 · 08-14-2009, 08:35 PM

Howdy from Tennessee!
Keep us posted on your progress.
Ask all the questions you need answers to.
Here's a link to the Texas side of the board.
http://67-72chevytrucks.com/vboard/f...play.php?f=132
If you get the chance, meet up with a few members.
Take the time to read through the posts on this board,
chances are somebody was in the same situation as you,
and the tips and tricks you will learn are priceless!

SuperWho · 08-14-2009, 09:04 PM

Quote:

Originally Posted by retodd7711

Howdy from Tennessee!
Keep us posted on your progress.
Ask all the questions you need answers to.
Here's a link to the Texas side of the board.
http://67-72chevytrucks.com/vboard/f...play.php?f=132
If you get the chance, meet up with a few members.
Take the time to read through the posts on this board,
chances are somebody was in the same situation as you,
and the tips and tricks you will learn are priceless!

Thanks. Definitely see some e-brake questions in the future

**ChiefRocka** · 08-14-2009, 09:09 PM

Glad to have you.....

SuperWho · 09-01-2009, 09:19 AM

Got her home with no problems. Ran perfect. Her's how she sits now.

**ChiefRocka** · 09-01-2009, 10:03 AM

Sweet...

jason65 · 09-01-2009, 10:23 AM

Nice job dude. It looks like a whole different truck.

SuperWho · 09-01-2009, 11:29 AM

Quote:

Originally Posted by ChiefRocka

Sweet...

Quote:

Originally Posted by jason65

Nice job dude. It looks like a whole different truck.

I agree. It's rattle can satin black for now. I just think these long beds look good in satin black, and leaving the white stripe and top set it off. I had thought about going all black, but when I pulled the tape off, it just looked right. Gotta polish up the chrome now to make it shine and order some white letter for the tailgate.

SuperWho · 09-01-2009, 11:33 AM

Quote:

Originally Posted by ChiefRocka

Sweet...

I may need to set an appointment up to have a custom name given to my truck.
Still haven't come up with one.

chillware · 09-01-2009, 05:03 PM

haha, cool! I used to have the same exact triple gauge set in my truck in the same spot, and a damn similar tach, lol!

good luck!

08-13-2009, 11:16 AM	#1
SuperWho Registered User Join Date: Aug 2009 Location: Texas Posts: 111	The beginning of the unnamed 64 build Hey guys, found this site, and thought I would post up. Lots of great builds and info here. Long story short, got this truck for 800 bucks from my father in law. Sat 5 years, has a 350 with 700r4. Went out and got it running in no time. Still runs like a champ with only problem so far being a header leak, from a warped header on the driver side. Haven't decided what route to go, but rat rod seems to be at the top of my options. Look forward to you guys' input and suggestions. Sorry no burnout yet, gotta get some new meats on the back.

08-13-2009, 11:30 AM	#2
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: The beginning of the unnamed 64 build Congrats on the build start! It's a great day! Looking forward to more pictures. And Welcome to the board! __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

08-13-2009, 11:42 AM	#4
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: The beginning of the unnamed 64 build Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

08-13-2009, 09:08 PM	#8
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: The beginning of the unnamed 64 build Good luck with both your projects, as you will see there's plenty of help around here and a few characters as well."Warped" sounds like a good name! __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 08-13-2009 at 09:14 PM.

08-13-2009, 11:07 PM	#9
lonestarluck Registered User Join Date: Jun 2009 Location: San Antonio TX Posts: 52	Re: The beginning of the unnamed 64 build long beds look cool slammed and ratty what part of texas are you in

08-13-2009, 11:20 PM	#10
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: The beginning of the unnamed 64 build welcome from fort worth, tx. i would swear ive seen that truck somewhere. where was it sitting, if i may ask? again welcome. John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

08-14-2009, 12:19 AM	#11
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: The beginning of the unnamed 64 build Welcome to the board Looks like a good truck to work with. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-14-2009, 12:05 PM	#13
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: The beginning of the unnamed 64 build WELCOME BRO __________________ CHEVY ONLY... Nothin Else !

08-14-2009, 08:35 PM	#14
retodd7711 chrome makes it go FASTER! Join Date: Feb 2007 Location: Cleveland Tennessee Posts: 2,884	Re: The beginning of the unnamed 64 build Howdy from Tennessee! Keep us posted on your progress. Ask all the questions you need answers to. Here's a link to the Texas side of the board. http://67-72chevytrucks.com/vboard/f...play.php?f=132 If you get the chance, meet up with a few members. Take the time to read through the posts on this board, chances are somebody was in the same situation as you, and the tips and tricks you will learn are priceless! __________________ She can't cook and she won't clean. But she looks good in a skirt and she brings me beer. She can stay for now. EDIT:: But she left me anyway, So forget her. 1962 GMC Stepside V6 4 speed My rolling resto thread http://67-72chevytrucks.com/vboard/s...d.php?t=324226 My old farm truck http://67-72chevytrucks.com/vboard/s...=1#post3465005

08-14-2009, 09:09 PM	#16
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: The beginning of the unnamed 64 build Glad to have you..... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

09-01-2009, 09:19 AM	#17
SuperWho Registered User Join Date: Aug 2009 Location: Texas Posts: 111	Re: The beginning of the unnamed 64 build Got her home with no problems. Ran perfect. Her's how she sits now.

09-01-2009, 10:03 AM	#18
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: The beginning of the unnamed 64 build Sweet... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

09-01-2009, 10:23 AM	#19
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: The beginning of the unnamed 64 build Nice job dude. It looks like a whole different truck.

09-01-2009, 05:03 PM	#22
chillware Registered User Join Date: Jun 2009 Location: Roseville, CA Posts: 246	Re: The beginning of the unnamed 64 build haha, cool! I used to have the same exact triple gauge set in my truck in the same spot, and a damn similar tach, lol! good luck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.