WIW - Dana60/14Bolt/TH400 from CUCV - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 01-27-2009, 09:07 PM

I'm looking to pick up a totaled M1008 K-30 and am wondering what the going rate for the axles are...

anything else worth value on the truck?

TH400?
NP208?
hydroboost?

rest will be scrapped...

thanks...

**clay68c10** · 01-27-2009, 10:59 PM

I'd say $100 for the hydroboost, and at least that much for the 400/208.

jdstx · 01-27-2009, 11:15 PM

I got $95 for a 400 w/ convertor sold as a core about a year ago.

msgross · 01-28-2009, 08:09 PM

are the axles still going for about $1500 though?

manimal · 01-28-2009, 08:31 PM

Depends on your area. I have seen them here in Cali for 500-1500,just depends. Good Luck!
-Lance

msgross · 02-14-2009, 01:09 PM

truck sold for $700, not worth the investment just to part it out for me...

**WIDESIDE72** · 02-15-2009, 10:27 AM

The way the economy is right now, I am only buying things (very few)if it is worth something TO ME. A couple of years ago, you could easily get $1200-$1500 for a 14 bolt FF rear and a Dana 60 front. Now it is kinda iffy. I don't buy anything thinking I am going to turn it the next day for double the money. Be prepared to sit on anything you buy for a while... I was out of work from a lay off from June- right before Christmas, and then had to take a lower paying job. I found out I am going to be a dad (first time) last week! My wife and I talked about "waiting til we could afford it". We are both 37 y.o, so we thought that that would never happen (affording it). We have some $$$ saved, she has a decent job, mortgage is only $600, we have a rental property for extra $$$ and only one car payment, so we decided we better get busy! BTW, you guys need topony up and buy some of the stuff I have for sale!!!

msgross · 02-15-2009, 10:33 AM

I'll trade you some baby stuff for truck stuff... I have a ton to get rid of... my youngest is now 3 so it's all guns and helicopters for him! Congrats though...

And I have been told that you can never afford them! (kids that is)...

$600 house payment? wow, my taxes are $350 a month alone...

But as far as flipping parts, I agree. This truck was a good $400-$500 buy but not $700+ fees. An holding onto 1,000lbs of axles isn't easy either!

**special-K** · 02-15-2009, 01:02 PM

Kids are free.It`s the delivery,handling,prep and upkeep that kill ya.

**jerry moss** · 02-15-2009, 01:24 PM

i agree on buying something just to try making a buck, the flipping economy is in the crapper. i let a 78 shortbed fleetside, 2wd go at an auction for 60 bucks last week.i was going to bid on it for parts for my 77 blazer but got to thinking about it and walked off. this truck was in excellent condition except for the left front fender. it was 100% rustfree and in original paint still. i talked with the guy that bought it and i might be able to get the sheetmetal i want after he pulls the motor. i don't have anywhere to strip it anymore and no place to store it if i had bought it so i'll try getting the parts i want and he can haul the leftovers to the scrap yard.

Longhorn Man · 02-15-2009, 07:48 PM

moved to the 73 - 87 page

GM72K10 · 08-16-2009, 04:25 PM

When the price for a parts truck is REALLY cheap, its worth it, no matter what. (At least that's what I keep telling myself) Got two CUCV M1008s at a state live auction this past week, trucks were NOT at the auction. Got the first one for $25.00 (plus 150.00 auction fee, etc total of about $250.00) and the second one, a complete running "flintstone floorboard" truck, for $100.00 (plus 150.00 auction fees, taxes, etc. for a total of about $350.00). Two minor drawbacks, the first one was at a state prison for recovery (hour long round trip) and the second was at a state mental hospital (10 hour round trip) Already sold the first one for more than the cost of the trailer rental, fuel and cost of the two trucks combined. Keeping the second one to fix a third one. The fun never ends.

01-27-2009, 09:07 PM	#1
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	WIW - Dana60/14Bolt/TH400 from CUCV I'm looking to pick up a totaled M1008 K-30 and am wondering what the going rate for the axles are... anything else worth value on the truck? TH400? NP208? hydroboost? rest will be scrapped... thanks... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-27-2009, 10:59 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,971	Re: WIW - Dana60/14Bolt/TH400 from CUCV I'd say $100 for the hydroboost, and at least that much for the 400/208. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

01-27-2009, 11:15 PM	#3
jdstx Registered User Join Date: Jun 2007 Location: Texas Posts: 63	Re: WIW - Dana60/14Bolt/TH400 from CUCV I got $95 for a 400 w/ convertor sold as a core about a year ago.

01-28-2009, 08:09 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - Dana60/14Bolt/TH400 from CUCV are the axles still going for about $1500 though? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-28-2009, 08:31 PM	#5
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: WIW - Dana60/14Bolt/TH400 from CUCV Depends on your area. I have seen them here in Cali for 500-1500,just depends. Good Luck! -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

02-14-2009, 01:09 PM	#6
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - Dana60/14Bolt/TH400 from CUCV truck sold for $700, not worth the investment just to part it out for me... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 02-14-2009 at 01:09 PM.

02-15-2009, 10:27 AM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WIW - Dana60/14Bolt/TH400 from CUCV The way the economy is right now, I am only buying things (very few)if it is worth something TO ME. A couple of years ago, you could easily get $1200-$1500 for a 14 bolt FF rear and a Dana 60 front. Now it is kinda iffy. I don't buy anything thinking I am going to turn it the next day for double the money. Be prepared to sit on anything you buy for a while... I was out of work from a lay off from June- right before Christmas, and then had to take a lower paying job. I found out I am going to be a dad (first time) last week! My wife and I talked about "waiting til we could afford it". We are both 37 y.o, so we thought that that would never happen (affording it). We have some $$$ saved, she has a decent job, mortgage is only $600, we have a rental property for extra $$$ and only one car payment, so we decided we better get busy! BTW, you guys need topony up and buy some of the stuff I have for sale!!! Last edited by WIDESIDE72; 02-15-2009 at 10:28 AM.

02-15-2009, 10:33 AM	#8
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - Dana60/14Bolt/TH400 from CUCV I'll trade you some baby stuff for truck stuff... I have a ton to get rid of... my youngest is now 3 so it's all guns and helicopters for him! Congrats though... And I have been told that you can never afford them! (kids that is)... $600 house payment? wow, my taxes are $350 a month alone... But as far as flipping parts, I agree. This truck was a good $400-$500 buy but not $700+ fees. An holding onto 1,000lbs of axles isn't easy either! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-15-2009, 01:02 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: WIW - Dana60/14Bolt/TH400 from CUCV Kids are free.It`s the delivery,handling,prep and upkeep that kill ya. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-15-2009, 01:24 PM	#10
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,899	Re: WIW - Dana60/14Bolt/TH400 from CUCV i agree on buying something just to try making a buck, the flipping economy is in the crapper. i let a 78 shortbed fleetside, 2wd go at an auction for 60 bucks last week.i was going to bid on it for parts for my 77 blazer but got to thinking about it and walked off. this truck was in excellent condition except for the left front fender. it was 100% rustfree and in original paint still. i talked with the guy that bought it and i might be able to get the sheetmetal i want after he pulls the motor. i don't have anywhere to strip it anymore and no place to store it if i had bought it so i'll try getting the parts i want and he can haul the leftovers to the scrap yard. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-15-2009, 07:48 PM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: WIW - Dana60/14Bolt/TH400 from CUCV moved to the 73 - 87 page

08-16-2009, 04:25 PM	#12
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,482	Re: WIW - Dana60/14Bolt/TH400 from CUCV When the price for a parts truck is REALLY cheap, its worth it, no matter what. (At least that's what I keep telling myself) Got two CUCV M1008s at a state live auction this past week, trucks were NOT at the auction. Got the first one for $25.00 (plus 150.00 auction fee, etc total of about $250.00) and the second one, a complete running "flintstone floorboard" truck, for $100.00 (plus 150.00 auction fees, taxes, etc. for a total of about $350.00). Two minor drawbacks, the first one was at a state prison for recovery (hour long round trip) and the second was at a state mental hospital (10 hour round trip) Already sold the first one for more than the cost of the trailer rental, fuel and cost of the two trucks combined. Keeping the second one to fix a third one. The fun never ends. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck Last edited by GM72K10; 08-16-2009 at 04:27 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.