Is my 87' stock seat supposed to latch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

92470 · 07-22-2009, 02:19 PM

I have a 1987 V10 Silverado with the stock seat in it. Right now, I can grab the back and it just folds forward. Was it originally supposed to latch and release with the pull up lever like most trucks? If I pull the seat forward, I can see a thin metal "lever" on both sides that rotates on the seat hinge. They are both rotated so they are "sitting" toward the bottom of the seat and if they are not a latch, I don't know the purpose of them is. I was just wondering if somehow they got disengaged from the seat and fell down.

Any advice? Thanks

3r!c84 · 07-22-2009, 02:30 PM

mine just folds over
i dont see any lever.

JohnC · 07-22-2009, 02:51 PM

I don't think they latch. My old 84 didn't

texasfunk · 07-22-2009, 02:52 PM

some of them are originally supposed to latch, but all the ones i have had that do have a latch dont latch anymore, it just gives out

**old Rusty C10** · 07-22-2009, 04:35 PM

some do some dont but if you dont have a lever it isnt suppoused to latch

smashingchuck · 07-22-2009, 04:57 PM

Hmm, I was wondering about this too... my 78 latched but I noticed my 87 never even had one. Interesting.

**nlped** · 07-22-2009, 06:17 PM

My '87 latches...curious

Driveway Dreams · 07-22-2009, 06:37 PM

No latch on my 86 Custom Deluxe.

**N2TRUX** · 07-22-2009, 06:44 PM

My 77 latches.

keith61760 · 07-22-2009, 07:04 PM

My 84 seat in my 77 doesn't. Looks like its supposed too.

ElGracho · 07-22-2009, 07:43 PM

81-87 seats don't have a lever on the back to unlatch them.

They only latch when a pendulum swings forward and engages the teeth that are part of the seat hinge. That should only happen on a really sudden stop or a frontal collision.

Your seat is working as designed.

92470 · 07-22-2009, 11:14 PM

Quote:

Originally Posted by ElGracho

81-87 seats don't have a lever on the back to unlatch them.

They only latch when a pendulum swings forward and engages the teeth that are part of the seat hinge. That should only happen on a really sudden stop or a frontal collision.

Your seat is working as designed.

I haven't ever heard this, but it makes sense I guess. The metal "levers" on both sides do swing on the tube that in the outer part of the seat base like a pendulum, so I'll take that as the answer. Thanks!

smashingchuck · 07-22-2009, 11:24 PM

Leave it to Joe to chime in with the correct answer!!

Keith Seymore · 07-23-2009, 07:52 AM

Quote:

Originally Posted by ElGracho

81-87 seats don't have a lever on the back to unlatch them.

They only latch when a pendulum swings forward and engages the teeth that are part of the seat hinge. That should only happen on a really sudden stop or a frontal collision.

Your seat is working as designed.

Correct. It's called an "inertial latch".

K

Adams74Chevy · 07-23-2009, 07:58 AM

My father's 87 does not latch and he's the 2nd owner and he knew the 1st owner so the seat was original.

Keith Seymore · 07-23-2009, 08:01 AM

Quote:

Originally Posted by Adams74Chevy

My father's 87 does not latch and he's the 2nd owner and he knew the 1st owner so the seat was original.

Oops... I probably should have mentioned I am the original owner of my '87 and it does not latch.

JohnC · 07-23-2009, 08:41 AM

Thanks for the clarification Joe!

bumslie75 · 07-24-2009, 02:21 AM

My 87 dont latch

Keith Seymore · 08-20-2009, 06:39 AM

Just to follow up on this one a bit:

When I was working on my truck last night I noticed you can actually see the pendulum and corresponding parts on the seat.

Here you can see the "sawtooth", or projections that the pendulum catches on:

...and if you look down inside you can see the pendulum itself. (Here you are looking at the edge of it). It swings forward based on the inertia and grabs those sawtooths on the hinge portion during an aggressive stop or collision:

FWIW

07-22-2009, 02:19 PM	#1
92470 Registered User Join Date: Nov 2006 Location: Maple Grove, MN Posts: 149	Is my 87' stock seat supposed to latch? I have a 1987 V10 Silverado with the stock seat in it. Right now, I can grab the back and it just folds forward. Was it originally supposed to latch and release with the pull up lever like most trucks? If I pull the seat forward, I can see a thin metal "lever" on both sides that rotates on the seat hinge. They are both rotated so they are "sitting" toward the bottom of the seat and if they are not a latch, I don't know the purpose of them is. I was just wondering if somehow they got disengaged from the seat and fell down. Any advice? Thanks

07-22-2009, 02:30 PM	#2
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: Is my 87' stock seat supposed to latch? mine just folds over i dont see any lever. __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

07-22-2009, 02:51 PM	#3
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Is my 87' stock seat supposed to latch? I don't think they latch. My old 84 didn't

07-22-2009, 02:52 PM	#4
texasfunk Registered User Join Date: Jun 2009 Location: Lubbock, TX Posts: 1,671	Re: Is my 87' stock seat supposed to latch? some of them are originally supposed to latch, but all the ones i have had that do have a latch dont latch anymore, it just gives out Last edited by texasfunk; 07-22-2009 at 02:54 PM.

07-22-2009, 04:35 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Is my 87' stock seat supposed to latch? some do some dont but if you dont have a lever it isnt suppoused to latch __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

07-22-2009, 04:57 PM	#6
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Is my 87' stock seat supposed to latch? Hmm, I was wondering about this too... my 78 latched but I noticed my 87 never even had one. Interesting. __________________ 78 Build Thread 4Runner Build

07-22-2009, 06:17 PM	#7
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Is my 87' stock seat supposed to latch? My '87 latches...curious __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-22-2009, 06:37 PM	#8
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Is my 87' stock seat supposed to latch? No latch on my 86 Custom Deluxe. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

07-22-2009, 06:44 PM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Is my 87' stock seat supposed to latch? My 77 latches. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

07-22-2009, 07:04 PM	#10
keith61760 Registered User Join Date: Jul 2008 Location: Lemoore, Ca Posts: 161	Re: Is my 87' stock seat supposed to latch? My 84 seat in my 77 doesn't. Looks like its supposed too.

07-22-2009, 07:43 PM	#11
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Re: Is my 87' stock seat supposed to latch? 81-87 seats don't have a lever on the back to unlatch them. They only latch when a pendulum swings forward and engages the teeth that are part of the seat hinge. That should only happen on a really sudden stop or a frontal collision. Your seat is working as designed. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

07-22-2009, 11:24 PM	#13
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Is my 87' stock seat supposed to latch? Leave it to Joe to chime in with the correct answer!! __________________ 78 Build Thread 4Runner Build

07-23-2009, 07:58 AM	#15
Adams74Chevy Registered User Join Date: Mar 2009 Location: MD Posts: 417	Re: Is my 87' stock seat supposed to latch? My father's 87 does not latch and he's the 2nd owner and he knew the 1st owner so the seat was original. __________________ 2006 Silverado Crew Cab 1500 4x4 5.3L automatic 1986 M1008 CUCV 6.2L Detroit Diesel TH400 4.56 Detroit Locker rear NP208 1973 K20 "Silverado" 350ci, HEI, TH350, NP203 with 2wd conversion, A/C, power windows,tilt wheel, dual tanks. My '73ish K20 thread My 5yo son claims it as his. 1987 V20 Custom Deluxe 350 TH400 NP208 "farm truck" getting parted out. 2016 Nissan Altima grocery getter/commuter

07-23-2009, 08:41 AM	#17
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Is my 87' stock seat supposed to latch? Thanks for the clarification Joe!

07-24-2009, 02:21 AM	#18
bumslie75 Registered User Join Date: Apr 2009 Location: Reedley Ca Posts: 360	Re: Is my 87' stock seat supposed to latch? My 87 dont latch



Register or Log In To remove these advertisements.

08-20-2009, 06:39 AM	#19
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,226	Re: Is my 87' stock seat supposed to latch? Just to follow up on this one a bit: When I was working on my truck last night I noticed you can actually see the pendulum and corresponding parts on the seat. Here you can see the "sawtooth", or projections that the pendulum catches on: ...and if you look down inside you can see the pendulum itself. (Here you are looking at the edge of it). It swings forward based on the inertia and grabs those sawtooths on the hinge portion during an aggressive stop or collision: FWIW __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

Register or Log In To remove these advertisements.