ECE drop spindles and disk brake conversion install was easy and smooth...until... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jayman931 · 08-17-2009, 06:02 PM

Well...the install was pretty much easy...and step by step.....alot of good tips on this site...however there was something I wasn't made aware of.....

I go to put my Orignal wheels on and they rub the calipers...8*(

Disk break conversion will not work with original wheels... 8*(

My 69' c-10 has 88,000 and its a stocker.....guess i will be getting new wheels before I had planned

**lolife99** · 08-17-2009, 06:21 PM

Yep the original 15x6.5" wheels hit the calipers.
Look for 73-87 4x4 plain steel wheels. These should work fine and look the same with your hubcaps installed. The should also be relatively cheap.

Jayman931 · 08-17-2009, 06:38 PM

thanks...will do.....

the stance after the 2.5 inch drop spindles look soooooooo good!

SCOTI · 08-17-2009, 06:56 PM

That's info that does need to be included upon purchasing the components IMO. The OE 60's truck wheels fit drums only. Bummer you found out the hard way.

Did your plans include swapping to different wheels eventually?

shifty · 08-17-2009, 07:55 PM

am i going to run into problems with the stock steelies i pulled off of a 80's model G10/G20 van?

(i bought them b/c i have beauty rings and baby moons to fit)

**lolife99** · 08-17-2009, 08:21 PM

No,... those vans had disc brakes.

Jayman931 · 08-17-2009, 11:24 PM

scoti- yes...i am eventually gonna bag it and get new wheels...but that wasn't gonna be till next year...I my friend has 2 c-10s and he's letting me borrow his wheels (one is stripped down to the frame) till I find some i can use......im not gonna buy the good stuff till my trucks ready...thanks for your help

72BlckButy · 08-18-2009, 08:18 AM

Okay now... you can't just post that you've installed these pieces and now post some pictures of the end result.

Congrats on the install, and I ran into a similar issue with my '69. Luckily I had a set of rally wheels which provided the right offset for the disc brake upgrade, but I did attempt to install a stock 15x6.5" rim and had the same end result. I'm reading into your posts, but it sounds like you kept the 6-lug setup, is that right?

Jayman931 · 08-18-2009, 11:38 AM

Ok...i'll take pics when I get back to work on it tonight.....i'll also take pics of is stripped C-10 and his C-10 with the Corvette engine in it...

Ben IV · 08-18-2009, 07:03 PM

Yep i found out the hard way too, suprise purchases like that are allways nice

Jayman931 · 08-19-2009, 01:29 PM

Ok...I know how you all like pics....Several of the brakes...several of the new stance...notice the grease pen inspection.... 960 BL and 960 R...anyone know what that means?...and a few projects in motion (my buddies)

72BlckButy · 08-19-2009, 01:38 PM

Great pics, thanks for sharing!

We ran into issues while installing my proportioning valve because I didn't run the booster. So... we had to do some bracket/line modifications.

Name: DSCN4898.jpg
Views: 562
Size: 71.8 KB

jojo · 08-21-2009, 12:25 PM

Looking good. I'm getting ready to move on some discs too.

I got rally's on mine I assume they aren't original so do you guys think they'll rub?

72BlckButy · 08-21-2009, 01:29 PM

Rally are not original to the 67-72 era of trucks, but they definitely look good. As far as determining if they will fit, there's a few things we would need to know before answering that question....

Are you keeping the 6-lug setup or swapping to 5-lug?

If sticking with the 6-lug setup, a 15x8 6-lug rally will work, but you run the risk of possibly rubbing the inner fender (considering your are going to lower your truck). A 15x7 6-lug rally (which does exist) would be your better choice (if you lower your truck) as it will pull your wheels back in.

See when you add front discs to a 67-70 truck/burb/blazer, it will widen the track 1.5" across the front. If you will be keeping your narrower rearend (67-70 early) then your front wheels would be wider than the rear wheels.

jojo · 08-21-2009, 04:34 PM

Yeah I plan on sticking with 6 lug. Do you think it will rub fenders with 15X8 rally's with only a 3" drop up front? I was looking for 2" disc spindles and 1" coils.

08-17-2009, 06:02 PM	#1
Jayman931 Registered User Join Date: Oct 2006 Location: Hattiesburg, MS Posts: 137	ECE drop spindles and disk brake conversion install was easy until...PICS Well...the install was pretty much easy...and step by step.....alot of good tips on this site...however there was something I wasn't made aware of..... I go to put my Orignal wheels on and they rub the calipers...8( Disk break conversion will not work with original wheels... 8( My 69' c-10 has 88,000 and its a stocker.....guess i will be getting new wheels before I had planned __________________ The stupidty of your actions is directly proportionate to the number of people watching you... Last edited by Jayman931; 08-19-2009 at 01:31 PM. Reason: personal preference for title change

08-17-2009, 06:21 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: ECE drop spindles and disk break conversion install was easy and smooth...until.. Yep the original 15x6.5" wheels hit the calipers. Look for 73-87 4x4 plain steel wheels. These should work fine and look the same with your hubcaps installed. The should also be relatively cheap. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 08-17-2009 at 06:21 PM.

08-17-2009, 06:38 PM	#3
Jayman931 Registered User Join Date: Oct 2006 Location: Hattiesburg, MS Posts: 137	Re: ECE drop spindles and disk break conversion install was easy and smooth...until.. thanks...will do..... the stance after the 2.5 inch drop spindles look soooooooo good! __________________ The stupidty of your actions is directly proportionate to the number of people watching you...

08-17-2009, 06:56 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,943	Re: ECE drop spindles and disk break conversion install was easy and smooth...until.. That's info that does need to be included upon purchasing the components IMO. The OE 60's truck wheels fit drums only. Bummer you found out the hard way. Did your plans include swapping to different wheels eventually? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-17-2009, 07:55 PM	#5
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: ECE drop spindles and disk break conversion install was easy and smooth...until.. am i going to run into problems with the stock steelies i pulled off of a 80's model G10/G20 van? (i bought them b/c i have beauty rings and baby moons to fit) __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 08-18-2009 at 08:35 AM.

08-17-2009, 08:21 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: ECE drop spindles and disk break conversion install was easy and smooth...until.. No,... those vans had disc brakes. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-17-2009, 11:24 PM	#7
Jayman931 Registered User Join Date: Oct 2006 Location: Hattiesburg, MS Posts: 137	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. scoti- yes...i am eventually gonna bag it and get new wheels...but that wasn't gonna be till next year...I my friend has 2 c-10s and he's letting me borrow his wheels (one is stripped down to the frame) till I find some i can use......im not gonna buy the good stuff till my trucks ready...thanks for your help __________________ The stupidty of your actions is directly proportionate to the number of people watching you...

08-18-2009, 08:18 AM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. Okay now... you can't just post that you've installed these pieces and now post some pictures of the end result. Congrats on the install, and I ran into a similar issue with my '69. Luckily I had a set of rally wheels which provided the right offset for the disc brake upgrade, but I did attempt to install a stock 15x6.5" rim and had the same end result. I'm reading into your posts, but it sounds like you kept the 6-lug setup, is that right? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-18-2009, 11:38 AM	#9
Jayman931 Registered User Join Date: Oct 2006 Location: Hattiesburg, MS Posts: 137	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. Ok...i'll take pics when I get back to work on it tonight.....i'll also take pics of is stripped C-10 and his C-10 with the Corvette engine in it... __________________ The stupidty of your actions is directly proportionate to the number of people watching you...

08-18-2009, 07:03 PM	#10
Ben IV Registered User Join Date: Dec 2006 Location: Glenpool OK Posts: 255	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. Yep i found out the hard way too, suprise purchases like that are allways nice __________________ 70 GMC custom short bed conversion 69 GMC panel truck

08-19-2009, 01:29 PM	#11
Jayman931 Registered User Join Date: Oct 2006 Location: Hattiesburg, MS Posts: 137	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. Ok...I know how you all like pics....Several of the brakes...several of the new stance...notice the grease pen inspection.... 960 BL and 960 R...anyone know what that means?...and a few projects in motion (my buddies) __________________ The stupidty of your actions is directly proportionate to the number of people watching you... Last edited by Jayman931; 08-19-2009 at 01:38 PM.

08-19-2009, 01:38 PM	#12
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. Great pics, thanks for sharing! We ran into issues while installing my proportioning valve because I didn't run the booster. So... we had to do some bracket/line modifications. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-21-2009, 12:25 PM	#13
jojo printing is my trade Join Date: May 2009 Location: San Antonio, Texas Posts: 349	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. Looking good. I'm getting ready to move on some discs too. I got rally's on mine I assume they aren't original so do you guys think they'll rub? __________________ Jojo's '70 stepside build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=344184

08-21-2009, 01:29 PM	#14
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. Rally are not original to the 67-72 era of trucks, but they definitely look good. As far as determining if they will fit, there's a few things we would need to know before answering that question.... Are you keeping the 6-lug setup or swapping to 5-lug? If sticking with the 6-lug setup, a 15x8 6-lug rally will work, but you run the risk of possibly rubbing the inner fender (considering your are going to lower your truck). A 15x7 6-lug rally (which does exist) would be your better choice (if you lower your truck) as it will pull your wheels back in. See when you add front discs to a 67-70 truck/burb/blazer, it will widen the track 1.5" across the front. If you will be keeping your narrower rearend (67-70 early) then your front wheels would be wider than the rear wheels. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-21-2009, 04:34 PM	#15
jojo printing is my trade Join Date: May 2009 Location: San Antonio, Texas Posts: 349	Re: ECE drop spindles and disk brake conversion install was easy and smooth...until.. Yeah I plan on sticking with 6 lug. Do you think it will rub fenders with 15X8 rally's with only a 3" drop up front? I was looking for 2" disc spindles and 1" coils. __________________ Jojo's '70 stepside build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=344184



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.